Commit Graph

275 Commits

Author SHA1 Message Date
Christoph Kords a5c1624648 check for invalid mesh type once in constitutive_init and not every time constitutive_nonlocal_dotState is called 2012-05-18 13:15:23 +00:00
Christoph Kords f6d5efeed3 removed arguments Fe and Fp from collectDeltaState function call 2012-05-17 11:04:22 +00:00
Christoph Kords a54439e3b5 dotState does not have to be reset to zero. this is a remnant from older versions when the dotState for the nonlocal model used to be updated by the neighboring integration point 2012-05-16 15:35:14 +00:00
Christoph Kords 84d4652a07 all constitutive modules now contain a new function "deltaState", which in the future allows to have an instantaneous and incremental change of the state (additional to the rate based evolution with dotState). 2012-05-16 14:43:26 +00:00
Franz Roters eb8265b914 fixed potential division by zero error discovered by our American friends 2012-05-08 07:16:00 +00:00
Christoph Kords 5263366615 adding switch in material.config for short range stress correction 2012-03-15 14:58:12 +00:00
Christoph Kords 7330031579 corrected special treatment of periodic images in calculation of stress correction 2012-03-15 10:08:08 +00:00
Franz Roters 70a44fbbdd constitutive models need to skip new keyword elasticity when reading their arameters 2012-03-15 09:22:24 +00:00
Christoph Kords 9cbbb7cab5 Dead dislocations are treated the same as mobile dislocations for the flux part though they do not contribute to slip. By that the pileup of dead dislocations is able to diminish with time (kinetics are the same as for the glide part; this is not correct but gives valuable results). Also remobilization of dead dislocations at neighbor is taken into account for flux. 2012-03-14 15:32:50 +00:00
Christoph Kords 6bca2150f2 local stress correction of gradient in dead dislocations and neighboring excess density is additive 2012-03-14 15:24:19 +00:00
Christoph Kords 06c93435f2 viscosity term in kinetics law proportional to resolvedstress minus forest term 2012-03-14 15:18:36 +00:00
Christoph Kords d2652cae47 multiplication only controlled by screws 2012-03-13 14:19:36 +00:00
Franz Roters c9ed989dad replaced keyword constitution with plasticity in preparation of upcomming generalized elasticity 2012-03-12 14:09:37 +00:00
Martin Diehl bd9667bd4b added new, flexible debugging scheme.
now all modules have their own debug specification.
compiles and runs, I hope nothing is broken
did a lot of polishing
2012-03-08 20:25:28 +00:00
Martin Diehl 478a6d110c mixed things up, did not want to commit constitutive_nonlocal.f90 but rather DAMASK_spectral.f90!!!!
did a lot of polishing on constitutive_nonlocal.f90 (mostly checked in at last commit), for changes on DAMASK_spectral.f90 see previous message
2012-02-23 17:20:57 +00:00
Martin Diehl a98832100f introduced itmin parameter for spectral code for defining minimum number of cycles
removed simplified_algorthim flag because the basic scheme using the polarization field will not be implemented
introduced divergence_correction flag for making divergence criterion resolution-independent (still experimental and not set by default)
corrected output and restart frequency (now modulo on incs of current load case)
2012-02-23 16:43:17 +00:00
Christoph Kords 9bf5b9dc86 dotState=NaN enforces cutback, if evolution rates lead to negative densities 2012-02-22 16:08:22 +00:00
Christoph Kords 97b2240fe9 take absolute dislocation velocities when testing Courant-Friedrichs-Lewy condition 2012-02-21 13:11:47 +00:00
Nan Jia db06c797cd store number of outputs for each instance of the constitution in constitutive_[j2/titanmod/...]_Nouput and use this value to loop over all valid outputs when determining the size of the outputs array 2012-02-14 15:19:59 +00:00
Christoph Kords 30c55c3142 added check for unknown keywords again (in agreement with Philip ;-)
indeed 'constitution' and '/nonlocal/' are the only keywords which have to be ignored, since they are parsed elsewhere
2012-02-14 09:22:37 +00:00
Philip Eisenlohr 9b73cb3c65 removed parameter check complaining about unknown keyword as default case. there are just too many keywords that do not trigger a variable assignment to cope with them (e.g. /nonlocal/, constitution, etc.)
I suggest to kill similar logic from other files if present somewhere...
2012-02-13 23:30:59 +00:00
Christoph Kords c786336af3 reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore.
all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 17:41:27 +00:00
Martin Diehl 156ec4582a polishing, adding _pInt etc. where applicable
post_results now handels zero increment different (like FEM, it is always there even if it is not counted)
2012-02-13 14:18:07 +00:00
Christoph Kords 26b4f886ba whoops, accidentally removed _pInt in the IO_error calls which where previously added by Martin 2012-02-10 07:58:33 +00:00
Christoph Kords ff53b9754b somewhat better readable format without as much linebreaks 2012-02-10 07:50:29 +00:00
Martin Diehl 7a23833a39 removed line>132 characters, added _pInt when calling IO_error 2012-02-09 17:28:55 +00:00
Christoph Kords d62eddc0cd corrected kinetics law and changed parameters. For solid solution hardening there are 3 parameters: the activation energy, the concentration of obstacles that determines the activation length and meanfreepath, and the obstacle size that determines the activation volume. For the Peierls mechanism there is: the width of doublekinks that determines the activation volume and the Peierls stress for edge and screw.
Still testing needed to check whether the current formulation makes sense or not.
2012-02-03 12:50:54 +00:00
Martin Diehl c5128e94eb some f2008 standard related correction i didn't check in last time 2012-02-01 20:20:05 +00:00
Martin Diehl 800e291240 made code standard conform to Fortran 2008 (ignoring warning concerning comments beyond character 132). Basically, changing "x" format specifier to "Nx" ("1x") plus removing $ format specifier
added compiler switches for gfortran and ifort to check for standard conformity
old gnu compilers <4.4 are not longer supported because they don't provide the c binding for fftw
2012-01-31 19:18:55 +00:00
Martin Diehl 80583fefb5 added compilation_info.f90, to store compilation date,time and compiler info in each file
added #include statement at each init() routine
2012-01-31 14:54:49 +00:00
Martin Diehl eeda357710 N^2 initialization loop (former spectralPictureMode) rewritten in material.f90
additional output in DAMASK_spectral_interface.f90 
132 character cut off in constitutive_nonlocal.f90
rounding error in math.f90 complex number initialization (1.0_pReal)*2.0_pReal*pi
new $DAMASK_NUM_THREADS warning in numerics.f90 / IO.f90
polishing in DAMASK_spectral.f90
2012-01-30 13:52:41 +00:00
Christoph Kords 1330576a01 added new math function "math_deviatoric33" which returns the deviatoric part of a 3x3 tensor
renamed some math functions, so that we have a universal naming scheme: for matrix multiplications use an "x" (e.g. math_mul33x3); don't use the "x" to describe the shape of the tensor that the function is applied to (e.g. math_invert33 instead of math_invert3x3)
2012-01-26 13:50:00 +00:00
Christoph Kords df931890e0 corrected typos 2012-01-26 12:50:04 +00:00
Christoph Kords 5a658d1b82 dislocation velocity output for each dislocation type (edge+,edge-,screw+,screw-)
for fcc constitutive_nonlocal_kinetics is called only once and the result is used for each dislocation type, for all other lattice structures we have one call for each dislocation type
2012-01-26 07:43:36 +00:00
Christoph Kords e5407894b5 Reworked kinetics. Now there is a universal law which can be used for both fcc and bcc (and probably even hcp). It mainly consists of an athermal forest cutting part , solid solution and peierls as thermally activated processes, and viscous glide. Therefore, lots of new parameters in the material.config. Not sure yet if the values make sense though.
Also renamed some of the old parameters. 

Unknown constitutive output raises error.
2012-01-25 17:04:37 +00:00
Christoph Kords 8739b9522e dislocation stress does not add to stress field anymore, but is only available as constitutive output for purposes of postprocessing. instead, we now use a backstress term (which is added to the resolved shear stress) that depends on the gradient of excess density on the same slip system. 2012-01-17 10:26:57 +00:00
Christoph Kords 860594d9a4 forgot to multiply shearrate with timestep in order to get accumulated shear 2011-11-09 10:26:00 +00:00
Christoph Kords 6dc8a4d530 check for LFC only if there is any slip activity at all; also increased safety factor from 1.2 to 1.5 2011-11-09 09:55:39 +00:00
Christoph Kords 7033e84fc7 new outputs "accumulatedshear", "velocity_edge", and "velocity_screw" (the latter two replace the output "dislocationvelocity") 2011-11-09 09:22:52 +00:00
Christoph Kords 8bc39fcd48 immobile density output keeps its sign 2011-11-07 15:46:40 +00:00
Christoph Kords 34adec74e8 corrected wrong indices into state array for velocity 2011-11-07 15:17:58 +00:00
Christoph Kords 7dfb96a3da constitutive_nonlocal:
dislocation velocities are stored in the state, so we actually now have three "parts" of the state, the basic states that are updated by "constitutive_dotState" come first, then the dependent states that are calculated by "constitutive_microstructure" follow, and finally we have a last part reserved for other variables that just use the memory reserved by the state array and are updated somewhere else.

constitutive:

LpAndItsTangent does not need the full state, but only the local state, so changed that at least for the nonlocal constitutive law
2011-11-04 13:12:17 +00:00
Martin Diehl 8ac1891b3c moved DAMASK_NaN to prec.f90 respectively prec_single.f90 as it is precision dependent 2011-10-20 16:46:11 +00:00
Christoph Kords 7be2701989 * new output variable "internalstress", which gives the internal stress tensor
* use "math_invert3x3" instead of "math_inv3x3" for inversion of Fe
* for dislocation stress calculation: first regular case, then special case of dead dislocations in central ip
* "dv_dtau" now given for each dislocation type, so is a (ns,4) array
* deleted unused variables in "_LpAndItsTangent"
* corrected contribution of deads in "_LpAndItsTangent"
* the NaN variables defined in math did not give a proper NaN value, so use 0.0/0.0 again
* neighbors with nonlocal constitution but local properties (i.e. /nonlocal/ flag not set) are also considered for incoming fluxes
2011-09-07 11:30:28 +00:00
Martin Diehl 380a536b45 homogenization_*, constitutive_*, DAMASK_spectral_interface: did some polishing regarding init output
makefile: corrected spelling mistake
2011-08-26 13:57:29 +00:00
Christoph Kords b300cc7faa ip volume is now based on the determinant of F. "mesh_ipVolume" represents the initial volume and is multiplied with det(F) wherever the current volume is needed. Since this works for all solver types, the "volume" output in crystallite is now also correct for spectral method and abaqus. 2011-08-19 11:18:56 +00:00
Christoph Kords 6f859e99de * internal stress calculation now considers dead dislocations always at the interface, not at the center of the IP volume; used to merge them together with "normal" dislocations for stress calculation.
* dislocation flux is blocked if we encounter a sign change in the resolved shear stress from the central ip to the neighbor
* do not set density to zero if below certain threshold; this creates an artificial sink term
2011-08-02 11:17:45 +00:00
Martin Diehl 3adb7ab382 corrected makefile, now working again without giving standard values explicitly.
did some small modification in order to make it possible to compile with gfortran. Changed NaN=0.0/0.0 to bitwise representation (3 different ways)
2011-08-01 10:11:32 +00:00
Christoph Kords e39445ee7a dead dislocations now exert a backstress on their "home" MP 2011-05-26 09:35:42 +00:00
Christoph Kords cac45cff96 ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields
* Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced
* Abaqus: ip coordinates are directly updated, no update of node coordinates!
* Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 15:57:59 +00:00
Philip Eisenlohr e5a2d829b0 new substructure with 'include' and 'config' directories
renaming of mpie_... to DAMASK for main usersubroutines

extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 16:38:45 +00:00
Franz Roters 7d84a0911e removed unused variables 2011-04-13 14:16:22 +00:00
Franz Roters c1b8391110 changed enconding of all source files to UTF-8 without BOM (signature) Codepage 65001 2011-04-07 07:20:28 +00:00
Christoph Kords 4d0fefd231 security factor of 1.2 for CFL condition in constitutive_nonlocal_dotState 2011-04-06 11:47:24 +00:00
Christoph Kords 4ea1fe436b added check for CFL condition in constitutive_nonlocal_dotState 2011-04-06 09:07:36 +00:00
Franz Roters fcdb805225 added copyright text to all f90 (free) format files 2011-04-04 14:09:54 +00:00
Christoph Kords 790dbed1e4 * removed last remnants of old debugger
* replaced "dble" intrinsic function by "real" with pReal kind in constitutive_nonlocal.f90
* removed useless line breaks in output of state in CPFEM.f90
2011-04-04 08:34:52 +00:00
Christoph Kords c36968fc68 distance for periodic images in internal stress calculation was incorrect 2011-03-30 11:57:41 +00:00
Christoph Kords 314ca3fe7f Internal stress calculation in nonlocal model: instead of integration of excess gradients (->Bayley) we now sum up contributions from adjacent superdislocations within a certain radius R. When periodicity is used, also periodic images are considered in stress evaluation. 2011-03-29 07:34:33 +00:00
Christoph Kords 3d51dd36fa * Introduced preprocessor directives in order to suppress compilation of most write statements when using openmp. This tremendously improves efficiency of parallelization.
* Also added some more openmp directives to increase percentage of parallelized code.

* "implicit none" was missing in two subroutines of homogenization and constitutive.
2011-03-29 07:27:19 +00:00
Christoph Kords b8b75edd7d no changes to previous version, just wanted to add some comment to the previous commit:
subroutine "constitutive_nonlocal_dotState" only affects the current dotState, so no need to pass the whole array as argument
2011-03-21 15:23:36 +00:00
Christoph Kords 9b1e1e35ea dotState 2011-03-21 15:18:09 +00:00
Christoph Kords 11138e3ee2 debugging output is now controlled by the "verbosity" parameter in the debug.config ranging from 0 (=almost no output) to 8 (=very detailed output)
0 : only version infos and all from "hypela2"/"umat"
1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info
2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines
3 : basic outputs from "homogenization.f90"
4 : extensive outputs from "homogenization.f90"
5 : basic outputs from "crystallite.f90"
6 : extensive outputs from "crystallite.f90"
7 : basic outputs from the constitutive files 
8 : extensive outputs from the constitutive files

If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
2011-03-21 10:31:17 +00:00
Christoph Kords 235266b169 openmp parallelization working again (at least for j2 and nonlocal constitutive model).
In order to keep it like that, please follow these simple rules:

DON'T use implicit array subscripts:
example:    real, dimension(3,3) :: A,B
                  A(:,2) = B(:,1)               <--- DON'T USE
                  A(1:3,2) = B(1:3,1)       <--- BETTER USE
In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to  prevent memory leaks.

Enclose all write statements with the following:
!$OMP CRITICAL (write2out)
<your write statement>
!$OMP END CRITICAL (write2out)

Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 10:46:17 +00:00
Christoph Kords ad4706673b * removed calculations for dipole formation/dissociation by stress change, since it is not used anyways; also removed associated constitutive outputs from material.config
* removed input variables in constitutive_collectDotState and constitutive_postResults that are not needed anymore (because of recent changes in constitutive_nonlocal)
2011-02-25 09:53:20 +00:00
Martin Diehl cd5407b08b removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used.
Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90.
For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 09:25:53 +00:00
Christoph Kords e022810e66 fixed problem in internal stress calculation for periodic neighborhood 2011-02-25 08:10:11 +00:00
Christoph Kords e49e5e13af * in flux calculation: take care of special case for single element model
* do not overwrite "constitutive_nonlocal_rhoDotFlux" when doing a state perturbation, so we can use it for output
2011-02-24 10:01:41 +00:00
Christoph Kords 96d3682d5e * new global integer variable "numerics_integrationMode" (1 indicating integration of central solution, 2 indicating integration of perturbed state)
* combined "integrator" and "integratorStiffness" in new global variable "numerics_integrator"
2011-02-23 08:29:51 +00:00
Christoph Kords d835380bc0 * "constitutive_nonlocal_flux" is set to zero in "constitutive_nonlocal_dotState", not in "constitutive_nonlocal_microstructure"
* dislocation flux and internal stress calculation now consistent with new definition of slip system lattice according to paper (polarity of screws inverted)
2011-02-23 08:08:06 +00:00
Christoph Kords b21c153761 restructured constitutive_nonlocal_compatibility and incorporated the "surfaceTransmissivity" in the compatibility calculation 2011-02-16 16:38:18 +00:00
Christoph Kords 24d33bf2ff * added a new material parameter "surfaceTransmissivity" (default value 1.0) which allows to change the transmissivity of the material surface between 0 and 1
* now complaining when encountering an unknown nonlocal parameter in material.config
* use same error ID for all material parameters out of bounds
* symmetric flux calculation in side dotState can now be omitted (because of new treatment of periodicity)
* switching back to "local flux balance" (add leaving and entering fluxes at central MP, don't touch neighbor) instead of "flux distribution" (subtract leaving fluxes from central MP and add them at neighboring MP). This has the advantage that there is almost no need for CRITICAL statements in parallelization, so hopefully this results in some speed up.
2011-02-16 16:35:38 +00:00
Philip Eisenlohr 171f5375f1 shearrate output now with sign (no |abs| as before) 2011-02-11 10:19:41 +00:00
Christoph Kords 803e1a8c05 In order to help preventing further memory leaks all array sections now have an explicit instead of assumed shape, e.g. Fe(1:3,1:3) instead of Fe(:,:). 2011-02-09 13:12:46 +00:00
Christoph Kords 921967c2ba * found memory leak in nonlocal model! "constitutive_nonlocal_rhoDotFlux" has to have upper index bound of 10 for second dimension, not 8.
* need to recalculate dislocation velocity in postResults, otherwise we take values of last perturbed state! So the following outputs were up to now showing the perturbed state: shearrate, dislocation velocity, all density rates!
2011-02-09 08:28:47 +00:00
Christoph Kords 17a6c0e59b enhanced comment on dislocation kinetics 2011-02-08 12:48:50 +00:00
Christoph Kords faba13f7fd * now able to introduce some scatter in the initial single dislocation density (only for nonlocal model!) ; setting the parameter "rhoSglScatter" to a positive value generates a gauss distribution for the dislocation density with standard deviation equal to "rhoSglScatter"
* dislocation stress calculation is only done for nonlocal constitution ("/nonlocal/" keyword is present in material.config)
2011-02-04 15:41:32 +00:00
Christoph Kords b72d75ed05 corrected indices in flux density output 2011-01-28 12:49:58 +00:00
Christoph Kords 05d4d5fef2 * kinetics now according to Mohles; enables solid solution hardening
* changed example in material.config accordingly
2011-01-26 10:17:42 +00:00
Christoph Kords 062c6b3d54 * allow zero cutoff radius
* added missing error codes
2011-01-12 12:36:48 +00:00
Christoph Kords d92f992eb7 if nonlocal ip has local neighbor assume perfect transparency of the (perhaps virtual) phase boundary. this is only a quick fix! need to rethink the way constitutive and real boundaries are treated! 2011-01-11 18:00:29 +00:00
Christoph Kords 6a3dd78259 fluxes are disabled when keyword "/nonlocal/" is omitted in the material.config (this is a way to use the constitutive_nonlocal model as a local dislocation based model) 2011-01-11 14:55:36 +00:00
Christoph Kords 405d5529e7 * checked and corrected parallelization of code. compiles now successfully, but simply aborts computation with first parallel directive without any comment :-(((
* also put a call to constitutive_microstructure at the start of each crystallite_integration subroutine like it was before. need that for nonlocal model in case of crystallite cutback
2010-11-03 17:22:48 +00:00
Christoph Kords 4439282239 no change to previous version, just forget to mention one important change of the last revision:
* fluxes are now again calculated and distributed only! by the originating material point. this means that the central MP might change the dotState of its neighbor. have to see whether locks slow down parallel computation
2010-10-26 13:49:58 +00:00
Christoph Kords 62d06001ea * corrected compatibility for screws (always positive)
* detection of grain boundary in constitutive_nonlocal_microstructure with the help of transmissivity
* enforce positive densities in constitutive_nonlocal_microstructure (needed because dotState does not create cutbacks for negative densities anymore)
* reset single mobile densities below certain threshold to zero (also done in constitutive_nonlocal_microstructure)
* constitutive_nonlocal_kinetics only gets local state variable as input, no need for the entire array here
* dv_dtau is always positive
* multiplication is only active when there is already some initial density of the respective type
2010-10-26 13:42:18 +00:00
Christoph Kords 366d52bd71 * former "relevantRho" and "relevantResistance" is renamed to "atol_rho" and "atol_resistance" and now used as an absolute tolerance for the state residuum. before it was used rather as significant state, so whenever the state dropped below that value it was considered converged. (In dislotwin and titanmod constitutive law there is only one value atol_rho which is used for all the states, though the state array consists not only of densities. We need further parameters here!)
* somewhat simplified convergence check for adaptive euler and runge-kutta
2010-10-26 13:16:37 +00:00
Christoph Kords fffe731447 * had to correct nonlocal slip system compatibility and flux calculation. last update gave wrong results. 2010-10-15 13:19:26 +00:00
Christoph Kords 724960686f * in nonlocal model: dislocation flux now with valid description also for large angle grain boundaries; transfer of dislocations from one slip system to the other according to new variable "constitutive_nonlocal_compatibility" which depends on the angle between slip plane normals and slip directions and is updated once per cycle in function "crystallite_orientations"
* reactivated debugging functionality for "non-standard" integration methods
2010-10-12 13:08:54 +00:00
Christoph Kords fce7590c17 * now able to choose method for state integration (integrator and integratorStiffness in numerics.config); standard is "Fixed Point Iteration", which is basically the same as before; others available are "Explicit Euler", "AdaptiveEuler", "Classical Runge-Kutta" and "Runge-Kutta Cash-Karp"
* now remembering stiffness similar to how we do it for Lp etc.; avoids undefined stiffness values for nonconverged stiffness calculation

* non-local stuff:
   * changed non-local kinetics (Gilman2002)
   * enforce zero shearrate for overall carrrier density below relevant density
   * enforce zero density for those states that become negative and were below relevant density before
   * dislocation velocity is not limited by V^(1/3) / dt anymore
2010-10-01 12:18:49 +00:00
Philip Eisenlohr da53656c9a added C3D20R (type 9) to list of possible non-local elements (Christoph, should we invent a reasonable error number for this? "-1" may not be optimal...) 2010-08-19 23:00:26 +00:00
Philip Eisenlohr 298cecbfec corrected syntax errors (long lines, line continuation by \) and logical mistake in mpie_cpfem_marc / abq_std which went unnoticed in ifort. Using SunStudio f90 surfaced those... 2010-08-03 23:47:00 +00:00
Christoph Kords eb0cc24a8e no need for material parameter "a" anymore, dislocation stress calculation now works without "core spreading" 2010-06-21 16:01:05 +00:00
Christoph Kords 7d6e52067b dislocation stress based on dislocation density gradients 2010-06-21 15:58:56 +00:00
Christoph Kords 740db98090 - use upwind differences scheme for fluxes instead of central differences
- introduced possibility to "reflect" fluxes at free surfaces in order to have quasi-periodic fluxes
2010-06-09 08:56:00 +00:00
Christoph Kords 71c6179ee5 dislocation stress had wrong sign in some components 2010-06-08 09:34:23 +00:00
Christoph Kords 3ce1882d29 when calculating dislocation stress at grain boundaries, densities are now extrapolated similarly to like it was already done at free surfaces 2010-06-07 16:01:37 +00:00
Christoph Kords 3989cc2688 dislocation stress now considers dislocation segments of length V^(1/3) and ensures non-singular solution for points that are collinear to the dislocation line by means of a core spreading parameter "a". stress is scaled by a reference cutoff radius "r" to avoid mesh-dependent stress values.
corrected formula for conversion of anisotropic elastic constants to isotropic Youngs modulus and poissons ratio
2010-06-07 14:32:23 +00:00
Christoph Kords 76b392e12f dislocation stress calculation in constitutive_nonlocal_microstructure: corrected mapping from lattice to slip system frame and the neighboring dislocation density formulation 2010-05-28 13:12:36 +00:00
Franz Roters bb73a74325 there was a line break missing so that it did not compile 2010-05-26 17:10:26 +00:00
Christoph Kords e5f0af638e fixed calculation of dislocation stress for elements with a single ip and no neighbors; used to get segmentation fault 2010-05-26 09:17:10 +00:00
Christoph Kords 0c5bc83469 in nonlocal_microstructure: at the model surface the excess density is now extrapolated from opposite neighbor instead of assuming zero density; this results in better modeling of the dislocation stress at the surface
restructured nonlocal_dotstate, to be able to easily switch on and off particular effects in the microstructure evolution
nonlocal_dotstate now enforces a cutback when single density runs the risk of becoming negative; in the case of a state already below the relevantState dotState is set to zero
introduced two new output variables: rho_dot_edge and rho_dot_screw
2010-05-21 08:51:15 +00:00
Christoph Kords 472684c30e make element type 8 (= hex8 reduced integration) available for nonlocal constitutive law 2010-05-18 08:13:23 +00:00
Denny Tjahjanto 9026cc4016 again corrections. but this version must work. 2010-03-24 16:23:21 +00:00
Denny Tjahjanto 40b1478dac the latest RGC model + corrections for "element homogeneous" feature 2010-03-24 13:20:12 +00:00
Christoph Kords f4e5d32cde added flag verboseDebugger to debug in order to have more control about debugging statements
set this to true if you want extended debugging info in the output file
2010-03-19 14:14:08 +00:00
Christoph Kords 948c119ee9 changed internal representation of orientation and misorientation from euler angles to quaternions (this should also fix some bugs in the math_misorientation subroutine). includes a couple of new functions in math.f90 and some changes in crystallite.f90.
beware that crystallite output "orientation" now by default returns the orientation as quaternion. if you want euler angles instead, you have to add "eulerangles"  as a crystallite output in your material.config file (see material.config template).

for input of orientations in the texture block of the material.config you still have to specify the rotation in terms of euler angles, quaternions are not yet supported for input.
2010-03-18 12:23:17 +00:00
Christoph Kords e3dd7551dc added output for dislocation evolution rate associated with flux: "rho_dot_flux" 2010-03-10 09:49:40 +00:00
Christoph Kords a0d28ebc18 - flux calculation is now also compatible to neighborhood of local constitution
- flux density interpolation now depends on the position of the interface between ttwo neighboring material points
- simplified flux calculation scheme
- introduced sanity check for dislocation velocity to ensure v*dt< cellsize
2010-03-04 17:14:47 +00:00
Christoph Kords 538faecf45 new output "dislocationvelocity" 2010-02-23 17:23:07 +00:00
Christoph Kords 97db70cf23 constitutive_nonlocal:
- reworked contribution of immobile dislocation density for rate equations
- flux is now calculated on the basis of interpolated velocities and densities at the interface; both incoming and outgoing fluxes are considered, so every material point only changes his own dotState
- dislocation velocity is now globally defined and calculated by subroutine constitutive_nonlocal_kinetics; the subroutine is called inside _LpAndItsTangent as well as _microstructure; therefore, microstructure now needs Tstar_v as additional input; in the future one should perhaps create a subroutine constitutive_kinetics that calls constitutive_nonlocal_kinetics separately, to clearly distinguish between microstructural and kinetic variables 
- better use flux density vector as output variable instead of scalar flux values for each interface
- added output variables internal and external resolved stress

crystallite:
- added flag to force local stiffness calculation in case of nonlocal model
- misorientation angle is explicitly set to zero when no neighbor can be found

debug:
- added flag "selectiveDebugger" that is used when debugging statements should only affect a specific element, ip and grain; these are specified with the new variables debug_e, debug_i and debug_g
- debugger can now be used in its original sense
2010-02-17 13:21:36 +00:00
Christoph Kords a2037db9c6 corrected sign of screw part of dislocation stress 2010-02-12 12:54:00 +00:00
Christoph Kords ed8446e0f3 - corrected contribution of immobile singles to dipole formation and annihilation rates
- remobilization of immobile singles immediately increases the mobile single dislocation density and therefore directly affects all other mechanisms in dotState
2010-01-06 09:54:00 +00:00
Christoph Kords dce840c0a5 - introduction of immobile (used) single dislocation densities as new state variables
- changed nomenclature (rho -> rhoSgl) to distinguish precisely between single dislocation density and total dislocation density
- changed material.config accordingly
2010-01-05 16:07:24 +00:00
Christoph Kords 1f7aebfa4d new subroutine crystallite_orientations: calculates the orientation matrix and the euler angles and - in case of single grain ips - the misorientation for each neighboring ip.
The calculation of the misorientation is now done once in crystallite init and at the end of every FE increment. This saves a lot of time compared to doing it in dotState for every crystallite subinc.
2009-12-18 15:46:33 +00:00
Christoph Kords d784153e0c constitutive_nonlocal:
- corrected flux term
- multiplication is now aware of dislocation type
- corrected change rate for "dipole size" dupper
- corrected term for dipole dissociation by stress change
- added transmissivity term in fluxes which accounts for misorientation between two neighboring grains (yet hardcoded transmissivity according to misorientation angle)
- added more output variables

constitutive:
-  2 additional variables "previousDotState" and "previousDotState2", which are used to store the previous and second previous dotState (used in crystallite for acceleration/stabilization of state integration)
- timer for dotState now measures the time for calls to constitutive_ collectState (used to reside in crystallite_updateState, which is not critical in terms of calculation time anymore) 

crystallite:
- convergence check for nonlocal elments is now done at end of crystallite loop, not at the beginning; we simple set all elements to not converged if there is at least one nonlocal element that did not converge
- need call to microstructure before first call to collect dotState for dependent states
- stiffness calculation (jacobian): if there are nonlocal elements, we also have to consider changes in our neighborhood's states; so for every perturbed component in a single ip, we have to loop over all elements; since this is extremely time-consuming, we just perturb one component per cycle, starting with the one that changes the most during regular time step.
- updateState gets a damping prefactor for our dotState that helps to improve convergence; prefactor is calculated according to change of dotState

IO:
- additional warning message for unknown crystal symmetry
2009-12-15 08:20:31 +00:00
Luc Hantcherli 67f87486b1 in constitutive_dislotwin.f90:
in constitutive_nonlocal.f90:

Derivatives of shear rates w.r.t. resolved shear stress HAVE to be positive.
Computation of dgdot_dtauslip is now correct.
2009-11-06 17:46:12 +00:00
Christoph Kords 9892fd9a10 sorry: initialization of periodicBC was erroneous 2009-10-20 16:38:05 +00:00
Christoph Kords c1ee34d235 constitutive_nonlocal:
- read in activation energy for dislocation glide from material.config
- changed naming of dDipMin/Max to dLower/dUpper
- added new outputs: rho_dot, rho_dot_dip, rho_dot_gen, rho_dot_sgl2dip, rho_dot_dip2sgl, rho_dot_ann_ath, rho_dot_ann_the, rho_dot_flux, d_upper_edge, d_upper_screw, d_upper_dot_edge, d_upper_dot_screw
- poisson's ratio is now calculated from elastic constants
- microstrucutre has state as first argument, since this is our output variable
- periodic boundary conditions are taken into account for fluxes and internal stresses. for the moment, flag has to be set in constitutive_nonlocal. 
- corrected calculation for dipole formation by glide
- added terms for dipole formation/annihilation by stress decrease/increase 

constitutive:
- passing of arguments is adapted for constitutive_nonlocal model

crystallite:
- in stiffness calculation: call to collect_dotState used wrong arguments
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults

homogenization:
- crystallite_postResults uses own Tstar_v and temperature, no need for passing them from materialpoint_postResults

IO:
- changed error message 229

material.config:
- changed example for nonlocal constitution according to constitutive_nonlocal

all:
- added some flush statements
2009-10-20 14:36:03 +00:00
Christoph Kords 9b3a59646a constitutive_nonlocal
- take orientation gradients into account when calculating dislocation stress and dislocation fluxes
- hard coded value for nu
- changed kinetics (parameter G0 is currently defined as a parameter, needs to be read from material.config)
- added some output statements

constitutive: 
- some functions and subroutines needed additional input variables for passing to constitutive_nonlocal 

crystallite:
- some functions and subroutines needed additional input variables for passing to constitutive
- call microstructure with current temperature, Fp, Fe, not "sub0" values
- show number of IPs, that are "onTrack" instead of those not "onTrack"
- calculate Fe at beginning of substep, since we need it for state preguess
2009-10-07 15:31:52 +00:00
Christoph Kords b09b2b17f3 convergence of state in crystallite is now tested as follows:
(state < relevant state) or (residuum < relative tolerance * state)
since the relevant value for the state variables depend on their nature and can vary by large scales (e.g. volume fraction: 1e-10, dislocation density: 1e5) it is not possible to set a unique value. instead the constitutive law has to decide what is relevant. therefore, all constitutive laws now read in parameters from the material.config that determine the values for relevantState [@luc: in dislobased law relevant State is for the moment generally set to 1e-200, so no additional parameters necessary in material.config. if you also want this feature, we can still implement it, no big deal]

- added sanity checks in constitutive_nonlocal.f90

- corrected coordinate transformation for backstress calculation in constitutive_nonlocal.f90

- corrected equations for evolution of dipole dislocation densities (athermal annihilation and formation by glide)
2009-09-18 15:37:14 +00:00
Franz Roters 2029b23f98 added version information to all files
do NOT edit text like this:
$Id: constitutive_phenopowerlaw.f90 406 2009-08-31 14:13:10Z MPIE\f.roters $
2009-08-31 15:09:15 +00:00
Christoph Kords f27d66a9ae constitutive_nonlocal:
- dipole dislocations with evolution

crystallite.f90:
- collect state uses subdt and subTstar0_v
- in nonlocal modus: set all crystallites to broken if one is not on track anymore after either stress integration or state update
- constitutive_microstructure is now called inside state update and not in integrate_stress anymore

material.config:
- new parameter for nonlocal constitution

CPFEM.f90:
- age Tstar after increment was finished
2009-08-28 13:50:47 +00:00
Christoph Kords 1dbd0865db constitutive_nonlocal.f90
- completed postResults output function
- connecting vector of neighboring material points is mapped to intermediate configuration of my neighbor

crystallite.f90
- zero out dotState only when crystallite is non-finished
- set nonfinished flag to false if crystallite is not on Track after state update
- in updateState: set onTrack flag to false if encounter NaN
- removed some old debugging outputs and added others

homogenization.f90
- in debugging mode now telling when a cutback happens
2009-08-24 08:16:01 +00:00
Christoph Kords 2aae7b7574 added dislocation multiplication to dotState in constitutive_nonlocal.f90
cleaned up debugging output statements to *.out file
2009-08-12 11:22:02 +00:00
Christoph Kords 8ed3ddc03b now with first draft of nonlocal constitutive law
debugging memory leak closed
debugging counters corrected

center of gravity stored in mesh

state updated is now split into a collecting loop and an execution

updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged

added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math

non-converged crystallite triggers materialpoint cutback (used to respond elastically)

non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 16:31:57 +00:00