Introduce debug module, contains distributions of nCutback, nStressLoop, and nStateLoop

trunk/CPFEM.f90

@@ -39,7 +39,7 @@
 !*********************************************************
  SUBROUTINE CPFEM_init()
 !
- use prec, only: pReal,pInt
+ use prec
  use math, only: math_EulertoR, math_I3, math_identity2nd
  use mesh
  use constitutive
@@ -106,6 +106,7 @@
                           CPFEM_en, CPFEM_in, CPFEM_stress, CPFEM_jaco, CPFEM_ngens)
 !
  use prec, only: pReal,pInt
+ use debug
  use math, only: math_init, invnrmMandel
  use mesh, only: mesh_init,mesh_FEasCP, mesh_NcpElems, FE_Nips, FE_mapElemtype, mesh_element
  use crystal, only: crystal_Init
@@ -148,6 +149,9 @@ if(mod(CPFEM_cn,2)==0) then
         endif
         CPFEM_cycle_old=CPFEM_cn
 ! this shall be done in a parallel loop in the future
+        debug_cutbackDistribution = 0_pInt
+        debug_stressLoopDistribution = 0_pInt
+        debug_stateLoopDistribution = 0_pInt
         do e=1,mesh_NcpElems
             do i=1,FE_Nips(FE_mapElemtype(mesh_element(2,e)))
                 call CPFEM_stressIP(CPFEM_cn, CPFEM_dt, i, e)
@@ -185,6 +189,7 @@ if(mod(CPFEM_cn,2)==0) then
      cp_en)           ! Element number
 
  use prec, only: pReal,pInt,ijaco,nCutback
+ use debug
  use math, only: math_pDecomposition,math_RtoEuler, inDeg
  use IO,   only: IO_error
  use mesh, only: mesh_element
@@ -240,7 +245,10 @@ if(mod(CPFEM_cn,2)==0) then
                                   dt,cp_en,CPFEM_in,grain,updateJaco .and. t==CPFEM_dt,&
                                   Fg(:,:,i_now),Fg(:,:,i_then),Fp(:,:,i_now),state(:,i_now))
      if (msg == 'ok') then             ! solution converged
-       if (t == CPFEM_dt) exit         ! reached final "then"
+       if (t == CPFEM_dt) then
+	     debug_cutbackDistribution(i) = debug_cutbackDistribution(i)+1
+	     exit         ! reached final "then"
+	   endif
      else                              ! solution not found
        i = i+1_pInt                    ! inc cutback counter
 !       write(6,*) 'ncut:', i
@@ -378,6 +386,7 @@ if(mod(CPFEM_cn,2)==0) then
      state_old)         ! former microstructure
 
  use prec
+ use debug
  use constitutive, only: constitutive_Nstatevars,&
                          constitutive_homogenizedC,constitutive_dotState,constitutive_LpAndItsTangent,&
  						 constitutive_Microstructure
@@ -419,6 +428,7 @@ state: do                ! outer iteration: state
          iState = iState+1
          if (iState > nState) then
            msg = 'limit state iteration'
+		   debug_stateLoopDistribution(nState) = debug_stateLoopDistribution(nState)+1
            return
          endif
 		 call constitutive_Microstructure(state_new,CPFEM_Temperature(CPFEM_in,cp_en),grain,CPFEM_in,cp_en)
@@ -429,6 +439,7 @@ stress:  do              ! inner iteration: stress
            iStress = iStress+1
            if (iStress > nStress) then      ! too many loops required
              msg = 'limit stress iteration'
+		     debug_stressLoopDistribution(nStress) = debug_stateLoopDistribution(nStress)+1
              return
            endif
            p_hydro=(Tstar_v(1)+Tstar_v(2)+Tstar_v(3))/3.0_pReal
@@ -474,7 +485,7 @@ stress:  do              ! inner iteration: stress
            enddo
            if (failed) then
              msg = 'regularization Jacobi'
-             return
+			 return
            endif
            dTstar_v = matmul(invJacobi,Rstress)  ! correction to Tstar
            Rstress_old=Rstress
@@ -482,9 +493,10 @@ stress:  do              ! inner iteration: stress
 		
 
     enddo stress
+    debug_stressLoopDistribution(iStress) = debug_stressLoopDistribution(iStress)+1
     Tstar_v = 0.5_pReal*matmul(C_66,math_Mandel33to6(matmul(transpose(B),AB)-math_I3))
     !if ((printer==1_pInt).AND.(CPFEM_in==1_pInt).AND.(cp_en==1_pInt)) then
-	!write(6,'(A10, 12ES12.3)') 'state_new', state_new
+	!write(6,'(A10, 24ES12.3)') 'state_new', state_new
 	!write(6,'(A10, 6ES12.3)') 'Tstar_v', Tstar_v
 	!endif
     dstate = dt*constitutive_dotState(Tstar_v,state_new,CPFEM_Temperature(CPFEM_in,cp_en),grain,CPFEM_in,cp_en) ! evolution of microstructure
@@ -497,6 +509,7 @@ stress:  do              ! inner iteration: stress
     if (maxval(abs(RstateS)) < reltol_State) exit state
 
  enddo state
+ debug_strateLoopDistribution(iState) = debug_stateLoopDistribution(iState)+1
 
  invFp_new = matmul(invFp_old,B)
  call math_invert3x3(invFp_new,Fp_new,det,failed)
@@ -507,6 +520,7 @@ stress:  do              ! inner iteration: stress
  Fp_new = Fp_new*det**(1.0_pReal/3.0_pReal) ! det = det(InvFp_new) !!
  Fe_new = matmul(Fg_new,invFp_new)
  return
+ 
  END SUBROUTINE
 
 

trunk/IO.f90

@@ -558,7 +558,8 @@
 !********************************************************************
  SUBROUTINE IO_error(ID)
 
- use prec, only: pInt
+ use prec, only: pInt
+ use debug
  implicit none
 
  integer(pInt) ID
@@ -581,7 +582,7 @@
  case (500)
    msg='Unknown lattice type specified'
  case (600)
-   msg='Stress iteration did not converge'
+   msg='Convergence not reached'
  case (700)
    msg='Singular matrix in stress iteration'
  case default
@@ -590,7 +591,10 @@
  
  write(6,*) 'MPIE Material Routine Ver. 0.0 by the coding team'
  write(6,*)
- write(6,*) msg
+ write(6,*) msg
+ write(6,*)
+ call debug_info()
+
  call flush(6)
  call quit(9000+ID)
 ! ABAQUS returns in some cases

trunk/debug.f90

@@ -0,0 +1,46 @@
+
+!##############################################################
+ MODULE debug
+!##############################################################
+ use prec
+
+ implicit none
+ integer(pInt), dimension(nCutback) :: debug_cutbackDistribution
+ integer(pInt), dimension(nStress) :: debug_stressLoopDistribution
+ integer(pInt), dimension(nState) :: debug_stateLoopDistribution
+
+ CONTAINS
+
+
+!********************************************************************
+! write debug statements to standard out
+!********************************************************************
+ SUBROUTINE debug_info()
+
+ use prec
+ implicit none
+
+ integer(pInt) i
+
+ write(6,*) 'DEBUG Info'
+ write(6,*)	'distribution_cutback :'
+ do i=1,nCutback
+   if (debug_cutbackDistribution(i) > 0) write(6,*) i,debug_cutbackDistribution(i)
+ enddo
+ write(6,*)
+ 
+ write(6,*)	'distribution_stressLoop :'
+ do i=1,nStress
+   if (debug_stressLoopDistribution(i) > 0) write(6,*) i,debug_stressLoopDistribution(i)
+ enddo
+ write(6,*)
+ 
+ write(6,*)	'distribution_stateLoop :'
+ do i=1,nState
+   if (debug_stateLoopDistribution(i) > 0) write(6,*) i,debug_stateLoopDistribution(i)
+ enddo
+ write(6,*)
+
+ END SUBROUTINE
+ 
+ END MODULE debug

trunk/mpie_cpfem_marc2005r3.f90

@@ -28,6 +28,7 @@
 !********************************************************************
 !
  include "prec.f90"
+ include "debug.f90"
  include "math.f90"
  include "IO.f90"
  include "mesh.f90"

trunk/mpie_cpfem_marc2007r1.f90

@@ -27,7 +27,8 @@
 !             - creeps: timinc
 !********************************************************************
 !
- include "prec.f90"
+ include "prec.f90"
+ include "debug.f90"
  include "math.f90"
  include "IO.f90"
  include "mesh.f90"

trunk/prec.f90

@@ -17,11 +17,11 @@
 !    *** Perturbation of strain array for numerical calculation of FEM Jacobi matrix ***
  real(pReal), parameter :: pert_e=1.0e-5_pReal  
 !    *** Maximum number of iterations in outer (state variables) loop ***
- integer(pInt), parameter :: nState    = 50_pInt
+ integer(pInt), parameter :: nState    = 500_pInt
 !    *** Convergence criteria for outer (state variables) loop ***
  real(pReal),   parameter :: reltol_State = 1.0e-6_pReal
 !    *** Maximum number of iterations in inner (stress) loop ***
- integer(pInt), parameter :: nStress    = 500_pInt
+ integer(pInt), parameter :: nStress    = 1000_pInt
 !    *** Convergence criteria for inner (stress) loop ***
  real(pReal),   parameter :: reltol_Stress = 1.0e-6_pReal   
 !    *** Convergence criteria for inner (stress) loop ***