Commit Graph

90 Commits

Author SHA1 Message Date
Christoph Kords 8739b9522e dislocation stress does not add to stress field anymore, but is only available as constitutive output for purposes of postprocessing. instead, we now use a backstress term (which is added to the resolved shear stress) that depends on the gradient of excess density on the same slip system. 2012-01-17 10:26:57 +00:00
Christoph Kords 860594d9a4 forgot to multiply shearrate with timestep in order to get accumulated shear 2011-11-09 10:26:00 +00:00
Christoph Kords 6dc8a4d530 check for LFC only if there is any slip activity at all; also increased safety factor from 1.2 to 1.5 2011-11-09 09:55:39 +00:00
Christoph Kords 7033e84fc7 new outputs "accumulatedshear", "velocity_edge", and "velocity_screw" (the latter two replace the output "dislocationvelocity") 2011-11-09 09:22:52 +00:00
Christoph Kords 8bc39fcd48 immobile density output keeps its sign 2011-11-07 15:46:40 +00:00
Christoph Kords 34adec74e8 corrected wrong indices into state array for velocity 2011-11-07 15:17:58 +00:00
Christoph Kords 7dfb96a3da constitutive_nonlocal:
dislocation velocities are stored in the state, so we actually now have three "parts" of the state, the basic states that are updated by "constitutive_dotState" come first, then the dependent states that are calculated by "constitutive_microstructure" follow, and finally we have a last part reserved for other variables that just use the memory reserved by the state array and are updated somewhere else.

constitutive:

LpAndItsTangent does not need the full state, but only the local state, so changed that at least for the nonlocal constitutive law
2011-11-04 13:12:17 +00:00
Martin Diehl 8ac1891b3c moved DAMASK_NaN to prec.f90 respectively prec_single.f90 as it is precision dependent 2011-10-20 16:46:11 +00:00
Christoph Kords 7be2701989 * new output variable "internalstress", which gives the internal stress tensor
* use "math_invert3x3" instead of "math_inv3x3" for inversion of Fe
* for dislocation stress calculation: first regular case, then special case of dead dislocations in central ip
* "dv_dtau" now given for each dislocation type, so is a (ns,4) array
* deleted unused variables in "_LpAndItsTangent"
* corrected contribution of deads in "_LpAndItsTangent"
* the NaN variables defined in math did not give a proper NaN value, so use 0.0/0.0 again
* neighbors with nonlocal constitution but local properties (i.e. /nonlocal/ flag not set) are also considered for incoming fluxes
2011-09-07 11:30:28 +00:00
Martin Diehl 380a536b45 homogenization_*, constitutive_*, DAMASK_spectral_interface: did some polishing regarding init output
makefile: corrected spelling mistake
2011-08-26 13:57:29 +00:00
Christoph Kords b300cc7faa ip volume is now based on the determinant of F. "mesh_ipVolume" represents the initial volume and is multiplied with det(F) wherever the current volume is needed. Since this works for all solver types, the "volume" output in crystallite is now also correct for spectral method and abaqus. 2011-08-19 11:18:56 +00:00
Christoph Kords 6f859e99de * internal stress calculation now considers dead dislocations always at the interface, not at the center of the IP volume; used to merge them together with "normal" dislocations for stress calculation.
* dislocation flux is blocked if we encounter a sign change in the resolved shear stress from the central ip to the neighbor
* do not set density to zero if below certain threshold; this creates an artificial sink term
2011-08-02 11:17:45 +00:00
Martin Diehl 3adb7ab382 corrected makefile, now working again without giving standard values explicitly.
did some small modification in order to make it possible to compile with gfortran. Changed NaN=0.0/0.0 to bitwise representation (3 different ways)
2011-08-01 10:11:32 +00:00
Christoph Kords e39445ee7a dead dislocations now exert a backstress on their "home" MP 2011-05-26 09:35:42 +00:00
Christoph Kords cac45cff96 ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields
* Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced
* Abaqus: ip coordinates are directly updated, no update of node coordinates!
* Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 15:57:59 +00:00
Philip Eisenlohr e5a2d829b0 new substructure with 'include' and 'config' directories
renaming of mpie_... to DAMASK for main usersubroutines

extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 16:38:45 +00:00
Franz Roters 7d84a0911e removed unused variables 2011-04-13 14:16:22 +00:00
Franz Roters c1b8391110 changed enconding of all source files to UTF-8 without BOM (signature) Codepage 65001 2011-04-07 07:20:28 +00:00
Christoph Kords 4d0fefd231 security factor of 1.2 for CFL condition in constitutive_nonlocal_dotState 2011-04-06 11:47:24 +00:00
Christoph Kords 4ea1fe436b added check for CFL condition in constitutive_nonlocal_dotState 2011-04-06 09:07:36 +00:00
Franz Roters fcdb805225 added copyright text to all f90 (free) format files 2011-04-04 14:09:54 +00:00
Christoph Kords 790dbed1e4 * removed last remnants of old debugger
* replaced "dble" intrinsic function by "real" with pReal kind in constitutive_nonlocal.f90
* removed useless line breaks in output of state in CPFEM.f90
2011-04-04 08:34:52 +00:00
Christoph Kords c36968fc68 distance for periodic images in internal stress calculation was incorrect 2011-03-30 11:57:41 +00:00
Christoph Kords 314ca3fe7f Internal stress calculation in nonlocal model: instead of integration of excess gradients (->Bayley) we now sum up contributions from adjacent superdislocations within a certain radius R. When periodicity is used, also periodic images are considered in stress evaluation. 2011-03-29 07:34:33 +00:00
Christoph Kords 3d51dd36fa * Introduced preprocessor directives in order to suppress compilation of most write statements when using openmp. This tremendously improves efficiency of parallelization.
* Also added some more openmp directives to increase percentage of parallelized code.

* "implicit none" was missing in two subroutines of homogenization and constitutive.
2011-03-29 07:27:19 +00:00
Christoph Kords b8b75edd7d no changes to previous version, just wanted to add some comment to the previous commit:
subroutine "constitutive_nonlocal_dotState" only affects the current dotState, so no need to pass the whole array as argument
2011-03-21 15:23:36 +00:00
Christoph Kords 9b1e1e35ea dotState 2011-03-21 15:18:09 +00:00
Christoph Kords 11138e3ee2 debugging output is now controlled by the "verbosity" parameter in the debug.config ranging from 0 (=almost no output) to 8 (=very detailed output)
0 : only version infos and all from "hypela2"/"umat"
1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info
2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines
3 : basic outputs from "homogenization.f90"
4 : extensive outputs from "homogenization.f90"
5 : basic outputs from "crystallite.f90"
6 : extensive outputs from "crystallite.f90"
7 : basic outputs from the constitutive files 
8 : extensive outputs from the constitutive files

If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
2011-03-21 10:31:17 +00:00
Christoph Kords 235266b169 openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:

DON'T use implicit array subscripts:
example:    real, dimension(3,3) :: A,B
                  A(:,2) = B(:,1)               <--- DON'T USE
                  A(1:3,2) = B(1:3,1)       <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to  prevent memory leaks.

Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)

Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 10:46:17 +00:00
Christoph Kords ad4706673b * removed calculations for dipole formation/dissociation by stress change, since it is not used anyways; also removed associated constitutive outputs from material.config
* removed input variables in constitutive_collectDotState and constitutive_postResults that are not needed anymore (because of recent changes in constitutive_nonlocal)
2011-02-25 09:53:20 +00:00
Martin Diehl cd5407b08b removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used.
Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90.
For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 09:25:53 +00:00
Christoph Kords e022810e66 fixed problem in internal stress calculation for periodic neighborhood 2011-02-25 08:10:11 +00:00
Christoph Kords e49e5e13af * in flux calculation: take care of special case for single element model
* do not overwrite "constitutive_nonlocal_rhoDotFlux" when doing a state perturbation, so we can use it for output
2011-02-24 10:01:41 +00:00
Christoph Kords 96d3682d5e * new global integer variable "numerics_integrationMode" (1 indicating integration of central solution, 2 indicating integration of perturbed state)
* combined "integrator" and "integratorStiffness" in new global variable "numerics_integrator"
2011-02-23 08:29:51 +00:00
Christoph Kords d835380bc0 * "constitutive_nonlocal_flux" is set to zero in "constitutive_nonlocal_dotState", not in "constitutive_nonlocal_microstructure"
* dislocation flux and internal stress calculation now consistent with new definition of slip system lattice according to paper (polarity of screws inverted)
2011-02-23 08:08:06 +00:00
Christoph Kords b21c153761 restructured constitutive_nonlocal_compatibility and incorporated the "surfaceTransmissivity" in the compatibility calculation 2011-02-16 16:38:18 +00:00
Christoph Kords 24d33bf2ff * added a new material parameter "surfaceTransmissivity" (default value 1.0) which allows to change the transmissivity of the material surface between 0 and 1
* now complaining when encountering an unknown nonlocal parameter in material.config
* use same error ID for all material parameters out of bounds
* symmetric flux calculation in side dotState can now be omitted (because of new treatment of periodicity)
* switching back to "local flux balance" (add leaving and entering fluxes at central MP, don't touch neighbor) instead of "flux distribution" (subtract leaving fluxes from central MP and add them at neighboring MP). This has the advantage that there is almost no need for CRITICAL statements in parallelization, so hopefully this results in some speed up.
2011-02-16 16:35:38 +00:00
Philip Eisenlohr 171f5375f1 shearrate output now with sign (no |abs| as before) 2011-02-11 10:19:41 +00:00
Christoph Kords 803e1a8c05 In order to help preventing further memory leaks all array sections now have an explicit instead of assumed shape, e.g. Fe(1:3,1:3) instead of Fe(:,:). 2011-02-09 13:12:46 +00:00
Christoph Kords 921967c2ba * found memory leak in nonlocal model! "constitutive_nonlocal_rhoDotFlux" has to have upper index bound of 10 for second dimension, not 8.
* need to recalculate dislocation velocity in postResults, otherwise we take values of last perturbed state! So the following outputs were up to now showing the perturbed state: shearrate, dislocation velocity, all density rates!
2011-02-09 08:28:47 +00:00
Christoph Kords 17a6c0e59b enhanced comment on dislocation kinetics 2011-02-08 12:48:50 +00:00
Christoph Kords faba13f7fd * now able to introduce some scatter in the initial single dislocation density (only for nonlocal model!) ; setting the parameter "rhoSglScatter" to a positive value generates a gauss distribution for the dislocation density with standard deviation equal to "rhoSglScatter"
* dislocation stress calculation is only done for nonlocal constitution ("/nonlocal/" keyword is present in material.config)
2011-02-04 15:41:32 +00:00
Christoph Kords b72d75ed05 corrected indices in flux density output 2011-01-28 12:49:58 +00:00
Christoph Kords 05d4d5fef2 * kinetics now according to Mohles; enables solid solution hardening
* changed example in material.config accordingly
2011-01-26 10:17:42 +00:00
Christoph Kords 062c6b3d54 * allow zero cutoff radius
* added missing error codes
2011-01-12 12:36:48 +00:00
Christoph Kords d92f992eb7 if nonlocal ip has local neighbor assume perfect transparency of the (perhaps virtual) phase boundary. this is only a quick fix! need to rethink the way constitutive and real boundaries are treated! 2011-01-11 18:00:29 +00:00
Christoph Kords 6a3dd78259 fluxes are disabled when keyword "/nonlocal/" is omitted in the material.config (this is a way to use the constitutive_nonlocal model as a local dislocation based model) 2011-01-11 14:55:36 +00:00
Christoph Kords 405d5529e7 * checked and corrected parallelization of code. compiles now successfully, but simply aborts computation with first parallel directive without any comment :-(((
* also put a call to constitutive_microstructure at the start of each crystallite_integration subroutine like it was before. need that for nonlocal model in case of crystallite cutback
2010-11-03 17:22:48 +00:00
Christoph Kords 4439282239 no change to previous version, just forget to mention one important change of the last revision:
* fluxes are now again calculated and distributed only! by the originating material point. this means that the central MP might change the dotState of its neighbor. have to see whether locks slow down parallel computation
2010-10-26 13:49:58 +00:00
Christoph Kords 62d06001ea * corrected compatibility for screws (always positive)
* detection of grain boundary in constitutive_nonlocal_microstructure with the help of transmissivity
* enforce positive densities in constitutive_nonlocal_microstructure (needed because dotState does not create cutbacks for negative densities anymore)
* reset single mobile densities below certain threshold to zero (also done in constitutive_nonlocal_microstructure)
* constitutive_nonlocal_kinetics only gets local state variable as input, no need for the entire array here
* dv_dtau is always positive
* multiplication is only active when there is already some initial density of the respective type
2010-10-26 13:42:18 +00:00