removed (virtually) dead single-precision branch of the spectral solver.
This commit is contained in:
Philip Eisenlohr
parent
fbe908ccd2
commit
e62d083f7a
|
|
@ -1,603 +0,0 @@
|
|||
! Copyright 2011 Max-Planck-Institut für Eisenforschung GmbH
|
||||
!
|
||||
! This file is part of DAMASK,
|
||||
! the Düsseldorf Advanced MAterial Simulation Kit.
|
||||
!
|
||||
! DAMASK is free software: you can redistribute it and/or modify
|
||||
! it under the terms of the GNU General Public License as published by
|
||||
! the Free Software Foundation, either version 3 of the License, or
|
||||
! (at your option) any later version.
|
||||
!
|
||||
! DAMASK is distributed in the hope that it will be useful,
|
||||
! but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
! GNU General Public License for more details.
|
||||
!
|
||||
! You should have received a copy of the GNU General Public License
|
||||
! along with DAMASK. If not, see <http://www.gnu.org/licenses/>.
|
||||
!
|
||||
!##############################################################
|
||||
!* $Id: mpie_spectral.f90 769 2011-02-21 14:37:38Z MPIE\m.diehl $
|
||||
!********************************************************************
|
||||
! Material subroutine for BVP solution using spectral method
|
||||
!
|
||||
! written by P. Eisenlohr,
|
||||
! F. Roters,
|
||||
! L. Hantcherli,
|
||||
! W.A. Counts,
|
||||
! D.D. Tjahjanto,
|
||||
! C. Kords,
|
||||
! M. Diehl,
|
||||
! R. Lebensohn
|
||||
!
|
||||
! MPI fuer Eisenforschung, Duesseldorf
|
||||
!
|
||||
!********************************************************************
|
||||
! Usage:
|
||||
! - start program with mpie_spectral PathToGeomFile/NameOfGeom.geom
|
||||
! PathToLoadFile/NameOfLoadFile.load
|
||||
! - PathToGeomFile will be the working directory
|
||||
! - make sure the file "material.config" exists in the working
|
||||
! directory. For further configuration use "numerics.config"
|
||||
!********************************************************************
|
||||
program DAMASK_spectral
|
||||
!********************************************************************
|
||||
|
||||
use DAMASK_interface
|
||||
use prec, only: pInt, pReal
|
||||
use IO
|
||||
use math
|
||||
use CPFEM, only: CPFEM_general, CPFEM_initAll
|
||||
use numerics, only: err_div_tol, err_stress_tol, err_stress_tolrel, err_defgrad_tol,&
|
||||
itmax, memory_efficient, mpieNumThreadsInt
|
||||
use homogenization, only: materialpoint_sizeResults, materialpoint_results
|
||||
!$ use OMP_LIB ! the openMP function library
|
||||
|
||||
implicit none
|
||||
include 'fftw3.f' !header file for fftw3 (declaring variables). Library files are also needed
|
||||
! compile FFTW 3.2.2 with ./configure --enable-threads
|
||||
! variables to read from loadcase and geom file
|
||||
real(pReal), dimension(9) :: valuevector ! stores information temporarily from loadcase file
|
||||
integer(pInt), parameter :: maxNchunksInput = 24 ! 4 identifiers, 18 values for the matrices and 2 scalars
|
||||
integer(pInt), dimension (1+maxNchunksInput*2) :: posInput
|
||||
integer(pInt), parameter :: maxNchunksGeom = 7 ! 4 identifiers, 3 values
|
||||
integer(pInt), dimension (1+2*maxNchunksGeom) :: posGeom
|
||||
integer(pInt) unit, N_l, N_s, N_t, N_n ! numbers of identifiers
|
||||
character(len=1024) path, line
|
||||
logical gotResolution,gotDimension,gotHomogenization
|
||||
logical, dimension(9) :: bc_maskvector
|
||||
|
||||
! variables storing information from loadcase file
|
||||
real(pReal) timeinc
|
||||
real(pReal), dimension (:,:,:), allocatable :: bc_velocityGrad, &
|
||||
bc_stress ! velocity gradient and stress BC
|
||||
real(pReal), dimension(:), allocatable :: bc_timeIncrement ! length of increment
|
||||
integer(pInt) N_Loadcases, steps
|
||||
integer(pInt), dimension(:), allocatable :: bc_steps ! number of steps
|
||||
logical, dimension(:,:,:,:), allocatable :: bc_mask ! mask of boundary conditions
|
||||
|
||||
! variables storing information from geom file
|
||||
real(pReal) wgt
|
||||
real(pReal), dimension(3) :: geomdimension
|
||||
integer(pInt) homog
|
||||
integer(pInt), dimension(3) :: resolution
|
||||
|
||||
! stress etc.
|
||||
real(pReal), dimension(3,3) :: ones, zeroes, temp33_Real, damper,&
|
||||
pstress, pstress_av, cstress_av, defgrad_av,&
|
||||
defgradAim, defgradAimOld, defgradAimCorr, defgradAimCorrPrev,&
|
||||
mask_stress, mask_defgrad
|
||||
real(pReal), dimension(3,3,3,3) :: dPdF, c0, s0
|
||||
real(pReal), dimension(6) :: cstress ! cauchy stress in Mandel notation
|
||||
real(pReal), dimension(6,6) :: dsde, c066, s066 ! Mandel notation of 4th order tensors
|
||||
real(pReal), dimension(:,:,:,:,:), allocatable :: workfft, defgrad, defgradold
|
||||
real(pReal), dimension(:,:,:,:), allocatable :: coordinates
|
||||
|
||||
! variables storing information for spectral method
|
||||
complex(pReal) :: img
|
||||
complex(pReal), dimension(3,3) :: temp33_Complex
|
||||
real(pReal), dimension(3,3) :: xinormdyad
|
||||
real(pReal), dimension(:,:,:,:,:,:,:), allocatable :: gamma_hat
|
||||
real(pReal), dimension(3) :: xi, xi_central
|
||||
integer(pInt), dimension(3) :: k_s
|
||||
integer*8, dimension(2) :: plan_fft
|
||||
|
||||
! loop variables, convergence etc.
|
||||
real(pReal) guessmode, err_div, err_stress, err_defgrad, sigma0
|
||||
integer(pInt) i, j, k, l, m, n, p
|
||||
integer(pInt) loadcase, ielem, iter, calcmode, CPFEM_mode, ierr
|
||||
logical errmatinv
|
||||
|
||||
real(pReal) temperature ! not used, but needed for call to CPFEM_general
|
||||
|
||||
!Initializing
|
||||
!$ call omp_set_num_threads(mpieNumThreadsInt) ! set number of threads for parallel execution set by MPIE_NUM_THREADS
|
||||
|
||||
bc_maskvector = ''
|
||||
unit = 234_pInt
|
||||
ones = 1.0_pReal; zeroes = 0.0_pReal
|
||||
img = cmplx(0.0,1.0)
|
||||
|
||||
N_l = 0_pInt; N_s = 0_pInt
|
||||
N_t = 0_pInt; N_n = 0_pInt
|
||||
gotResolution =.false.; gotDimension =.false.; gotHomogenization = .false.
|
||||
resolution = 1_pInt; geomdimension = 0.0_pReal
|
||||
|
||||
temperature = 300.0_pReal
|
||||
|
||||
if (IargC() /= 2) call IO_error(102) ! check for correct number of given arguments
|
||||
|
||||
! Reading the loadcase file and assign variables
|
||||
path = getLoadcaseName()
|
||||
print '(a,/,a)', 'Loadcase: ',trim(path)
|
||||
print '(a,/,a)', 'Workingdir: ',trim(getSolverWorkingDirectoryName())
|
||||
print '(a,/,a)', 'SolverJobName: ',trim(getSolverJobName())
|
||||
|
||||
if (.not. IO_open_file(unit,path)) call IO_error(45,ext_msg = path)
|
||||
|
||||
rewind(unit)
|
||||
do
|
||||
read(unit,'(a1024)',END = 101) line
|
||||
if (IO_isBlank(line)) cycle ! skip empty lines
|
||||
posInput = IO_stringPos(line,maxNchunksInput)
|
||||
do i = 1, maxNchunksInput, 1
|
||||
select case (IO_lc(IO_stringValue(line,posInput,i)))
|
||||
case('l','velocitygrad')
|
||||
N_l = N_l+1
|
||||
case('s','stress')
|
||||
N_s = N_s+1
|
||||
case('t','time','delta')
|
||||
N_t = N_t+1
|
||||
case('n','incs','increments','steps')
|
||||
N_n = N_n+1
|
||||
end select
|
||||
enddo ! count all identifiers to allocate memory and do sanity check
|
||||
enddo
|
||||
|
||||
101 N_Loadcases = N_l
|
||||
|
||||
! allocate memory depending on lines in input file
|
||||
allocate (bc_velocityGrad(3,3,N_Loadcases)); bc_velocityGrad = 0.0_pReal
|
||||
allocate (bc_stress(3,3,N_Loadcases)); bc_stress = 0.0_pReal
|
||||
allocate (bc_mask(3,3,2,N_Loadcases)); bc_mask = .false.
|
||||
allocate (bc_timeIncrement(N_Loadcases)); bc_timeIncrement = 0.0_pReal
|
||||
allocate (bc_steps(N_Loadcases)); bc_steps = 0_pInt
|
||||
|
||||
rewind(unit)
|
||||
i = 0_pInt
|
||||
do
|
||||
read(unit,'(a1024)',END = 200) line
|
||||
if (IO_isBlank(line)) cycle ! skip empty lines
|
||||
i = i + 1
|
||||
posInput = IO_stringPos(line,maxNchunksInput)
|
||||
do j = 1,maxNchunksInput,2
|
||||
select case (IO_lc(IO_stringValue(line,posInput,j)))
|
||||
case('l','velocitygrad')
|
||||
valuevector = 0.0_pReal
|
||||
forall (k = 1:9) bc_maskvector(k) = IO_stringValue(line,posInput,j+k) /= '#'
|
||||
do k = 1,9
|
||||
if (bc_maskvector(k)) valuevector(k) = IO_floatValue(line,posInput,j+k) ! assign values for the velocity gradient matrix
|
||||
enddo
|
||||
bc_mask(:,:,1,i) = transpose(reshape(bc_maskvector,(/3,3/)))
|
||||
bc_velocityGrad(:,:,i) = math_transpose3x3(reshape(valuevector,(/3,3/)))
|
||||
case('s','stress')
|
||||
valuevector = 0.0_pReal
|
||||
forall (k = 1:9) bc_maskvector(k) = IO_stringValue(line,posInput,j+k) /= '#'
|
||||
do k = 1,9
|
||||
if (bc_maskvector(k)) valuevector(k) = IO_floatValue(line,posInput,j+k) ! assign values for the bc_stress matrix
|
||||
enddo
|
||||
bc_mask(:,:,2,i) = transpose(reshape(bc_maskvector,(/3,3/)))
|
||||
bc_stress(:,:,i) = math_transpose3x3(reshape(valuevector,(/3,3/)))
|
||||
case('t','time','delta') ! increment time
|
||||
bc_timeIncrement(i) = IO_floatValue(line,posInput,j+1)
|
||||
case('n','incs','increments','steps') ! bc_steps
|
||||
bc_steps(i) = IO_intValue(line,posInput,j+1)
|
||||
end select
|
||||
enddo; enddo
|
||||
|
||||
200 close(unit)
|
||||
|
||||
do i = 1, N_Loadcases
|
||||
if (any(bc_mask(:,:,1,i) == bc_mask(:,:,2,i))) call IO_error(46,i) ! bc_mask consistency
|
||||
if (bc_timeIncrement(i) < 0.0_pReal) call IO_error(47,i) ! negative time increment forbidden
|
||||
if (bc_steps(i) < 1_pInt) call IO_error(48,i) ! non-positive increments requested
|
||||
print '(a,/,3(3(f12.6,x)/))','L:' ,math_transpose3x3(bc_velocityGrad(:,:,i))
|
||||
print '(a,/,3(3(f12.6,x)/))','bc_stress:',math_transpose3x3(bc_stress(:,:,i))
|
||||
print '(a,/,3(3(l,x)/))', 'bc_mask for velocitygrad:',transpose(bc_mask(:,:,1,i))
|
||||
print '(a,/,3(3(l,x)/))', 'bc_mask for stress:' ,transpose(bc_mask(:,:,2,i))
|
||||
print '(a,f12.6)','time: ',bc_timeIncrement(i)
|
||||
print '(a,i5)','incs: ',bc_steps(i)
|
||||
print *, ''
|
||||
enddo
|
||||
|
||||
!read header of geom file to get the information needed before the complete geom file is intepretated by mesh.f90
|
||||
path = getModelName()
|
||||
print '(a,a)', 'GeomName: ',trim(path)
|
||||
if (.not. IO_open_file(unit,trim(path)//InputFileExtension)) call IO_error(101,ext_msg = trim(path)//InputFileExtension)
|
||||
|
||||
rewind(unit)
|
||||
do
|
||||
read(unit,'(a1024)',END = 100) line
|
||||
if (IO_isBlank(line)) cycle ! skip empty lines
|
||||
posGeom = IO_stringPos(line,maxNchunksGeom)
|
||||
|
||||
select case ( IO_lc(IO_StringValue(line,posGeom,1)) )
|
||||
case ('dimension')
|
||||
gotDimension = .true.
|
||||
do i = 2,6,2
|
||||
select case (IO_lc(IO_stringValue(line,posGeom,i)))
|
||||
case('x')
|
||||
geomdimension(1) = IO_floatValue(line,posGeom,i+1)
|
||||
case('y')
|
||||
geomdimension(2) = IO_floatValue(line,posGeom,i+1)
|
||||
case('z')
|
||||
geomdimension(3) = IO_floatValue(line,posGeom,i+1)
|
||||
end select
|
||||
enddo
|
||||
case ('homogenization')
|
||||
gotHomogenization = .true.
|
||||
homog = IO_intValue(line,posGeom,2)
|
||||
case ('resolution')
|
||||
gotResolution = .true.
|
||||
do i = 2,6,2
|
||||
select case (IO_lc(IO_stringValue(line,posGeom,i)))
|
||||
case('a')
|
||||
resolution(1) = IO_intValue(line,posGeom,i+1)
|
||||
case('b')
|
||||
resolution(2) = IO_intValue(line,posGeom,i+1)
|
||||
case('c')
|
||||
resolution(3) = IO_intValue(line,posGeom,i+1)
|
||||
end select
|
||||
enddo
|
||||
end select
|
||||
if (gotDimension .and. gotHomogenization .and. gotResolution) exit
|
||||
enddo
|
||||
100 close(unit)
|
||||
|
||||
if(mod(resolution(1),2)/=0 .or. mod(resolution(2),2)/=0 .or. mod(resolution(3),2)/=0) call IO_error(103)
|
||||
|
||||
print '(a,/,i4,i4,i4)','resolution a b c:', resolution
|
||||
print '(a,/,f6.1,f6.1,f6.1)','dimension x y z:', geomdimension
|
||||
print '(a,i4)','homogenization: ',homog
|
||||
|
||||
allocate (defgrad (resolution(1),resolution(2),resolution(3),3,3)); defgrad = 0.0_pReal
|
||||
allocate (defgradold(resolution(1),resolution(2),resolution(3),3,3)); defgradold = 0.0_pReal
|
||||
allocate (coordinates(3,resolution(1),resolution(2),resolution(3))); coordinates = 0.0_pReal
|
||||
|
||||
wgt = 1.0_pReal/real(resolution(1)*resolution(2)*resolution(3), pReal)
|
||||
defgradAim = math_I3
|
||||
defgradAimOld = math_I3
|
||||
defgrad_av = math_I3
|
||||
|
||||
! Initialization of CPFEM_general (= constitutive law) and of deformation gradient field
|
||||
call CPFEM_initAll(temperature,1_pInt,1_pInt)
|
||||
ielem = 0_pInt
|
||||
c066 = 0.0_pReal
|
||||
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
|
||||
defgradold(i,j,k,:,:) = math_I3 !no deformation at the beginning
|
||||
defgrad(i,j,k,:,:) = math_I3
|
||||
ielem = ielem +1
|
||||
coordinates(1:3,i,j,k) = mesh_ipCenterOfGravity(1:3,1,ielem) ! set to initial coordinates (SHOULD BE UPDATED TO CURRENT POSITION IN FUTURE REVISIONS!!!)
|
||||
call CPFEM_general(2,coordinates(1:3,i,j,k),math_I3,math_I3,temperature,0.0_pReal,ielem,1_pInt,cstress,dsde,pstress,dPdF)
|
||||
c066 = c066 + dsde
|
||||
enddo; enddo; enddo
|
||||
c066 = c066 * wgt
|
||||
c0 = math_mandel66to3333(c066)
|
||||
call math_invert(6, c066, s066,i, errmatinv)
|
||||
if(errmatinv) call IO_error(800) !Matrix inversion error
|
||||
s0 = math_mandel66to3333(s066)
|
||||
|
||||
if(memory_efficient) then ! allocate just single fourth order tensor
|
||||
allocate (gamma_hat(1,1,1,3,3,3,3)); gamma_hat = 0.0_pReal
|
||||
else ! precalculation of gamma_hat field
|
||||
allocate (gamma_hat(resolution(1)/2+1,resolution(2),resolution(3),3,3,3,3)); gamma_hat = 0.0_pReal
|
||||
do k = 1, resolution(3)
|
||||
k_s(3) = k-1
|
||||
if(k > resolution(3)/2+1) k_s(3) = k_s(3)-resolution(3)
|
||||
do j = 1, resolution(2)
|
||||
k_s(2) = j-1
|
||||
if(j > resolution(2)/2+1) k_s(2) = k_s(2)-resolution(2)
|
||||
do i = 1, resolution(1)/2+1
|
||||
k_s(1) = i-1
|
||||
xi(3) = 0.0_pReal !for the 2D case
|
||||
if(resolution(3) > 1) xi(3) = real(k_s(3), pReal)/geomdimension(3) !3D case
|
||||
xi(2) = real(k_s(2), pReal)/geomdimension(2)
|
||||
xi(1) = real(k_s(1), pReal)/geomdimension(1)
|
||||
if (any(xi /= 0.0_pReal)) then
|
||||
do l = 1,3; do m = 1,3
|
||||
xinormdyad(l,m) = xi(l)*xi(m)/sum(xi**2)
|
||||
enddo; enddo
|
||||
temp33_Real = math_inv3x3(math_mul3333xx33(c0, xinormdyad))
|
||||
else
|
||||
xinormdyad = 0.0_pReal
|
||||
temp33_Real = 0.0_pReal
|
||||
endif
|
||||
do l=1,3; do m=1,3; do n=1,3; do p=1,3
|
||||
gamma_hat(i,j,k, l,m,n,p) = - 0.25*(temp33_Real(l,n)+temp33_Real(n,l)) *&
|
||||
(xinormdyad(m,p)+xinormdyad(p,m))
|
||||
enddo; enddo; enddo; enddo
|
||||
enddo; enddo; enddo
|
||||
endif
|
||||
|
||||
! calculate xi for the calculation of divergence in Fourier space (central frequency)
|
||||
xi_central(3) = 0.0_pReal !2D case
|
||||
if(resolution(3) > 1) xi_central(3) = real(resolution(3)/2, pReal)/geomdimension(3) !3D case
|
||||
xi_central(2) = real(resolution(2)/2, pReal)/geomdimension(2)
|
||||
xi_central(1) = real(resolution(1)/2, pReal)/geomdimension(1)
|
||||
|
||||
allocate (workfft(resolution(1)+2,resolution(2),resolution(3),3,3)); workfft = 0.0_pReal
|
||||
|
||||
! Initialization of fftw (see manual on fftw.org for more details)
|
||||
call sfftw_init_threads(ierr)
|
||||
if(ierr == 0) call IO_error(104,ierr)
|
||||
call sfftw_plan_with_nthreads(mpieNumThreadsInt)
|
||||
call sfftw_plan_many_dft_r2c(plan_fft(1),3,(/resolution(1),resolution(2),resolution(3)/),9,&
|
||||
workfft,(/resolution(1) +2,resolution(2),resolution(3)/),1,(resolution(1) +2)*resolution(2)*resolution(3),&
|
||||
workfft,(/resolution(1)/2+1,resolution(2),resolution(3)/),1,(resolution(1)/2+1)*resolution(2)*resolution(3),FFTW_PATIENT)
|
||||
call sfftw_plan_many_dft_c2r(plan_fft(2),3,(/resolution(1),resolution(2),resolution(3)/),9,&
|
||||
workfft,(/resolution(1)/2+1,resolution(2),resolution(3)/),1,(resolution(1)/2+1)*resolution(2)*resolution(3),&
|
||||
workfft,(/resolution(1) +2,resolution(2),resolution(3)/),1,(resolution(1) +2)*resolution(2)*resolution(3),FFTW_PATIENT)
|
||||
|
||||
! write header of output file
|
||||
open(538,file=trim(getSolverWorkingDirectoryName())//trim(getSolverJobName())&
|
||||
//'.spectralOut',form='UNFORMATTED')
|
||||
write(538), 'load',trim(getLoadcaseName())
|
||||
write(538), 'workingdir',trim(getSolverWorkingDirectoryName())
|
||||
write(538), 'geometry',trim(getSolverJobName())//InputFileExtension
|
||||
write(538), 'resolution',resolution
|
||||
write(538), 'dimension',geomdimension
|
||||
write(538), 'materialpoint_sizeResults', materialpoint_sizeResults
|
||||
write(538), 'increments', sum(bc_steps)
|
||||
write(538), 'eoh'
|
||||
write(538) materialpoint_results(:,1,:)
|
||||
write(538) materialpoint_results(:,1,:) !to be conform with t16 Marc format
|
||||
! Initialization done
|
||||
|
||||
!*************************************************************
|
||||
!Loop over loadcases defined in the loadcase file
|
||||
do loadcase = 1, N_Loadcases
|
||||
!*************************************************************
|
||||
|
||||
timeinc = bc_timeIncrement(loadcase)/bc_steps(loadcase)
|
||||
guessmode = 0.0_pReal ! change of load case, homogeneous guess for the first step
|
||||
|
||||
mask_defgrad = merge(ones,zeroes,bc_mask(:,:,1,loadcase))
|
||||
mask_stress = merge(ones,zeroes,bc_mask(:,:,2,loadcase))
|
||||
damper = ones/10
|
||||
!*************************************************************
|
||||
! loop oper steps defined in input file for current loadcase
|
||||
do steps = 1, bc_steps(loadcase)
|
||||
!*************************************************************
|
||||
temp33_Real = defgradAim
|
||||
defgradAim = defgradAim & ! update macroscopic displacement gradient (defgrad BC)
|
||||
+ guessmode * mask_stress * (defgradAim - defgradAimOld) &
|
||||
+ math_mul33x33(bc_velocityGrad(:,:,loadcase), defgradAim)*timeinc
|
||||
defgradAimOld = temp33_Real
|
||||
|
||||
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
|
||||
temp33_Real = defgrad(i,j,k,:,:)
|
||||
defgrad(i,j,k,:,:) = defgrad(i,j,k,:,:)& ! old fluctuations as guess for new step, no fluctuations for new loadcase
|
||||
+ guessmode * (defgrad(i,j,k,:,:) - defgradold(i,j,k,:,:))&
|
||||
+ (1.0_pReal-guessmode) * math_mul33x33(bc_velocityGrad(:,:,loadcase),defgradold(i,j,k,:,:))*timeinc
|
||||
defgradold(i,j,k,:,:) = temp33_Real
|
||||
enddo; enddo; enddo
|
||||
|
||||
guessmode = 1.0_pReal ! keep guessing along former trajectory during same loadcase
|
||||
if(all(bc_mask(:,:,1,loadcase))) then
|
||||
calcmode = 1_pInt ! if no stress BC is given (calmode 0 is not needed)
|
||||
else
|
||||
calcmode = 0_pInt ! start calculation of BC fulfillment
|
||||
endif
|
||||
CPFEM_mode = 1_pInt ! winding forward
|
||||
iter = 0_pInt
|
||||
err_div= 2_pReal * err_div_tol ! go into loop
|
||||
defgradAimCorr = 0.0_pReal ! reset damping calculation
|
||||
damper = damper * 0.9_pReal
|
||||
|
||||
!*************************************************************
|
||||
! convergence loop
|
||||
do while(iter < itmax .and. &
|
||||
(err_div > err_div_tol .or. &
|
||||
err_stress > err_stress_tol .or. &
|
||||
err_defgrad > err_defgrad_tol))
|
||||
iter = iter + 1_pInt
|
||||
print*, ' '
|
||||
print '(3(A,I5.5,tr2))', ' Loadcase = ',loadcase, ' Step = ',steps,'Iteration = ',iter
|
||||
cstress_av = 0.0_pReal
|
||||
workfft = 0.0_pReal !needed because of the padding for FFTW
|
||||
!*************************************************************
|
||||
|
||||
! adjust defgrad to fulfill BCs
|
||||
select case (calcmode)
|
||||
case (0)
|
||||
print *, 'Update Stress Field (constitutive evaluation P(F))'
|
||||
ielem = 0_pInt
|
||||
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
|
||||
ielem = ielem + 1
|
||||
call CPFEM_general(3, coordinates(1:3,i,j,k),defgradold(i,j,k,:,:), defgrad(i,j,k,:,:),&
|
||||
temperature,timeinc,ielem,1_pInt,&
|
||||
cstress,dsde, pstress, dPdF)
|
||||
enddo; enddo; enddo
|
||||
|
||||
ielem = 0_pInt
|
||||
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
|
||||
ielem = ielem + 1_pInt
|
||||
call CPFEM_general(CPFEM_mode,& ! first element in first iteration retains CPFEM_mode 1,
|
||||
coordinates(1:3,i,j,k),
|
||||
defgradold(i,j,k,:,:), defgrad(i,j,k,:,:),& ! others get 2 (saves winding forward effort)
|
||||
temperature,timeinc,ielem,1_pInt,&
|
||||
cstress,dsde, pstress, dPdF)
|
||||
CPFEM_mode = 2_pInt
|
||||
workfft(i,j,k,:,:) = pstress
|
||||
cstress_av = cstress_av + math_mandel6to33(cstress)
|
||||
enddo; enddo; enddo
|
||||
|
||||
cstress_av = cstress_av * wgt
|
||||
do m = 1,3; do n = 1,3
|
||||
pstress_av(m,n) = sum(workfft(1:resolution(1),:,:,m,n)) * wgt
|
||||
defgrad_av(m,n) = sum(defgrad(:,:,:,m,n)) * wgt
|
||||
enddo; enddo
|
||||
|
||||
err_stress = maxval(abs(mask_stress * (pstress_av - bc_stress(:,:,loadcase))))
|
||||
err_stress_tol = maxval(abs(pstress_av))*err_stress_tolrel
|
||||
|
||||
print*, 'Correcting deformation gradient to fullfill BCs'
|
||||
defgradAimCorrPrev = defgradAimCorr
|
||||
defgradAimCorr = -mask_stress * math_mul3333xx33(s0, (mask_stress*(pstress_av - bc_stress(:,:,loadcase))))
|
||||
|
||||
do m=1,3; do n =1,3 ! calculate damper (correction is far to strong)
|
||||
if ( sign(1.0_pReal,defgradAimCorr(m,n))/=sign(1.0_pReal,defgradAimCorrPrev(m,n))) then
|
||||
damper(m,n) = max(0.01_pReal,damper(m,n)*0.8)
|
||||
else
|
||||
damper(m,n) = min(1.0_pReal,damper(m,n) *1.2)
|
||||
endif
|
||||
enddo; enddo
|
||||
defgradAimCorr = mask_Stress*(damper * defgradAimCorr)
|
||||
defgradAim = defgradAim + defgradAimCorr
|
||||
|
||||
do m = 1,3; do n = 1,3
|
||||
defgrad(:,:,:,m,n) = defgrad(:,:,:,m,n) + (defgradAim(m,n) - defgrad_av(m,n)) !anticipated target minus current state
|
||||
enddo; enddo
|
||||
err_div = 2 * err_div_tol
|
||||
err_defgrad = maxval(abs(mask_defgrad * (defgrad_av - defgradAim)))
|
||||
print '(a,/,3(3(f12.7,x)/))', ' Deformation Gradient:',math_transpose3x3(defgrad_av)
|
||||
print '(a,/,3(3(f10.4,x)/))', ' Cauchy Stress / MPa: ' ,math_transpose3x3(cstress_av)/1.e6
|
||||
print '(2(a,E8.2))', ' error stress: ',err_stress, ' Tol. = ', err_stress_tol
|
||||
print '(2(a,E8.2))', ' error deformation gradient: ',err_defgrad,' Tol. = ', err_defgrad_tol*0.8
|
||||
if(err_stress < err_stress_tol*0.8) then
|
||||
calcmode = 1_pInt
|
||||
endif
|
||||
|
||||
! Using the spectral method to calculate the change of deformation gradient, check divergence of stress field in fourier space
|
||||
case (1)
|
||||
print *, 'Update Stress Field (constitutive evaluation P(F))'
|
||||
ielem = 0_pInt
|
||||
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
|
||||
ielem = ielem + 1_pInt
|
||||
call CPFEM_general(3, coordinates(1:3,i,j,k),defgradold(i,j,k,:,:), defgrad(i,j,k,:,:),&
|
||||
temperature,timeinc,ielem,1_pInt,&
|
||||
cstress,dsde, pstress, dPdF)
|
||||
enddo; enddo; enddo
|
||||
ielem = 0_pInt
|
||||
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
|
||||
ielem = ielem + 1_pInt
|
||||
call CPFEM_general(CPFEM_mode,& ! first element in first iteration retains CPFEM_mode 1,
|
||||
coordinates(1:3,i,j,k),
|
||||
defgradold(i,j,k,:,:), defgrad(i,j,k,:,:),&
|
||||
temperature,timeinc,ielem,1_pInt,&
|
||||
cstress,dsde, pstress, dPdF)
|
||||
CPFEM_mode = 2_pInt
|
||||
workfft(i,j,k,:,:) = pstress
|
||||
cstress_av = cstress_av + math_mandel6to33(cstress)
|
||||
enddo; enddo; enddo
|
||||
cstress_av = cstress_av * wgt
|
||||
do m = 1,3; do n = 1,3
|
||||
pstress_av(m,n) = sum(workfft(1:resolution(1),:,:,m,n))*wgt
|
||||
enddo; enddo
|
||||
|
||||
print *, 'Calculating equilibrium using spectral method'
|
||||
err_div = 0.0_pReal; sigma0 = 0.0_pReal
|
||||
call sfftw_execute_dft_r2c(plan_fft(1),workfft,workfft) ! FFT of pstress
|
||||
do m = 1,3 ! L infinity Norm of stress tensor
|
||||
sigma0 = max(sigma0, sum(abs(workfft(1,1,1,m,:) + (workfft(2,1,1,m,:))*img)))
|
||||
enddo
|
||||
err_div = (maxval(abs(math_mul33x3_complex(workfft(resolution(1)+1,resolution(2)/2+1,resolution(3)/2+1,:,:)+& ! L infinity Norm of div(stress)
|
||||
workfft(resolution(1)+2,resolution(2)/2+1,resolution(3)/2+1,:,:)*img,xi_central))))
|
||||
err_div = err_div/sigma0 !weighting of error
|
||||
|
||||
if(memory_efficient) then ! memory saving version, in-time calculation of gamma_hat
|
||||
do k = 1, resolution(3)
|
||||
k_s(3) = k-1
|
||||
if(k > resolution(3)/2+1) k_s(3) = k_s(3)-resolution(3)
|
||||
do j = 1, resolution(2)
|
||||
k_s(2) = j-1
|
||||
if(j > resolution(2)/2+1) k_s(2) = k_s(2)-resolution(2)
|
||||
do i = 1, resolution(1)/2+1
|
||||
k_s(1) = i-1
|
||||
xi(3) = 0.0_pReal !for the 2D case
|
||||
if(resolution(3) > 1) xi(3) = real(k_s(3), pReal)/geomdimension(3) !3D case
|
||||
xi(2) = real(k_s(2), pReal)/geomdimension(2)
|
||||
xi(1) = real(k_s(1), pReal)/geomdimension(1)
|
||||
if (any(xi(:) /= 0.0_pReal)) then
|
||||
do l = 1,3; do m = 1,3
|
||||
xinormdyad(l,m) = xi(l)*xi(m)/sum(xi**2)
|
||||
enddo; enddo
|
||||
temp33_Real = math_inv3x3(math_mul3333xx33(c0, xinormdyad))
|
||||
else
|
||||
xinormdyad = 0.0_pReal
|
||||
temp33_Real = 0.0_pReal
|
||||
endif
|
||||
do l=1,3; do m=1,3; do n=1,3; do p=1,3
|
||||
gamma_hat(1,1,1, l,m,n,p) = - 0.25_pReal*(temp33_Real(l,n)+temp33_Real(n,l))*&
|
||||
(xinormdyad(m,p) +xinormdyad(p,m))
|
||||
enddo; enddo; enddo; enddo
|
||||
do m = 1,3; do n = 1,3
|
||||
temp33_Complex(m,n) = sum(gamma_hat(1,1,1,m,n,:,:) *(workfft(i*2-1,j,k,:,:)&
|
||||
+workfft(i*2 ,j,k,:,:)*img))
|
||||
enddo; enddo
|
||||
workfft(i*2-1,j,k,:,:) = real (temp33_Complex)
|
||||
workfft(i*2 ,j,k,:,:) = aimag(temp33_Complex)
|
||||
enddo; enddo; enddo
|
||||
else !use precalculated gamma-operator
|
||||
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)/2+1
|
||||
do m = 1,3; do n = 1,3
|
||||
temp33_Complex(m,n) = sum(gamma_hat(i,j,k, m,n,:,:) *(workfft(i*2-1,j,k,:,:)&
|
||||
+ workfft(i*2 ,j,k,:,:)*img))
|
||||
enddo; enddo
|
||||
workfft(i*2-1,j,k,:,:) = real (temp33_Complex)
|
||||
workfft(i*2 ,j,k,:,:) = aimag(temp33_Complex)
|
||||
enddo; enddo; enddo
|
||||
endif
|
||||
|
||||
workfft(1,1,1,:,:) = defgrad_av - math_I3 !zero frequency (real part)
|
||||
workfft(2,1,1,:,:) = 0.0_pReal !zero frequency (imaginary part)
|
||||
|
||||
call sfftw_execute_dft_c2r(plan_fft(2),workfft,workfft)
|
||||
defgrad = defgrad + workfft(1:resolution(1),:,:,:,:)*wgt
|
||||
do m = 1,3; do n = 1,3
|
||||
defgrad_av(m,n) = sum(defgrad(:,:,:,m,n))*wgt
|
||||
defgrad(:,:,:,m,n) = defgrad(:,:,:,m,n) + (defgradAim(m,n) - defgrad_av(m,n)) !anticipated target minus current state
|
||||
enddo; enddo
|
||||
|
||||
err_stress = maxval(abs(mask_stress * (pstress_av - bc_stress(:,:,loadcase))))
|
||||
err_stress_tol = maxval(abs(pstress_av))*err_stress_tolrel !accecpt relativ error specified
|
||||
err_defgrad = maxval(abs(mask_defgrad * (defgrad_av - defgradAim)))
|
||||
|
||||
print '(2(a,E8.2))', ' error divergence: ',err_div, ' Tol. = ', err_div_tol
|
||||
print '(2(a,E8.2))', ' error stress: ',err_stress, ' Tol. = ', err_stress_tol
|
||||
print '(2(a,E8.2))', ' error deformation gradient: ',err_defgrad,' Tol. = ', err_defgrad_tol
|
||||
|
||||
if((err_stress > err_stress_tol .or. err_defgrad > err_defgrad_tol) .and. err_div < err_div_tol) then ! change to calculation of BCs, reset damper etc.
|
||||
calcmode = 0_pInt
|
||||
defgradAimCorr = 0.0_pReal
|
||||
damper = damper * 0.9_pReal
|
||||
endif
|
||||
end select
|
||||
enddo ! end looping when convergency is achieved
|
||||
|
||||
write(538) materialpoint_results(:,1,:) !write to output file
|
||||
|
||||
print '(a,x,f12.7)' , ' Determinant of Deformation Aim: ', math_det3x3(defgradAim)
|
||||
print '(a,/,3(3(f12.7,x)/))', ' Deformation Aim: ',math_transpose3x3(defgradAim)
|
||||
print '(a,/,3(3(f12.7,x)/))', ' Deformation Gradient:',math_transpose3x3(defgrad_av)
|
||||
print '(a,/,3(3(f10.4,x)/))', ' Cauchy Stress / MPa: ',math_transpose3x3(cstress_av)/1.e6
|
||||
print '(A)', '************************************************************'
|
||||
enddo ! end looping over steps in current loadcase
|
||||
enddo ! end looping over loadcases
|
||||
close(538)
|
||||
call sfftw_destroy_plan(plan_fft(1)); call sfftw_destroy_plan(plan_fft(2))
|
||||
|
||||
end program DAMASK_spectral
|
||||
|
||||
!********************************************************************
|
||||
! quit subroutine to satisfy IO_error
|
||||
!
|
||||
!********************************************************************
|
||||
subroutine quit(id)
|
||||
use prec
|
||||
implicit none
|
||||
|
||||
integer(pInt) id
|
||||
|
||||
stop
|
||||
end subroutine
|
||||
|
|
@ -25,19 +25,17 @@
|
|||
########################################################################################
|
||||
# OPTIONS = standard (alternative): meaning
|
||||
#-------------------------------------------------------------
|
||||
# PRECISION = double (single): floating point precision
|
||||
# F90 = ifort (gfortran): compiler, choose Intel or GNU
|
||||
# PORTABLE = TRUE (FALSE): decision, if executable is optimized for the machine on which it was built.
|
||||
# OPTIMIZATION = DEFENSIVE (OFF,AGGRESSIVE,ULTRA): Optimization mode: O2, O0, O3 + further options for most files, 03 + further options for all files
|
||||
# OPENMP = TRUE (FALSE): OpenMP multiprocessor support
|
||||
# FFTWROOT = pathinfo:FFTW (will be adjusted by setup_code.py)
|
||||
# ACMLROOT = pathinfo:ACML (will be adjusted by setup_code.py)
|
||||
# ACMLPATH =$(ACMLROOT)/"compilerdir"/lib (...) Path to ACML, choose according to your system
|
||||
# ACMLPATH =$(ACMLROOT/"compilerdir"_mp/lib (...) Path to ACML with multicore support, choose according to your system
|
||||
# "compilerdir" is "intel64" for ifort
|
||||
# PREFIX: specify an arbitrary prefix
|
||||
# SUFFIX: specify an arbitrary suffix
|
||||
# COMPILERNAME = overwrite name of Compiler, e.g. using mpich-g90 instead of ifort
|
||||
# PORTABLE = TRUE (FALSE): decision, if executable is optimized for the machine on which it was built.
|
||||
# OPTIMIZATION = DEFENSIVE (OFF,AGGRESSIVE,ULTRA): Optimization mode: O2, O0, O3 + further options for most files, O3 + further options for all files
|
||||
# OPENMP = TRUE (FALSE): OpenMP multiprocessor support
|
||||
# FFTWROOT = pathinfo:FFTW (will be adjusted by setup_code.py - required in pathinfo)
|
||||
# IKMLROOT = pathinfo:IKML (will be adjusted by setup_code.py if present in pathinfo)
|
||||
# ACMLROOT = pathinfo:ACML (will be adjusted by setup_code.py if present in pathinfo)
|
||||
# LAPACKROOT = pathinfo:LAPACK (will be adjusted by setup_code.py if present in pathinfo)
|
||||
# PREFIX = arbitrary prefix
|
||||
# SUFFIX = arbitrary suffix
|
||||
########################################################################################
|
||||
# Here are some useful debugging switches. Switch on by uncommenting the #SUFFIX line at the end of this section:
|
||||
# information on http://software.intel.com/en-us/articles/determining-root-cause-of-sigsegv-or-sigbus-errors/
|
||||
|
|
@ -50,7 +48,7 @@ DEBUG2 =-check arg_temp_created
|
|||
#check from time to time
|
||||
DEBUG3 =-fp-stack-check -g -traceback -gen-interfaces -warn interfaces
|
||||
|
||||
#should not be done for OpenMP, but set "ulimit -s unlimited" on shell. Problably it helps also to unlimit other limits
|
||||
#should not be done for OpenMP, but set "ulimit -s unlimited" on shell. Probably it helps also to unlimit other limits
|
||||
DEBUG4 =-heap-arrays
|
||||
|
||||
#checks for standard
|
||||
|
|
@ -96,22 +94,16 @@ ifeq "$(PORTABLE)" "FALSE"
|
|||
PORTABLE_SWITCH = -msse3
|
||||
endif
|
||||
|
||||
ifeq "$(PRECISION)" "single"
|
||||
FFTWPREC = f
|
||||
else
|
||||
FFTWPREC =
|
||||
endif
|
||||
|
||||
|
||||
# settings for multicore support
|
||||
ifeq "$(OPENMP)" "ON"
|
||||
OPENMP_FLAG_ifort = -openmp -openmp-report0 -parallel
|
||||
OPENMP_FLAG_gfortran = -fopenmp
|
||||
ACML_ARCH =_mp
|
||||
LIBRARIES += -lfftw3$(FFTWPREC)_threads -lpthread
|
||||
LIBRARIES += -lfftw3_threads -lpthread
|
||||
endif
|
||||
|
||||
LIBRARIES += -lfftw3$(FFTWPREC)
|
||||
LIBRARIES += -lfftw3
|
||||
LIB_DIRS += -L$(FFTWROOT)/lib
|
||||
|
||||
ifdef IKMLROOT
|
||||
|
|
@ -144,31 +136,31 @@ COMPILE = $(OPENMP_FLAG_$(F90)) $(COMPILE_OPTIONS_$(F90)) $(OPTIMIZATION
|
|||
COMPILE_MAXOPTI = $(OPENMP_FLAG_$(F90)) $(COMPILE_OPTIONS_$(F90)) $(OPTIMIZATION_$(MAXOPTI)_$(F90)) -c
|
||||
|
||||
|
||||
ifeq "$(PRECISION)" "single"
|
||||
DAMASK_spectral_single.exe: DAMASK_spectral_single.o CPFEM.a
|
||||
$(PREFIX) $(COMPILERNAME) $(OPENMP_FLAG_$(F90)) -o DAMASK_spectral_single.exe DAMASK_spectral_single.o CPFEM.a \
|
||||
constitutive.a advanced.a basics.a $(LIB_DIRS) $(LIBRARIES)
|
||||
DAMASK_spectral_single.o: DAMASK_spectral_single.f90 CPFEM.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE_MAXOPTI) DAMASK_spectral_single.f90 $(SUFFIX)
|
||||
else
|
||||
|
||||
DAMASK_spectral.exe: DAMASK_spectral.o CPFEM.a
|
||||
$(PREFIX) $(COMPILERNAME) ${OPENMP_FLAG_${F90}} -o DAMASK_spectral.exe DAMASK_spectral.o CPFEM.a \
|
||||
constitutive.a advanced.a basics.a $(LIB_DIRS) $(LIBRARIES)
|
||||
|
||||
DAMASK_spectral.o: DAMASK_spectral.f90 CPFEM.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE_MAXOPTI) DAMASK_spectral.f90 $(SUFFIX)
|
||||
endif
|
||||
|
||||
|
||||
|
||||
CPFEM.a: CPFEM.o
|
||||
ar rc CPFEM.a homogenization.o homogenization_RGC.o homogenization_isostrain.o crystallite.o CPFEM.o constitutive.o
|
||||
|
||||
CPFEM.o: CPFEM.f90 homogenization.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) CPFEM.f90 $(SUFFIX)
|
||||
|
||||
homogenization.o: homogenization.f90 homogenization_isostrain.o homogenization_RGC.o crystallite.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) homogenization.f90 $(SUFFIX)
|
||||
|
||||
homogenization_RGC.o: homogenization_RGC.f90 constitutive.a
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) homogenization_RGC.f90 $(SUFFIX)
|
||||
|
||||
homogenization_isostrain.o: homogenization_isostrain.f90 basics.a advanced.a
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) homogenization_isostrain.f90 $(SUFFIX)
|
||||
|
||||
crystallite.o: crystallite.f90 constitutive.a
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) crystallite.f90 $(SUFFIX)
|
||||
|
||||
|
|
@ -200,44 +192,40 @@ constitutive_phenopowerlaw.o: constitutive_phenopowerlaw.f90 basics.a advanced.a
|
|||
advanced.a: lattice.o
|
||||
ar rc advanced.a FEsolving.o mesh.o material.o lattice.o
|
||||
|
||||
|
||||
lattice.o: lattice.f90 material.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) lattice.f90 $(SUFFIX)
|
||||
|
||||
material.o: material.f90 mesh.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) material.f90 $(SUFFIX)
|
||||
|
||||
mesh.o: mesh.f90 FEsolving.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) mesh.f90 $(SUFFIX)
|
||||
|
||||
FEsolving.o: FEsolving.f90 basics.a
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) FEsolving.f90 $(SUFFIX)
|
||||
|
||||
ifeq "$(PRECISION)" "single"
|
||||
basics.a: debug.o math.o
|
||||
ar rc basics.a debug.o math.o numerics.o IO.o DAMASK_spectral_interface.o prec_single.o
|
||||
else
|
||||
|
||||
|
||||
basics.a: debug.o math.o
|
||||
ar rc basics.a debug.o math.o numerics.o IO.o DAMASK_spectral_interface.o prec.o
|
||||
endif
|
||||
|
||||
debug.o: debug.f90 numerics.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) debug.f90 $(SUFFIX)
|
||||
|
||||
math.o: math.f90 numerics.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) math.f90 $(SUFFIX)
|
||||
|
||||
numerics.o: numerics.f90 IO.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) numerics.f90 $(SUFFIX)
|
||||
|
||||
IO.o: IO.f90 DAMASK_spectral_interface.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) IO.f90 $(SUFFIX)
|
||||
|
||||
ifeq "$(PRECISION)" "single"
|
||||
DAMASK_spectral_interface.o: DAMASK_spectral_interface.f90 prec_single.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) DAMASK_spectral_interface.f90 $(SUFFIX)
|
||||
prec_single.o: prec_single.f90
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) prec_single.f90 $(SUFFIX)
|
||||
else
|
||||
DAMASK_spectral_interface.o: DAMASK_spectral_interface.f90 prec.o
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) DAMASK_spectral_interface.f90 $(SUFFIX)
|
||||
|
||||
prec.o: prec.f90
|
||||
$(PREFIX) $(COMPILERNAME) $(COMPILE) prec.f90 $(SUFFIX)
|
||||
endif
|
||||
|
||||
|
||||
tidy:
|
||||
|
|
|
|||
Loading…
Reference in New Issue