Merge branch '6-debug-replaces-openmp-preprocessor-switch' into 'development'

Resolve "DEBUG replaces OPENMP preprocessor switch"

Closes #6

See merge request damask/DAMASK!16
This commit is contained in:
Philip Eisenlohr 2017-11-07 03:04:22 +01:00
commit e2c66ca75b
8 changed files with 71 additions and 67 deletions

View File

@ -124,6 +124,7 @@ endif ()
# Predefined sets for OPTIMIZATION/OPENMP based on BUILD_TYPE
if ("${CMAKE_BUILD_TYPE}" STREQUAL "DEBUG" OR "${CMAKE_BUILD_TYPE}" STREQUAL "SYNTAXONLY" )
set (DEBUG_FLAGS "${DEBUG_FLAGS} -DDEBUG")
set (PARALLEL "OFF")
set (OPTI "OFF")
elseif ("${CMAKE_BUILD_TYPE}" STREQUAL "RELEASE")

View File

@ -447,8 +447,8 @@ program DAMASK_spectral
min(i*((maxRealOut)/materialpoint_sizeResults),size(materialpoint_results,3))],pLongInt)
call MPI_file_write(resUnit, &
reshape(materialpoint_results(:,:,outputIndex(1):outputIndex(2)), &
[(outputIndex(2)-outputIndex(1)+1)*materialpoint_sizeResults]), &
(outputIndex(2)-outputIndex(1)+1)*materialpoint_sizeResults, &
[(outputIndex(2)-outputIndex(1)+1)*int(materialpoint_sizeResults,pLongInt)]), &
(outputIndex(2)-outputIndex(1)+1)*int(materialpoint_sizeResults,pLongInt), &
MPI_DOUBLE, MPI_STATUS_IGNORE, ierr)
if (ierr /= 0_pInt) call IO_error(error_ID=894_pInt, ext_msg='MPI_file_write')
enddo
@ -645,8 +645,8 @@ program DAMASK_spectral
outputIndex=int([(i-1_pInt)*((maxRealOut)/materialpoint_sizeResults)+1_pInt, &
min(i*((maxRealOut)/materialpoint_sizeResults),size(materialpoint_results,3))],pLongInt)
call MPI_file_write(resUnit,reshape(materialpoint_results(:,:,outputIndex(1):outputIndex(2)),&
[(outputIndex(2)-outputIndex(1)+1)*materialpoint_sizeResults]), &
(outputIndex(2)-outputIndex(1)+1)*materialpoint_sizeResults,&
[(outputIndex(2)-outputIndex(1)+1)*int(materialpoint_sizeResults,pLongInt)]), &
(outputIndex(2)-outputIndex(1)+1)*int(materialpoint_sizeResults,pLongInt),&
MPI_DOUBLE, MPI_STATUS_IGNORE, ierr)
if(ierr /=0_pInt) call IO_error(894_pInt, ext_msg='MPI_file_write')
enddo

View File

@ -554,7 +554,6 @@ subroutine crystallite_stressAndItsTangent(updateJaco)
FEsolving_execIP
use mesh, only: &
mesh_element, &
mesh_NcpElems, &
mesh_maxNips, &
mesh_ipNeighborhood, &
FE_NipNeighbors, &
@ -565,8 +564,7 @@ subroutine crystallite_stressAndItsTangent(updateJaco)
plasticState, &
sourceState, &
phase_Nsources, &
phaseAt, phasememberAt, &
homogenization_maxNgrains
phaseAt, phasememberAt
use constitutive, only: &
constitutive_TandItsTangent, &
constitutive_LpAndItsTangent, &
@ -794,7 +792,7 @@ subroutine crystallite_stressAndItsTangent(updateJaco)
if (.not. crystallite_localPlasticity(1,neighboring_i,neighboring_e) &
.and. .not. crystallite_converged(1,neighboring_i,neighboring_e)) then
crystallite_neighborEnforcedCutback(i,e) = .true.
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a12,i5,1x,i2,a,i5,1x,i2)') '<< CRYST >> ', neighboring_e,neighboring_i, &
' enforced cutback at ',e,i
@ -829,7 +827,7 @@ subroutine crystallite_stressAndItsTangent(updateJaco)
if (.not. crystallite_localPlasticity(1,neighboring_i,neighboring_e) &
.and. .not. crystallite_converged(1,neighboring_i,neighboring_e)) then
crystallite_syncSubFrac(i,e) = .true.
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt) &
write(6,'(a12,i5,1x,i2,a,i5,1x,i2)') '<< CRYST >> ',neighboring_e,neighboring_i, &
' enforced time synchronization at ',e,i
@ -937,7 +935,7 @@ subroutine crystallite_stressAndItsTangent(updateJaco)
crystallite_todo(c,i,e) = .true.
endif
!$OMP FLUSH(crystallite_todo)
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite),debug_levelBasic) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. c == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) &
@ -987,7 +985,7 @@ subroutine crystallite_stressAndItsTangent(updateJaco)
! cant restore dotState here, since not yet calculated in first cutback after initialization
crystallite_todo(c,i,e) = crystallite_subStep(c,i,e) > subStepMinCryst ! still on track or already done (beyond repair)
!$OMP FLUSH(crystallite_todo)
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite),debug_levelBasic) /= 0_pInt) then
if (crystallite_todo(c,i,e)) then
write(6,'(a,f12.8,a,i8,1x,i2,1x,i3,/)') '<< CRYST >> cutback step in crystallite_stressAndItsTangent &
@ -1393,7 +1391,7 @@ subroutine crystallite_integrateStateRK4()
* crystallite_subdt(g,i,e) * timeStepFraction(n)
enddo
#ifndef _OPENMP
#ifdef DEBUG
if (n == 4 &
.and. iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
@ -1784,7 +1782,7 @@ subroutine crystallite_integrateStateRKCK45()
! --- dot state and RK dot state---
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt) &
write(6,'(a,1x,i1)') '<< CRYST >> Runge--Kutta step',stage+1_pInt
#endif
@ -1933,7 +1931,7 @@ subroutine crystallite_integrateStateRKCK45()
sourceState(p)%p(mySource)%aTolState(1:mySizeSourceDotState))
enddo
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt&
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g)&
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
@ -2317,7 +2315,7 @@ subroutine crystallite_integrateStateAdaptiveEuler()
!$OMP FLUSH(relPlasticStateResiduum)
!$OMP FLUSH(relSourceStateResiduum)
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g)&
@ -2513,7 +2511,7 @@ eIter = FEsolving_execElem(1:2)
* crystallite_subdt(g,i,e)
enddo
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
@ -2962,7 +2960,7 @@ subroutine crystallite_integrateStateFPI()
* (1.0_pReal - sourceStateDamper)
enddo
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i .and. g == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
@ -3134,7 +3132,7 @@ logical function crystallite_stateJump(ipc,ip,el)
sourceState(p)%p(mySource)%deltaState(1:mySizeSourceDeltaState,c)
enddo
#ifndef _OPENMP
#ifdef DEBUG
if (any(dNeq0(plasticState(p)%deltaState(1:mySizePlasticDeltaState,c))) &
.and. iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((el == debug_e .and. ip == debug_i .and. ipc == debug_g) &
@ -3309,7 +3307,7 @@ logical function crystallite_integrateStress(&
!* be pessimistic
crystallite_integrateStress = .false.
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((el == debug_e .and. ip == debug_i .and. ipc == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) &
@ -3342,9 +3340,9 @@ logical function crystallite_integrateStress(&
invFp_current = math_inv33(Fp_current)
failedInversionFp: if (all(dEq0(invFp_current))) then
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3)') '<< CRYST >> integrateStress failed on inversion of Fp_current at el (elFE) ip g ',&
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3)') '<< CRYST >> integrateStress failed on inversion of Fp_current at el (elFE) ip ipc ',&
el,'(',mesh_element(1,el),')',ip,ipc
if (iand(debug_level(debug_crystallite), debug_levelExtensive) > 0_pInt) &
write(6,'(/,a,/,3(12x,3(f12.7,1x)/))') '<< CRYST >> Fp_current',math_transpose33(Fp_current(1:3,1:3))
@ -3358,7 +3356,7 @@ logical function crystallite_integrateStress(&
invFi_current = math_inv33(Fi_current)
failedInversionFi: if (all(dEq0(invFi_current))) then
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3)') '<< CRYST >> integrateStress failed on inversion of Fi_current at el (elFE) ip ipc ',&
el,'(',mesh_element(1,el),')',ip,ipc
@ -3379,10 +3377,10 @@ logical function crystallite_integrateStress(&
LiLoop: do
NiterationStressLi = NiterationStressLi + 1_pInt
IloopsExeced: if (NiterationStressLi > nStress) then
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) &
write(6,'(a,i3,a,i8,1x,a,i8,a,1x,i2,1x,i3,/)') '<< CRYST >> integrateStress reached inelastic loop limit',nStress, &
' at el (elFE) ip ipc ', el,mesh_element(1,el),ip,ipc
' at el (elFE) ip ipc ', el,'(',mesh_element(1,el),')',ip,ipc
#endif
return
endif IloopsExeced
@ -3400,7 +3398,7 @@ logical function crystallite_integrateStress(&
LpLoop: do ! inner stress integration loop for consistency with Fi
NiterationStressLp = NiterationStressLp + 1_pInt
loopsExeced: if (NiterationStressLp > nStress) then
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) &
write(6,'(a,i3,a,i8,1x,a,i8,a,1x,i2,1x,i3,/)') '<< CRYST >> integrateStress reached loop limit',nStress, &
' at el (elFE) ip ipc ', el,mesh_element(1,el),ip,ipc
@ -3433,7 +3431,7 @@ logical function crystallite_integrateStress(&
!$OMP END CRITICAL (debugTimingLpTangent)
endif
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((el == debug_e .and. ip == debug_i .and. ipc == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
@ -3451,10 +3449,10 @@ logical function crystallite_integrateStress(&
residuumLp = Lpguess - Lp_constitutive
if (any(IEEE_is_NaN(residuumLp))) then ! NaN in residuum...
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) &
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3,a,i3,a)') '<< CRYST >> integrateStress encountered NaN at el (elFE) ip ipc ', &
el,mesh_element(1,el),ip,ipc, &
el,'(',mesh_element(1,el),')',ip,ipc, &
' ; iteration ', NiterationStressLp,&
' >> returning..!'
#endif
@ -3486,10 +3484,10 @@ logical function crystallite_integrateStress(&
work = math_plain33to9(residuumLp)
call dgesv(9,1,dRLp_dLp2,9,ipiv,work,9,ierr) ! solve dRLp/dLp * delta Lp = -res for delta Lp
if (ierr /= 0_pInt) then
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3,a,i3)') '<< CRYST >> integrateStress failed on dR/dLp inversion at el ip ipc ', &
el,mesh_element(1,el),ip,ipc
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3)') '<< CRYST >> integrateStress failed on dR/dLp inversion at el (elFE) ip ipc ', &
el,'(',mesh_element(1,el),')',ip,ipc
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((el == debug_e .and. ip == debug_i .and. ipc == debug_g)&
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
@ -3527,7 +3525,7 @@ logical function crystallite_integrateStress(&
call constitutive_LiAndItsTangent(Li_constitutive, dLi_dT3333, dLi_dFi3333, &
Tstar_v, Fi_new, ipc, ip, el)
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((el == debug_e .and. ip == debug_i .and. ipc == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
@ -3575,10 +3573,10 @@ logical function crystallite_integrateStress(&
work = math_plain33to9(residuumLi)
call dgesv(9,1,dRLi_dLi,9,ipiv,work,9,ierr) ! solve dRLi/dLp * delta Li = -res for delta Li
if (ierr /= 0_pInt) then
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3,a,i3)') '<< CRYST >> integrateStress failed on dR/dLi inversion at el ip ipc ', &
el,mesh_element(1,el),ip,ipc
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3)') '<< CRYST >> integrateStress failed on dR/dLi inversion at el (elFE) ip ipc ', &
el,'(',mesh_element(1,el),')',ip,ipc
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((el == debug_e .and. ip == debug_i .and. ipc == debug_g)&
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then
@ -3615,10 +3613,10 @@ logical function crystallite_integrateStress(&
invFp_new = invFp_new / math_det33(invFp_new)**(1.0_pReal/3.0_pReal) ! regularize by det
Fp_new = math_inv33(invFp_new)
failedInversionInvFp: if (all(dEq0(Fp_new))) then
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite), debug_levelBasic) /= 0_pInt) then
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3,a,i3)') '<< CRYST >> integrateStress failed on invFp_new inversion at el ip ipc ',&
el,mesh_element(1,el),ip,ipc, ' ; iteration ', NiterationStressLp
write(6,'(a,i8,1x,a,i8,a,1x,i2,1x,i3,a,i3)') '<< CRYST >> integrateStress failed on invFp_new inversion at el (elFE) ip ipc ',&
el,'(',mesh_element(1,el),')',ip,ipc, ' ; iteration ', NiterationStressLp
if (iand(debug_level(debug_crystallite), debug_levelExtensive) /= 0_pInt &
.and. ((el == debug_e .and. ip == debug_i .and. ipc == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) &
@ -3649,7 +3647,7 @@ logical function crystallite_integrateStress(&
!* set return flag to true
crystallite_integrateStress = .true.
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_crystallite),debug_levelExtensive) /= 0_pInt &
.and. ((el == debug_e .and. ip == debug_i .and. ipc == debug_g) &
.or. .not. iand(debug_level(debug_crystallite), debug_levelSelective) /= 0_pInt)) then

View File

@ -542,6 +542,7 @@ subroutine materialpoint_stressAndItsTangent(updateJaco,dt)
debug_level, &
debug_homogenization, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_e, &
debug_i, &
@ -638,8 +639,8 @@ subroutine materialpoint_stressAndItsTangent(updateJaco,dt)
IpLooping1: do i = FEsolving_execIP(1,e),FEsolving_execIP(2,e)
converged: if ( materialpoint_converged(i,e) ) then
#ifndef _OPENMP
if (iand(debug_level(debug_homogenization), debug_levelBasic) /= 0_pInt &
#ifdef DEBUG
if (iand(debug_level(debug_homogenization), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i) &
.or. .not. iand(debug_level(debug_homogenization),debug_levelSelective) /= 0_pInt)) then
write(6,'(a,1x,f12.8,1x,a,1x,f12.8,1x,a,i8,1x,i2/)') '<< HOMOG >> winding forward from', &
@ -741,8 +742,8 @@ subroutine materialpoint_stressAndItsTangent(updateJaco,dt)
materialpoint_subStep(i,e) = subStepSizeHomog * materialpoint_subStep(i,e) ! crystallite had severe trouble, so do a significant cutback
!$OMP FLUSH(materialpoint_subStep)
#ifndef _OPENMP
if (iand(debug_level(debug_homogenization), debug_levelBasic) /= 0_pInt &
#ifdef DEBUG
if (iand(debug_level(debug_homogenization), debug_levelExtensive) /= 0_pInt &
.and. ((e == debug_e .and. i == debug_i) &
.or. .not. iand(debug_level(debug_homogenization), debug_levelSelective) /= 0_pInt)) then
write(6,'(a,1x,f12.8,a,i8,1x,i2/)') &

View File

@ -519,6 +519,8 @@ subroutine mesh_init(ip,el)
integer(pInt) :: j
logical :: myDebug
external :: MPI_comm_size
write(6,'(/,a)') ' <<<+- mesh init -+>>>'
write(6,'(a15,a)') ' Current time: ',IO_timeStamp()
#include "compilation_info.f90"

View File

@ -1823,14 +1823,14 @@ plasticState(ph)%state(iRhoF(1:ns,instance),of) = rhoForest
plasticState(ph)%state(iTauF(1:ns,instance),of) = tauThreshold
plasticState(ph)%state(iTauB(1:ns,instance),of) = tauBack
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0_pInt &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt)) then
write(6,'(/,a,i8,1x,i2,1x,i1,/)') '<< CONST >> nonlocal_microstructure at el ip ',el,ip
write(6,'(a,/,12x,12(e10.3,1x))') '<< CONST >> rhoForest', rhoForest
write(6,'(a,/,12x,12(f10.5,1x))') '<< CONST >> tauThreshold / MPa', tauThreshold/1e6
write(6,'(a,/,12x,12(f10.5,1x),/)') '<< CONST >> tauBack / MPa', tauBack/1e6
write(6,'(a,/,12x,12(f10.5,1x))') '<< CONST >> tauThreshold / MPa', tauThreshold*1e-6
write(6,'(a,/,12x,12(f10.5,1x),/)') '<< CONST >> tauBack / MPa', tauBack*1e-6
endif
#endif
@ -1978,15 +1978,15 @@ if (Temperature > 0.0_pReal) then
endif
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0_pInt &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt)) then
write(6,'(/,a,i8,1x,i2,1x,i1,/)') '<< CONST >> nonlocal_kinetics at el ip',el,ip
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> tauThreshold / MPa', tauThreshold / 1e6_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> tau / MPa', tau / 1e6_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> tauNS / MPa', tauNS / 1e6_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> v / 1e-3m/s', v * 1e3
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> tauThreshold / MPa', tauThreshold * 1e-6_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> tau / MPa', tau * 1e-6_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> tauNS / MPa', tauNS * 1e-6_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> v / mm/s', v * 1e3
write(6,'(a,/,12x,12(e12.5,1x))') '<< CONST >> dv_dtau', dv_dtau
write(6,'(a,/,12x,12(e12.5,1x))') '<< CONST >> dv_dtauNS', dv_dtauNS
endif
@ -2176,12 +2176,12 @@ enddo
dLp_dTstar99 = math_Plain3333to99(dLp_dTstar3333)
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0_pInt &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt )) then
write(6,'(/,a,i8,1x,i2,1x,i1,/)') '<< CONST >> nonlocal_LpandItsTangent at el ip',el,ip
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> gdot total / 1e-3',gdotTotal*1e3_pReal
write(6,'(a,/,12x,12(f12.5,1x))') '<< CONST >> gdot total',gdotTotal
write(6,'(a,/,3(12x,3(f12.7,1x),/))') '<< CONST >> Lp',transpose(Lp)
endif
#endif
@ -2248,7 +2248,7 @@ real(pReal), dimension(totalNslip(phase_plasticityInstance(material_phase(1,ip,e
dUpperOld, & ! old maximum stable dipole distance for edges and screws
deltaDUpper ! change in maximum stable dipole distance for edges and screws
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelBasic) /= 0_pInt &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt)) &
@ -2361,7 +2361,7 @@ forall (s = 1:ns, c = 1_pInt:2_pInt) &
plasticState(ph)%deltaState(iRhoD(s,c,instance),of) = deltaRho(s,c+8_pInt)
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0_pInt &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt )) then
@ -2522,11 +2522,11 @@ logical considerEnteringFlux, &
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelBasic) /= 0_pInt &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt)) &
write(6,'(/,a,i8,1x,i2,1x,i1,/)') '<< CONST >> nonlocal_dotState at el ip ',el,ip
write(6,'(/,a,i8,1x,i2,/)') '<< CONST >> nonlocal_dotState at el ip ',el,ip
#endif
ph = material_phase(1_pInt,ip,el)
@ -2589,7 +2589,7 @@ endif
forall (t = 1_pInt:4_pInt) &
gdot(1_pInt:ns,t) = rhoSgl(1_pInt:ns,t) * burgers(1:ns,instance) * v(1:ns,t)
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelBasic) /= 0_pInt &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt )) then
@ -2663,7 +2663,7 @@ else
/ burgers(s,instance) * sqrt(rhoForest(s)) / lambda0(s,instance)
endif
enddo
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0_pInt &
.and. ((debug_e == el .and. debug_i == ip)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt )) &
@ -2690,7 +2690,7 @@ if (.not. phase_localPlasticity(material_phase(1_pInt,ip,el))) then
if (any( abs(gdot) > 0.0_pReal & ! any active slip system ...
.and. CFLfactor(instance) * abs(v) * timestep &
> mesh_ipVolume(ip,el) / maxval(mesh_ipArea(:,ip,el)))) then ! ...with velocity above critical value (we use the reference volume and area for simplicity here)
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0_pInt) then
write(6,'(a,i5,a,i2)') '<< CONST >> CFL condition not fullfilled at el ',el,' ip ',ip
write(6,'(a,e10.3,a,e10.3)') '<< CONST >> velocity is at ', &
@ -2952,7 +2952,7 @@ if (numerics_integrationMode == 1_pInt) then
endif
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0_pInt &
.and. ((debug_e == el .and. debug_i == ip .and. debug_g == 1_pInt)&
.or. .not. iand(debug_level(debug_constitutive),debug_levelSelective) /= 0_pInt )) then
@ -2978,7 +2978,7 @@ endif
if ( any(rhoSglOriginal(1:ns,1:4) + rhoDot(1:ns,1:4) * timestep < -aTolRho(instance)) &
.or. any(rhoDipOriginal(1:ns,1:2) + rhoDot(1:ns,9:10) * timestep < -aTolRho(instance))) then
#ifndef _OPENMP
#ifdef DEBUG
if (iand(debug_level(debug_constitutive),debug_levelExtensive) /= 0_pInt) then
write(6,'(a,i5,a,i2)') '<< CONST >> evolution rate leads to negative density at el ',el,' ip ',ip
write(6,'(a)') '<< CONST >> enforcing cutback !!!'

View File

@ -310,7 +310,6 @@ subroutine BasicPETSC_formResidual(in,x_scal,f_scal,dummy,ierr)
debug_spectral, &
debug_spectralRotation
use spectral_utilities, only: &
wgt, &
tensorField_real, &
utilities_FFTtensorForward, &
utilities_fourierGammaConvolution, &

View File

@ -970,6 +970,9 @@ subroutine utilities_constitutiveResponse(F_lastInc,F,timeinc, &
real(pReal), dimension(3,3,3,3) :: max_dPdF, min_dPdF
real(pReal) :: max_dPdF_norm, min_dPdF_norm, defgradDetMin, defgradDetMax, defgradDet
external :: &
MPI_Allreduce
write(6,'(/,a)') ' ... evaluating constitutive response ......................................'
flush(6)
age = .False.