60f3571266
added code lines for OpenMP, however it does not work yet!
2008-05-26 13:11:25 +00:00
51e596c81d
small polishing to be compatible with NAG compiler (basis for automatic differentiation)
2008-04-29 12:18:17 +00:00
9626c25bfb
crystallite: restoration of last known good Lp_guess
...
CPFEM_Taylor: exit whenever cutback limit exceeded
2008-04-28 16:04:08 +00:00
cdb2dd8808
crystallite:
...
added full check whether residuum in inner loop is NaN
SingleCrystallite now takes/stores Lp guess
CPFEM_Taylor (missing in GIA!!):
former fully plastic guess for Lp has been exchanged by keeping the last converged Lp (global array CPFEM_Lp) to serve as new best guess for the next time step. This speeds up the inner loop of TimeIntegration.
2008-04-16 17:00:28 +00:00
fa2d6b9b6d
Make use of average consistent tangent dPdF_bar to fill eventual holes in the individual dPdF of one orientation (during consistent tangent calculation)
2008-04-11 13:04:25 +00:00
664a29c183
Subscript Crystal_ changed to Lattice_ according to the module Lattice
2008-04-10 12:13:37 +00:00
9d2ce61698
A revision for CPFEM_Taylor.f90.
2008-04-10 11:22:17 +00:00
d2312e81ff
deleted CFPFEM.f90 and crystal.f90 from repository
...
adopted mattex.mpie to use lattice_structure instead of crystal_structure
2008-04-09 15:35:16 +00:00
12dfbaf6b4
# separated CPFEM_Crystallite from CPFEM. Now in separate module crystallite.f90 as "SingleCrystallite"
...
# improved SingleCrystallite to advance by true cutbacking (instead of improving guess and integrating always from t_0)
# module "crystal" renamed to "lattice" together with its prefix for variables
# extension of "computationMode" to deal with cutbacks (CPFEM_general).
# cutback and new inc detection for MARC is based on common block variable cptim (and inc), not incsub anymore!
# generalized GrainInterAction as new homogenization scheme
# two symbolic links are required: constitutive.f90 and CPFEM.f90
2008-04-07 14:54:29 +00:00
c063ce5bc1
add a kronecker delta function
2008-03-27 11:54:34 +00:00
5462d2c754
just a correction for a little typo :P
2008-03-27 11:53:53 +00:00
f3eda7cdaa
include a new function epsilon_ijk, i.e., the permutation function (used to compute the cross product of two tensors)
2008-03-26 13:35:01 +00:00
92ee2cbf7d
to include 2 material parameters, i.e., grain size and the length of burgers vector used in GIA model
2008-03-26 09:33:12 +00:00
cc7e13d351
New update of constitutive_dislo.f60 considering the changes in mesh.f90 (see map_ElemType)
...
Parameters assignation, hardening matrices and constitutive equations are PROPERLY implemented (tested)
Comparison to my own old subroutine: on going
2008-03-25 14:19:22 +00:00
7faf4093a5
reflect change of mesh_element(2,e) in mesh.f90
...
-change of line, and those below, will be ignored--
M constitutive_pheno.f90
2008-03-25 13:59:22 +00:00
3640a48095
changed element type mapping to be performed right after input file
...
parsing. mesh_element(2,e) now contains INTERNAL type index -- no
subsequent mapping necessary anymore!
2008-03-25 12:52:27 +00:00
6d721dc16c
Modifications of cpfem_marc2005r3 according the ones in cpfem_marc2007r1
2008-03-14 21:56:46 +00:00
1267ce78b6
CPFEM_general now independed of the wrapper code (UMAT, hypela2, etc.)
...
renamed CPFEM_stressIP to CPFEM_MaterialPoint
renamed CPFEM_stressCrystallite to CPFEM_Crystallite
introduced new global variables to keep track of FE state within module
FEsolving
2008-03-14 21:32:57 +00:00
7975d62586
CPFEM_general now independed of the wrapper code (UMAT, hypela2, etc.)
...
renamed CPFEM_stressIP to CPFEM_MaterialPoint
renamed CPFEM_stressCrystallite to CPFEM_Crystallite
introduced new global variables to keep track of FE state within module
FEsolving
2008-03-14 21:29:31 +00:00
0a08d9eff0
Corrected errors from the last release of constitutive_dislo
...
Changed parameter designation in mattex file
2008-03-14 16:23:08 +00:00
6950eee59b
altered stress and strain "language" to first PK and deformation gradient.
...
plot_results are now part of the crystallite result and not explicitly called from the homogenization layer.
2008-03-14 14:19:10 +00:00
6f06133b90
removed some unused variables
2008-03-14 08:23:43 +00:00
778cbcd3ca
changed file read formats from explicit types to more general (and not
...
harmful) '*'
2008-03-12 13:53:00 +00:00
5641cfd477
changed precision assignment to intrinsic (and standardized)
...
"selected_*_kind"
2008-03-07 15:21:46 +00:00
c74e071f5e
updated constitutive_xxx to reflect new 9x9 dLp_dTstar - used to be 3x3x3x3
2008-02-21 12:50:37 +00:00
9c1e8a7944
added acceleration capability after time-step cut backing
2008-02-21 10:33:34 +00:00
9707fd0f8f
full update, i.e. my development snapshot
2008-02-19 12:58:46 +00:00
f4edf4bd0c
2007
...
shortened stress_recovery = ...
added (crucial) deMandeling for return values of CPFEM_general
2005
matched to 2007 version
2008-02-18 18:49:06 +00:00
2b567ad20d
CPFEM
...
changed consistent tangent scheme to D.Tjahjanto Diss version
fixed nasty bug in decision when to calculate new values (CPFEM_general)
prec
precision values should now be on safe side.
2008-02-18 18:11:24 +00:00
199c65cdba
changed pert_e to new perturbation value pert_Fg
2008-02-18 10:46:18 +00:00
1106bb27eb
introduced logical "debugger"
2008-02-18 10:45:46 +00:00
e07d38fdec
ooops. missed nInner and nOuter as loop counters...
2008-02-18 10:41:37 +00:00
9c9cdeb58b
corrected nStress and nState to reflect more general nInner and nOuter (now vompatible with changes in prec.f90)
2008-02-18 10:39:39 +00:00
cfaa0e696d
exchanged TINY (from prec) with intrinsic "tiny" function (Fortran90)
2008-02-15 12:42:27 +00:00
a41a4a75ef
CPFEM:
...
time integration scheme changed to start from guessing of Lp.
Newton-Raphson algorithm now accelerates as long as residuum improves.
IO:
added error 650 for polar decomposition problems
prec:
some cleanup. Introduced "relevantStrain" for convergence checking in CPFEM
2008-02-15 10:04:49 +00:00
f39c68dded
CPFEM_stressCrystallite must be called with t not dt in CPFEM_stressIP
2008-02-08 08:25:19 +00:00
6a3a9e8f98
Added more detailed reporting
2008-01-11 18:32:02 +00:00
720d8da82b
Corrected syntax
2008-01-10 19:00:45 +00:00
b8b171c95b
Introduce debug module, contains distributions of nCutback, nStressLoop, and nStateLoop
2008-01-10 18:53:57 +00:00
3a7ec38a3d
Delete unused physical constants from pheno
...
Rename Boltzmann Constant Kb->kB
2008-01-10 18:51:58 +00:00
1233d01cd5
mesh_maxNsharedElems is now correct. Added check for multiple identical nodes in an element, e.g. triangular quad-element and the like.
2008-01-10 17:12:33 +00:00
fe70a82d6d
!!!!! IMPORTANT !!!!!
...
All subroutines were committed at once:
- constitutive_pheno works
- constitutive_dislo without twinning also works
This release should serve as reference
2007-12-14 13:36:04 +00:00
3ef451824c
just a test
2007-12-14 13:28:41 +00:00
90195fe1c8
Commit dislo
2007-12-11 14:30:21 +00:00
ab0bde576e
Commit of IO
2007-12-11 14:23:33 +00:00
32fc32865f
Commit of mesh
2007-12-11 14:23:21 +00:00
08a1c38c73
Finalizing the implementation of deformation twinning in constitutive_dislo.f90
...
Assume to be ready to use
2007-12-10 12:55:43 +00:00
d0f6c81d66
constitutive_Microstructure() computes now twin "plop" volumes from the given microstructure.
...
Mattex.dat has 2 parameters for deformation twinning:
- average grain size
- average twin stack thickness
2007-12-07 15:12:43 +00:00
44d6235777
Constitutive_dislo.f90 contains now a modified version of HomogenisedC that accounts for twin reoriented regions.
...
ONLY constitutive_dislo was changed, NOT constitutive.pheno
2007-12-07 14:17:42 +00:00
b69aa2b112
Construction of the elasticity matrices for rotated/twin regions.
...
Definition of constitutive_Ntwin and constitutive_MaxNtwin
2007-12-07 13:59:15 +00:00
e18f304c5a
Crystal.f90 contains now the twin systems (at least for fcc, not implemented for bcc and hcp).
...
Schmid and transformations matrices for twin systemss are defined and constructed. Twin systems are specified using the type of variables as slip systems:
"MaxNTwin", "MaxMaxNtwin" ...
2007-12-07 12:36:17 +00:00
f63f6949cc
Corrected undefined "state" in HomogenisedC
...
Added "forall" loops in C construction
2007-12-07 10:54:19 +00:00
d615406722
Corrected HomogenisedC:
...
1- No dependence on material volume fractions!!!
2- Can now depend on state of microstructure
changed some loops from Nstatevars to Nslip
2007-12-07 10:37:06 +00:00
975c113ae8
Homogenised C per grain can now depend on microstructure (important for deformation twinning)
2007-12-07 10:34:21 +00:00
3c0d51542e
Changed to SI conformity. Mattex file changed bg->burgers
2007-11-15 17:04:30 +00:00
ad3ccf22c2
clarified tolerances in prec (abs vs rel)
...
all units conform to SI now !! (especially MPa --> Pa)
CONSEQUENCE: mattex files need to respect SI
2007-11-15 11:21:37 +00:00
e86a288a21
CPFEM_dummy_stress now user-given constant in _init (SI units !!)
2007-11-15 11:12:58 +00:00
896c37ede2
changed structure of CPFEM_general to allow for non local algorithm and parrallelisation
2007-11-08 08:26:02 +00:00
8619a92009
made sumVolfrac real also in constitutive_dislo.f90
2007-11-07 15:02:54 +00:00
56e82e0fe2
changed sumVolfrac to real
2007-11-06 11:21:46 +00:00
d94f6c80de
deleted unused variable constitutive_results
...
constitutive_maxNresults gets now calculated as maxval instead of hardwired
2007-11-06 10:21:03 +00:00
4dbf6ac3fa
added volume fraction of orientation to output array (now CPFEM_Nresults = 4)
2007-11-06 08:30:04 +00:00
d2471ab479
corrected formating error in output from mesh
2007-10-26 13:39:54 +00:00
909ebf2cd0
removed unused variables
...
corrected allocation error in constitutive_dislo.f90
2007-10-24 15:24:49 +00:00
20693b9d38
hybrid IA sampling now respects sample symmetry
2007-10-24 15:13:10 +00:00
bf35fa4868
former revision of mesh.f90 caused segmentation fault. probably due to
...
string assignment across memory. fixed now...
2007-10-24 11:25:58 +00:00
f0617b74f6
added output of mesh statistics at end of input file parsing
2007-10-24 09:00:42 +00:00
67a5711ed1
added awareness of set definitions (new function build_elemSetMapping)
...
added new style tables for initial conditions
2007-10-23 13:09:46 +00:00
ca0e2e55df
fixed broken IO_continousIntValues to be aware of element (or other)
...
sets
-This line, and those below, will be ignored--
M IO.f90
2007-10-23 13:08:27 +00:00
9043b4374e
Corrected the treatment of interaction coefficients in constitutive_dislo
2007-10-22 15:32:45 +00:00
57ed908129
removed unused variables
...
made hardening matrix finally (?) work
2007-10-22 14:53:10 +00:00
b611af8826
Hardening coefficient now corrected for coplanar systems
2007-10-17 15:12:00 +00:00
1aef23baf7
Initialization, allocation and computation of hardening matrices reviewed.
2007-10-16 17:12:27 +00:00
b0279435e3
CPFEM_Temperature is now a function of the element number and the integration point number
2007-10-16 17:08:06 +00:00
ea65703f83
Interaction type matrices are defined in a more convenient way
2007-10-16 17:05:36 +00:00
ee81ae29df
Update of mattex file (monoclinic-2)
2007-10-16 16:59:55 +00:00
71e870032f
output Euler angles in Degree
2007-10-16 14:47:09 +00:00
1da4244900
reintruduced temperature in call of CPFEM_general, got lost when changing to version dependent top files
2007-10-16 13:42:48 +00:00
5d566f63fd
corrected plotv
...
names of common blocks changed in marc2007r1, therfore we now have mpie_cpfem_marc2007r1.f90 and mpie_cpfem_marc2005r3.f90
2007-10-16 13:22:39 +00:00
296f09d225
Checked computation of hardening matrix
...
In case of constitutive_pheno.f90, the computation can be optimized.
Mattex file slightly modified
2007-10-16 12:20:58 +00:00
ad470f6ee0
Added explanations and comments in mattex file
...
The dislocation based constitutive subroutine can be only use for fcc crystal !!!!
The constitutive equations are different for bcc and hcp.
2007-10-16 12:11:58 +00:00
4a70b4dbbc
Added a possible example of mattex file
...
Some syntax corrections
2007-10-16 11:50:51 +00:00
79c4f20f1c
Two changes:
...
- call of concom and creep, now marc_concom and marc_creep. Franz will check if the parameters within the two modules in the new release, Mentat2007, are the same compared to the old release.
- hard coded include of "constitutive.pheno". That should be changed by the mean of dynamic links
2007-10-16 11:45:05 +00:00
d8ce85c033
Syntax corrections. Update of constitutive.pheno and constitutive.dislo.
2007-10-16 11:30:05 +00:00
e1e7f10dc4
Constitutive_dislo contains the dislocation-based modeling of crystal plasticity.
2007-10-16 09:01:19 +00:00
b476aa4028
CPFEM.f90 contains the following modifications:
...
-Temperature is now defined as a CPFEM_Temperature, and filled for each new call of CPFEM_general according the value output by MARC
-constitutive_Microstructure(state_new,CPFEM_Temperature,grain,CPFEM_in,cp_en) is used in the state loop and before entering in the stress loop. This subroutine computes all parameters,arrays or matrices required from the state, i.e. forest or parallel or mobile dislocation densities from the statistically stored dislocation densities. Its definition is made in module constitutive.
2007-10-16 08:33:59 +00:00
ab0fddf518
Module crystal contains a so-called interaction type matrix for each crystal structure. This matrix helps for computing the hardening matrix in case of a phenomenological constitutive or the dislocation interaction intensity matrix in case of a dislocation-based constitutive.
...
Definition can be discuss.
Corresponding changes should be carried on constitutive.f90
2007-10-16 08:23:38 +00:00
ccafbf9a0f
Temperature T(1) is now transmitted to the CPFEM_general subroutine. Corresponding changes should be carried on CPFEM.f90
2007-10-16 08:18:57 +00:00
e3dcaa6915
outer crystal system loop now runs up to _MaxCrystalStructure (used to be hardcoded 3)
2007-10-15 14:36:25 +00:00
5a82f22681
resubmit of IO_countContinousIntValues (did not check fortran syntax -- should be fine now)
2007-10-15 13:57:50 +00:00
08a9985179
added function IO_countContinousIntValues
...
to read number of items in set definitions:
123 to 423
or something like
1 3 5 6 7 9 10 c
12 14
2007-10-15 13:55:52 +00:00
532d3c2a16
added use crystal statement before call of crystal_init
2007-10-15 10:16:51 +00:00
64f3f6ccee
crystal_init() included in CPFEM.f90
2007-10-15 09:30:57 +00:00
b0ef9e4a94
added element types
...
11 (4node 2D linear full) and
27 (8node 2D quadratic full)
2007-10-12 13:48:29 +00:00
4ce8270415
corrected some variable names
2007-10-11 11:42:37 +00:00
a6fef91c6b
Extraction crystal structure information from constitutive.f90. Creation of crystal.f90
2007-10-11 11:36:09 +00:00
7bc27e02ca
keyword "table" appeared more than once -- restricted interpretation to header
2007-09-28 14:56:26 +00:00
892f33591c
adapted to new default table style in 2007R1
...
hypoelastic part of input file needs skipping an additional line if new style tables are active
2007-09-28 14:16:03 +00:00
28fc9cc221
put recalculation of elastic stress back in (was accidentally deleted)
...
changed check of residuum improvement for small residuum
2007-08-13 07:12:24 +00:00
85df3b95ee
changed restriction of dTstar, its now based on the residuum, if it does not improve 0.5*dTstar is used instead
2007-08-07 08:02:31 +00:00
Franz Roters