85b0861893
adjusted test to new solver
2012-11-28 14:55:36 +00:00
07bec16268
corrected compilation exception for gfortran in case of compilername!=F90
2012-11-28 13:54:02 +00:00
1e6cc1ed62
added new example file with 64^3 res, updated old to have consistent microstructure
2012-11-28 13:31:14 +00:00
29618df550
annihilate only part of the screw dipoles (specified by minimumDipoleHeight), not all; moved annihilation of screws from deltaState back to dotState
2012-11-28 12:09:48 +00:00
a815d85f1f
adopted to new solver
2012-11-28 10:16:26 +00:00
e10000a338
Introduced an alternative cutback scheme for the nonlocal model, that allows to keep the results of most of the ips that immediately converged, and only do cutbacks in regions where some ips are in big trouble. Only works for nonlocal model and state integrator 2.
2012-11-27 18:36:55 +00:00
05507a6240
removed opening of unused _tmp file
2012-11-27 17:59:56 +00:00
f824445089
now doing state integration test with new basic solver
2012-11-27 17:25:26 +00:00
e45e1316ba
removed auto detection of compilername, it only works if the file you're looking for (in our case "ifort") is in the same directory as the Makefile
2012-11-27 17:22:03 +00:00
b63044e45e
2012-11-27 17:16:38 +00:00
ded797baa6
...and added new test for loadcase parsing
2012-11-27 16:53:59 +00:00
8b9d499fd4
adopted to new basic solver
2012-11-27 16:51:26 +00:00
bc9ff059d0
corrected wrong filename
2012-11-27 16:29:37 +00:00
255af58434
post processing script to add eigenvalues and eigenvectors to tensorial data in ASCII tables.
2012-11-23 21:49:30 +00:00
526e08bd02
2012-11-23 17:34:03 +00:00
4bdc56391d
updated restart test to use the new table comparison facilities and check the new basic solver (part 2)
2012-11-23 17:28:16 +00:00
549ea3c1e6
updated restart test to use the new table comparison facilities and check the new basic solver (part 1, there is some problem with renaming)
2012-11-23 17:21:18 +00:00
1e32eb560e
corrected buggy calculation of Schmid matrix for twins introduced in rev1809.
...
(stress acting on twin systems was overestimated by factor of sqrt(3) due to that!!)
additional polishing.
2012-11-23 17:02:50 +00:00
11ed7fab86
corrected bug in curl calculation causing the output of transposed tensor (according to information stored in testing/9102/proof/Curl of Tensor - Physics Forums.pdf)
...
addCurl test is now done against analytical solution and working, added it to list of automated tests.
small improvements on test.py
2012-11-23 15:16:51 +00:00
4ebc8d6834
now comparing test results against analytic solution with different accuracy for the different schemes
2012-11-23 09:18:42 +00:00
0f962698f4
Added report of SUCCESSFUL test for Revision 1948
2012-11-23 02:45:56 +00:00
e584c0e6e8
deleted space in front of preprocessor line
2012-11-22 20:04:33 +00:00
565713fecb
improve functionality to compare ASCII tables
2012-11-22 18:01:51 +00:00
dbc26e5f25
corrected auto detection of ifort compiler
2012-11-22 13:17:54 +00:00
38ec462f4a
order of integration now same for all state integrators: first calculate the dotState and then the deltaState
2012-11-22 13:04:19 +00:00
7d196fbb25
polishing
2012-11-22 09:58:36 +00:00
e0e5683386
Added report of SUCCESSFUL test for Revision 1942
2012-11-22 02:31:00 +00:00
23a0ca3b59
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0
...
serial calc now skips IPs when /elementhomogeneous/
for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 17:00:29 +00:00
ec8a84ded7
added output of element and ip to debug messages
2012-11-21 16:58:14 +00:00
d189a6a7a0
polishing
2012-11-21 16:57:57 +00:00
81a96d722c
added state integration comparison to automated tests
2012-11-21 15:40:44 +00:00
6f488ffa4a
polished, filtered out component 5 of P (should be zero) and increased deformation.
...
less than 5% difference in stress results when using adaptive Euler at a strain of 10%, for other integration schemes error is much smaller
2012-11-21 15:39:27 +00:00
a40b73dc72
for array comparison, only values are taken into consideration that are non zero in array 1 AND array 2
2012-11-21 15:37:59 +00:00
5a723f3f49
introduced test to compare results of different state integrators
2012-11-21 15:05:29 +00:00
78c22d8449
corrected label in case of divergence of tensor, now using correct notation for scalar: divFFT(data) instead of 1_divFFT(data)
2012-11-21 10:31:52 +00:00
547b8bbf02
Added report of SUCCESSFUL test for Revision 1933
2012-11-21 04:26:52 +00:00
b5945ced5e
changed counting of rows from pythonic (starting at 0) to human way (starting at 1)
2012-11-20 10:27:09 +00:00
6cea8a33b4
Added report of SUCCESSFUL test for Revision 1931
2012-11-20 03:24:14 +00:00
760af1fbbf
crystallite_requested now masked by execIP, now elemhomogeneous works again
2012-11-19 15:13:48 +00:00
d4a59541ad
removed write statements which were introduced for "debuging"
2012-11-19 15:12:11 +00:00
9fb94cd707
breaking crystallite loop in case of terminally ill (this functionality was probably lost since rev1886)
2012-11-19 08:39:48 +00:00
4195d53d11
message of last commit was incomplete: moved annihilation of screw dipoles from dotstate to deltaState, since it is not a rate
2012-11-17 13:54:22 +00:00
467c186f0f
annihilation of screws
2012-11-17 13:50:20 +00:00
dc5cd8a4c4
A modified twin-twin interaction matrix for BCC is introduced.
...
An introduction of a third parameter at the interactionTwinTwin in the material.config for BCC-dislotwin materials is essential.
2012-11-16 13:39:08 +00:00
9c489149b5
Added report of SUCCESSFUL test for Revision 1924
2012-11-16 02:06:54 +00:00
6101a9bb17
seems to be a windows lnk containing particular directory info of Claudio...
2012-11-15 22:49:29 +00:00
d9a98417ca
switched element library to geomType based.
...
saves to copy same geometry description for different elements that are essentially similar regarding the IP number but differ in total node count.
introduced quadratic tetrahedron (Marc element 127 -- element 157 might also work, but did not perform well in fully elastic calc so far)
2012-11-15 22:45:20 +00:00
36b890fba3
comment added
2012-11-15 15:55:15 +00:00
5892732672
Testing of J2 Plasticity by Comparing the results of the simualtion on Marc with analytical results based on constitutive equations
2012-11-15 15:40:32 +00:00
aec163941d
calculate ip coordinates only once when the first ip enters calculation mode
2012-11-15 12:31:39 +00:00
Martin Diehl