549ea3c1e6
updated restart test to use the new table comparison facilities and check the new basic solver (part 1, there is some problem with renaming)
2012-11-23 17:21:18 +00:00
1e32eb560e
corrected buggy calculation of Schmid matrix for twins introduced in rev1809.
...
(stress acting on twin systems was overestimated by factor of sqrt(3) due to that!!)
additional polishing.
2012-11-23 17:02:50 +00:00
11ed7fab86
corrected bug in curl calculation causing the output of transposed tensor (according to information stored in testing/9102/proof/Curl of Tensor - Physics Forums.pdf)
...
addCurl test is now done against analytical solution and working, added it to list of automated tests.
small improvements on test.py
2012-11-23 15:16:51 +00:00
4ebc8d6834
now comparing test results against analytic solution with different accuracy for the different schemes
2012-11-23 09:18:42 +00:00
0f962698f4
Added report of SUCCESSFUL test for Revision 1948
2012-11-23 02:45:56 +00:00
e584c0e6e8
deleted space in front of preprocessor line
2012-11-22 20:04:33 +00:00
565713fecb
improve functionality to compare ASCII tables
2012-11-22 18:01:51 +00:00
dbc26e5f25
corrected auto detection of ifort compiler
2012-11-22 13:17:54 +00:00
38ec462f4a
order of integration now same for all state integrators: first calculate the dotState and then the deltaState
2012-11-22 13:04:19 +00:00
7d196fbb25
polishing
2012-11-22 09:58:36 +00:00
e0e5683386
Added report of SUCCESSFUL test for Revision 1942
2012-11-22 02:31:00 +00:00
23a0ca3b59
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0
...
serial calc now skips IPs when /elementhomogeneous/
for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 17:00:29 +00:00
ec8a84ded7
added output of element and ip to debug messages
2012-11-21 16:58:14 +00:00
d189a6a7a0
polishing
2012-11-21 16:57:57 +00:00
81a96d722c
added state integration comparison to automated tests
2012-11-21 15:40:44 +00:00
6f488ffa4a
polished, filtered out component 5 of P (should be zero) and increased deformation.
...
less than 5% difference in stress results when using adaptive Euler at a strain of 10%, for other integration schemes error is much smaller
2012-11-21 15:39:27 +00:00
a40b73dc72
for array comparison, only values are taken into consideration that are non zero in array 1 AND array 2
2012-11-21 15:37:59 +00:00
5a723f3f49
introduced test to compare results of different state integrators
2012-11-21 15:05:29 +00:00
78c22d8449
corrected label in case of divergence of tensor, now using correct notation for scalar: divFFT(data) instead of 1_divFFT(data)
2012-11-21 10:31:52 +00:00
547b8bbf02
Added report of SUCCESSFUL test for Revision 1933
2012-11-21 04:26:52 +00:00
b5945ced5e
changed counting of rows from pythonic (starting at 0) to human way (starting at 1)
2012-11-20 10:27:09 +00:00
6cea8a33b4
Added report of SUCCESSFUL test for Revision 1931
2012-11-20 03:24:14 +00:00
760af1fbbf
crystallite_requested now masked by execIP, now elemhomogeneous works again
2012-11-19 15:13:48 +00:00
d4a59541ad
removed write statements which were introduced for "debuging"
2012-11-19 15:12:11 +00:00
9fb94cd707
breaking crystallite loop in case of terminally ill (this functionality was probably lost since rev1886)
2012-11-19 08:39:48 +00:00
4195d53d11
message of last commit was incomplete: moved annihilation of screw dipoles from dotstate to deltaState, since it is not a rate
2012-11-17 13:54:22 +00:00
467c186f0f
annihilation of screws
2012-11-17 13:50:20 +00:00
dc5cd8a4c4
A modified twin-twin interaction matrix for BCC is introduced.
...
An introduction of a third parameter at the interactionTwinTwin in the material.config for BCC-dislotwin materials is essential.
2012-11-16 13:39:08 +00:00
9c489149b5
Added report of SUCCESSFUL test for Revision 1924
2012-11-16 02:06:54 +00:00
6101a9bb17
seems to be a windows lnk containing particular directory info of Claudio...
2012-11-15 22:49:29 +00:00
d9a98417ca
switched element library to geomType based.
...
saves to copy same geometry description for different elements that are essentially similar regarding the IP number but differ in total node count.
introduced quadratic tetrahedron (Marc element 127 -- element 157 might also work, but did not perform well in fully elastic calc so far)
2012-11-15 22:45:20 +00:00
36b890fba3
comment added
2012-11-15 15:55:15 +00:00
5892732672
Testing of J2 Plasticity by Comparing the results of the simualtion on Marc with analytical results based on constitutive equations
2012-11-15 15:40:32 +00:00
aec163941d
calculate ip coordinates only once when the first ip enters calculation mode
2012-11-15 12:31:39 +00:00
bdbc202c7e
corrected typos
2012-11-15 09:22:36 +00:00
280bdd3a30
Added report of SUCCESSFUL test for Revision 1917
2012-11-15 02:23:14 +00:00
c0a5a1dfd1
Formation of the Slip-Slip interaction matrix for BCC.
2012-11-14 17:35:33 +00:00
7e683ca7c3
removed coordinates from call to CPFEM_general and introduced direct storage of coordinates to mesh_ipCoordinates
2012-11-14 14:38:10 +00:00
1896c07c70
corrected some bugs in the last commits
2012-11-14 14:33:41 +00:00
c8be3a03bd
The twin system <111>{112} for BCC is introduced.
2012-11-14 13:43:59 +00:00
6b010b4a46
Twin-slip interaction matrix for BCC is set to 0.
2012-11-14 11:53:22 +00:00
b0464ad176
A modified slip-twin interaction matrices for FCC and BCC are introduced.
...
The shear twin value for BCC is corrected.
An introduction of a third parameter at the interactionSlipTwin in the material.config for dislotwin materials is essential.
2012-11-14 11:13:16 +00:00
b988caa6ba
added script to add deviatoric and hydrostatic part of a tensor to ASCII table
2012-11-14 10:46:51 +00:00
fb2981b4c4
switched matrix indices in SlipSlip, SlipTwin, TwinSlip, and TwinTwin such that first index refers to first name and second to second...
2012-11-14 10:27:23 +00:00
e4ce63d689
switched matrix indices in SlipSlip, SlipTwin, TwinSlip, and TwinTwin such that first index refers to first name and second to second... (used to be transposed for memory efficiency)
2012-11-14 10:22:34 +00:00
789e6c7d83
dropped support of MSC.Marc/Mentat 2007 and 2008
2012-11-14 09:57:18 +00:00
ad9639f2f7
check for existence of files before sym-linking to them.
2012-11-14 09:40:45 +00:00
0513bf3256
Added report of SUCCESSFUL test for Revision 1905
2012-11-14 02:24:42 +00:00
c3926efd93
introduced logic to use gfortran as default if ifort is not found
2012-11-13 19:12:00 +00:00
922042d8d5
now automatically using gfortran if no ifort is found
2012-11-13 18:40:14 +00:00
Martin Diehl