223031012
/
DAMASK_EICMD
mirror of https://github.com/achalhp/DAMASK_EICMD.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

changed makefile: material subroutines are now compiled using openmp, enabled linux threads for fftw3 (also did some slight changes to enable that in the fortran source code) 

renamed mpie_spectral2.f90 to mpie_spectral2d.f90 (testing file, not properly working at the moment)
changed file extension and variable names in mpie_spectral.f90 and mpie_spectral_interface.f90 from "mesh" to "geom". Removed direct output from mpie_spectral.f90, all output is now base on materialpoint_results(:,1,:)
This commit is contained in:
Martin Diehl 2011-01-07 12:56:45 +00:00
parent 9447330ab0
commit 71fb5eedf2
4 changed files with 722 additions and 170 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

55
code/makefile
View File

@ -1,22 +1,29 @@
cpspectral.out: mpie_spectral.o CPFEM.a
ifort -o cpspectral.out mpie_spectral.o CPFEM.a libfftw3_threads.a libfftw3.a constitutive.a advanced.a basics.a -lpthread
# Makefile to compile the Material subroutine for BVP solution using spectral method.
#
# Uses openmp to parallelise the material subroutines (set number of cores with "export MPIE_NUM_THREADS=n" to n)
# Uses linux threads to parallelise fftw3 (should also be possible with openmp)
# Besides of the f90 files written at MPIE, the two library files of fftw3 "libfftw3_threads.a" "libfftw3.a" are also needed
# Install fftw3 (v3.2.2 is tested) with "./configure --enable-threads" and "make", "make install" is not needed
# as long as the two library files are copied to the source code directory.
cpspectral.out: mpie_spectral.o CPFEM.a
ifort -openmp -o cpspectral.out mpie_spectral.o CPFEM.a libfftw3_threads.a libfftw3.a constitutive.a advanced.a basics.a -lpthread
mpie_spectral.o: mpie_spectral.f90 CPFEM.o
ifort -c -O3 -heap-arrays 500000000 mpie_spectral.f90
ifort -openmp -c -O3 -heap-arrays 500000000 mpie_spectral.f90
CPFEM.a: CPFEM.o
ar rc CPFEM.a homogenization.o homogenization_RGC.o homogenization_isostrain.o crystallite.o CPFEM.o constitutive.o
CPFEM.o: CPFEM.f90 homogenization.o
ifort -c -O3 -heap-arrays 500000000 CPFEM.f90
ifort -openmp -c -O3 -heap-arrays 500000000 CPFEM.f90
homogenization.o: homogenization.f90 homogenization_isostrain.o homogenization_RGC.o crystallite.o
ifort -c -O3 -heap-arrays 500000000 homogenization.f90
ifort -openmp -c -O3 -heap-arrays 500000000 homogenization.f90
homogenization_RGC.o: homogenization_RGC.f90 constitutive.a
ifort -c -O3 -heap-arrays 500000000 homogenization_RGC.f90
ifort -openmp -c -O3 -heap-arrays 500000000 homogenization_RGC.f90
homogenization_isostrain.o: homogenization_isostrain.f90 basics.a advanced.a
ifort -c -O3 -heap-arrays 500000000 homogenization_isostrain.f90
ifort -openmp -c -O3 -heap-arrays 500000000 homogenization_isostrain.f90
crystallite.o: crystallite.f90 constitutive.a
ifort -c -O3 -heap-arrays 500000000 crystallite.f90
ifort -openmp -c -O3 -heap-arrays 500000000 crystallite.f90
@ -24,22 +31,22 @@ constitutive.a: constitutive.o
ar rc constitutive.a constitutive.o constitutive_titanmod.o constitutive_nonlocal.o constitutive_dislotwin.o constitutive_j2.o constitutive_phenopowerlaw.o basics.a advanced.a
constitutive.o: constitutive.f90 constitutive_titanmod.o constitutive_nonlocal.o constitutive_dislotwin.o constitutive_j2.o constitutive_phenopowerlaw.o
ifort -c -O3 -heap-arrays 500000000 constitutive.f90
ifort -openmp -c -O3 -heap-arrays 500000000 constitutive.f90
constitutive_titanmod.o: constitutive_titanmod.f90 basics.a advanced.a
ifort -c -O3 -heap-arrays 500000000 constitutive_titanmod.f90
ifort -openmp -c -O3 -heap-arrays 500000000 constitutive_titanmod.f90
constitutive_nonlocal.o: constitutive_nonlocal.f90 basics.a advanced.a
ifort -c -O3 -heap-arrays 500000000 constitutive_nonlocal.f90
ifort -openmp -c -O3 -heap-arrays 500000000 constitutive_nonlocal.f90
constitutive_dislotwin.o: constitutive_dislotwin.f90 basics.a advanced.a
ifort -c -O3 -heap-arrays 500000000 constitutive_dislotwin.f90
ifort -openmp -c -O3 -heap-arrays 500000000 constitutive_dislotwin.f90
constitutive_j2.o: constitutive_j2.f90 basics.a advanced.a
ifort -c -O3 -heap-arrays 500000000 constitutive_j2.f90
ifort -openmp -c -O3 -heap-arrays 500000000 constitutive_j2.f90
constitutive_phenopowerlaw.o: constitutive_phenopowerlaw.f90 basics.a advanced.a
ifort -c -O3 -heap-arrays 500000000 constitutive_phenopowerlaw.f90
ifort -openmp -c -O3 -heap-arrays 500000000 constitutive_phenopowerlaw.f90
@ -47,13 +54,13 @@ advanced.a: lattice.o
ar rc advanced.a FEsolving.o mesh.o material.o lattice.o
lattice.o: lattice.f90 material.o
ifort -c -O3 -heap-arrays 500000000 lattice.f90
ifort -openmp -c -O3 -heap-arrays 500000000 lattice.f90
material.o: material.f90 mesh.o
ifort -c -O3 -heap-arrays 500000000 material.f90
ifort -openmp -c -O3 -heap-arrays 500000000 material.f90
mesh.o: mesh.f90 FEsolving.o
ifort -c -O3 -heap-arrays 500000000 mesh.f90
ifort -openmp -c -O3 -heap-arrays 500000000 mesh.f90
FEsolving.o: FEsolving.f90 basics.a
ifort -c -O3 -heap-arrays 500000000 FEsolving.f90
ifort -openmp -c -O3 -heap-arrays 500000000 FEsolving.f90
@ -61,16 +68,16 @@ basics.a: debug.o math.o
ar rc basics.a debug.o math.o numerics.o IO.o mpie_spectral_interface.o prec.o
debug.o: debug.f90 numerics.o
ifort -c -O3 debug.f90
ifort -openmp -c -O3 debug.f90
math.o: math.f90 numerics.o
ifort -c -O3 math.f90
ifort -openmp -c -O3 math.f90
numerics.o: numerics.f90 IO.o
ifort -c -O3 numerics.f90
ifort -openmp -c -O3 numerics.f90
IO.o: IO.f90 mpie_spectral_interface.o
ifort -c -O3 IO.f90
ifort -openmp -c -O3 IO.f90
mpie_spectral_interface.o: mpie_spectral_interface.f90 prec.o
ifort -c -O3 mpie_spectral_interface.f90
ifort -openmp -c -O3 mpie_spectral_interface.f90
prec.o: prec.f90
ifort -c -O3 prec.f90
ifort -openmp -c -O3 prec.f90

223
code/mpie_spectral.f90
View File

@ -15,7 +15,7 @@
!
!********************************************************************
! Usage:
! - start program with mpie_spectral PathToMeshFile/NameOfMesh.mesh
! - start program with mpie_spectral PathToGeomFile/NameOfGeom.geom
! PathToLoadFile/NameOfLoadFile.load
! - PathToLoadFile will be the working directory
! - make sure the file "material.config" exists in the working
@ -28,19 +28,20 @@ program mpie_spectral
use prec, only: pInt, pReal
use IO
use math
use CPFEM, only: CPFEM_general
use numerics, only: relevantStrain, rTol_crystalliteStress !ToDo: change to really needed variables
use CPFEM, only: CPFEM_general, CPFEM_initAll
use numerics, only: relevantStrain, rTol_crystalliteStress, mpieNumThreadsInt !ToDo: change to really needed variables
use homogenization, only: materialpoint_sizeResults, materialpoint_results
!$ use OMP_LIB ! the openMP function library
implicit none
include 'fftw3.f' !header file for fftw3 (declaring variables). Library file is also needed
include 'fftw3.f' !header file for fftw3 (declaring variables). Library files are also needed
! variables to read from loadcase and mesh file
! variables to read from loadcase and geom file
real(pReal), dimension(9) :: valuevector ! stores information temporarily from loadcase file
integer(pInt), parameter :: maxNchunksInput = 24 ! 4 identifiers, 18 values for the matrices and 2 scalars
integer(pInt), dimension (1+maxNchunksInput*2) :: posInput
integer(pInt), parameter :: maxNchunksMesh = 7 ! 4 identifiers, 3 values
integer(pInt), dimension (1+2*maxNchunksMesh) :: posMesh
integer(pInt), parameter :: maxNchunksGeom = 7 ! 4 identifiers, 3 values
integer(pInt), dimension (1+2*maxNchunksGeom) :: posGeom
integer(pInt) unit, N_l, N_s, N_t, N_n ! numbers of identifiers
character(len=1024) path, line
logical gotResolution,gotDimension,gotHomogenization
@ -55,9 +56,9 @@ program mpie_spectral
integer(pInt), dimension(:), allocatable :: bc_steps ! number of steps
logical, dimension(:,:,:,:), allocatable :: bc_mask ! mask of boundary conditions
! variables storing information from mesh file
! variables storing information from geom file
real(pReal) wgt
real(pReal), dimension(3) :: meshdimension
real(pReal), dimension(3) :: geomdimension
integer(pInt) homog, prodnn
integer(pInt), dimension(3) :: resolution
@ -66,6 +67,7 @@ program mpie_spectral
pstress, pstress_av, cstress_av, defgrad_av,&
defgradAim, defgradAimOld, defgradAimCorr, defgradAimCorrPrev,&
mask_stress, mask_defgrad
real(pReal), dimension(3,3,3) :: temp333_Real
real(pReal), dimension(3,3,3,3) :: dPdF, c0, s0
real(pReal), dimension(6) :: cstress ! cauchy stress in Mandel notation
real(pReal), dimension(6,6) :: dsde, c066, s066
@ -82,7 +84,7 @@ program mpie_spectral
integer*8, dimension(2,3,3) :: plan_fft
! convergence etc.
real(pReal) err_div, err_stress, err_defgrad
real(pReal) err_div, err_stress, err_defgrad, err_div_temp
real(pReal) err_div_tol, err_stress_tol, err_stress_tolrel, err_defgrad_tol, sigma0
integer(pInt) itmax, ierr
logical errmatinv
@ -93,14 +95,7 @@ program mpie_spectral
integer(pInt) loadcase, ielem, iter, calcmode, CPFEM_mode
real(pReal) temperature ! not used, but needed for call to CPFEM_general
!gmsh output
character(len=1024) :: nriter
character(len=1024) :: nrstep
character(len=1024) :: nrloadcase
real(pReal), dimension(:,:,:,:), allocatable :: displacement
!gmsh output
!$ call omp_set_num_threads(4) ! set number of threads for parallel execution set by MPIE_NUM_THREADS
!Initializing
bc_maskvector = ''
unit = 234_pInt
@ -110,12 +105,13 @@ program mpie_spectral
N_l = 0_pInt; N_s = 0_pInt
N_t = 0_pInt; N_n = 0_pInt
resolution = 1_pInt; meshdimension = 0.0_pReal
resolution = 1_pInt; geomdimension = 0.0_pReal
err_div_tol = 1.0e-6
err_div_tol = 1.0e-4
itmax = 250_pInt
err_stress_tolrel=0.01
err_defgrad_tol=1.0e-5
err_defgrad_tol=1.0e-3 ! for test
temperature = 300.0_pReal
gotResolution =.false.; gotDimension =.false.; gotHomogenization = .false.
@ -150,9 +146,9 @@ program mpie_spectral
call IO_error(46,ext_msg = path) ! error message for incomplete input file
enddo
! allocate memory depending on lines in input file
101 N_Loadcases = N_l
! allocate memory depending on lines in input file
allocate (bc_velocityGrad(3,3,N_Loadcases)); bc_velocityGrad = 0.0_pReal
allocate (bc_stress(3,3,N_Loadcases)); bc_stress = 0.0_pReal
allocate (bc_mask(3,3,2,N_Loadcases)); bc_mask = .false.
@ -204,7 +200,7 @@ program mpie_spectral
print *, ''
enddo
!read header of mesh file to get the information needed before the complete mesh file is intepretated by mesh.f90
!read header of geom file to get the information needed before the complete geom file is intepretated by mesh.f90
path = getSolverJobName()
print*,'JobName: ',trim(path)
if (.not. IO_open_file(unit,trim(path)//InputFileExtension)) call IO_error(101,ext_msg = path)
@ -213,34 +209,34 @@ program mpie_spectral
do
read(unit,'(a1024)',END = 100) line
if (IO_isBlank(line)) cycle ! skip empty lines
posMesh = IO_stringPos(line,maxNchunksMesh)
posGeom = IO_stringPos(line,maxNchunksGeom)
select case ( IO_lc(IO_StringValue(line,posMesh,1)) )
select case ( IO_lc(IO_StringValue(line,posGeom,1)) )
case ('dimension')
gotDimension = .true.
do i = 2,6,2
select case (IO_lc(IO_stringValue(line,posMesh,i)))
select case (IO_lc(IO_stringValue(line,posGeom,i)))
case('x')
meshdimension(1) = IO_floatValue(line,posMesh,i+1)
geomdimension(1) = IO_floatValue(line,posGeom,i+1)
case('y')
meshdimension(2) = IO_floatValue(line,posMesh,i+1)
geomdimension(2) = IO_floatValue(line,posGeom,i+1)
case('z')
meshdimension(3) = IO_floatValue(line,posMesh,i+1)
geomdimension(3) = IO_floatValue(line,posGeom,i+1)
end select
enddo
case ('homogenization')
gotHomogenization = .true.
homog = IO_intValue(line,posMesh,2)
homog = IO_intValue(line,posGeom,2)
case ('resolution')
gotResolution = .true.
do i = 2,6,2
select case (IO_lc(IO_stringValue(line,posMesh,i)))
select case (IO_lc(IO_stringValue(line,posGeom,i)))
case('a')
resolution(1) = IO_intValue(line,posMesh,i+1)
resolution(1) = IO_intValue(line,posGeom,i+1)
case('b')
resolution(2) = IO_intValue(line,posMesh,i+1)
resolution(2) = IO_intValue(line,posGeom,i+1)
case('c')
resolution(3) = IO_intValue(line,posMesh,i+1)
resolution(3) = IO_intValue(line,posGeom,i+1)
end select
enddo
end select
@ -249,7 +245,7 @@ program mpie_spectral
100 close(unit)
print '(a,/,i4,i4,i4)','resolution a b c', resolution
print '(a,/,f6.1,f6.1,f6.1)','dimension x y z', meshdimension
print '(a,/,f6.1,f6.1,f6.1)','dimension x y z', geomdimension
print *,'homogenization',homog
allocate (workfft(resolution(1)/2+1,resolution(2),resolution(3),3,3)); workfft = 0.0_pReal
@ -260,29 +256,34 @@ program mpie_spectral
allocate (defgrad(resolution(1),resolution(2),resolution(3),3,3)); defgrad = 0.0_pReal
allocate (defgradold(resolution(1),resolution(2),resolution(3),3,3)); defgradold = 0.0_pReal
allocate (ddefgrad(resolution(1),resolution(2),resolution(3))); ddefgrad = 0.0_pReal
allocate (displacement(resolution(1),resolution(2),resolution(3),3)); displacement = 0.0_pReal
! Initialization of fftw (see manual on fftw.org for more details)
call dfftw_init_threads(ierr)
call dfftw_plan_with_nthreads(4)
! Initialization of fftw (see manual on fftw.org for more details)
call dfftw_init_threads(ierr) !toDo: add error code
call dfftw_plan_with_nthreads(mpieNumThreadsInt)
do m = 1,3; do n = 1,3
call dfftw_plan_dft_r2c_3d(plan_fft(1,m,n),resolution(1),resolution(2),resolution(3),&
pstress_field(:,:,:,m,n), workfft(:,:,:,m,n), FFTW_PATIENT)
call dfftw_plan_dft_c2r_3d(plan_fft(2,m,n),resolution(1),resolution(2),resolution(3),&
workfft(:,:,:,m,n), ddefgrad(:,:,:), FFTW_PATIENT)
enddo; enddo
!try to make just one call instead of 9 for the r2c transform. Not working yet
! call dfftw_plan_many_dft_r2c_(plan_fft(1,1,1),3,(/resolution(1),resolution(2),resolution(3)/),9,&
!pstress_field(:,:,:,:,:),NULL,(/resolution(1),resolution(2),resolution(3)/),1, workfft(:,:,:,m,n),NULL, FFTW_PATIENT)
!
prodnn = resolution(1)*resolution(2)*resolution(3)
wgt = 1_pReal/real(prodnn, pReal)
defgradAim = math_I3
defgradAimOld = math_I3
defgrad_av = math_I3
! Initialization of CPFEM_general (= constitutive law) and of deformation gradient field
call CPFEM_initAll(temperature,1_pInt,1_pInt)
ielem = 0_pInt
c066 = 0.0_pReal
c066 = 0.0_pReal
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
defgradold(i,j,k,:,:) = math_I3 !no deformation at the beginning
defgrad(i,j,k,:,:) = math_I3
ielem = ielem +1
ielem = ielem +1
call CPFEM_general(2,math_I3,math_I3,temperature,0.0_pReal,ielem,1_pInt,cstress,dsde,pstress,dPdF)
c066 = c066 + dsde
enddo; enddo; enddo
@ -301,35 +302,34 @@ program mpie_spectral
do i = 1, resolution(1)/2+1
k_s(1) = i-1
xi(i,j,k,3) = 0.0_pReal
if(resolution(3) > 1) xi(i,j,k,3) = real(k_s(3), pReal)/meshdimension(3)
xi(i,j,k,2) = real(k_s(2), pReal)/meshdimension(2)
xi(i,j,k,1) = real(k_s(1), pReal)/meshdimension(1)
if(resolution(3) > 1) xi(i,j,k,3) = real(k_s(3), pReal)/geomdimension(3)
xi(i,j,k,2) = real(k_s(2), pReal)/geomdimension(2)
xi(i,j,k,1) = real(k_s(1), pReal)/geomdimension(1)
if (any(xi(i,j,k,:) /= 0.0_pReal)) then
do l = 1,3; do m = 1,3
xinormdyad(l,m) = xi(i,j,k, l)*xi(i,j,k, m)/sum(xi(i,j,k,:)**2)
enddo; enddo
else
xinormdyad = 0.0_pReal
endif
endif
temp33_Real = math_mul3333xx33(c0, xinormdyad)
temp33_Real = math_inv3x3(temp33_Real)
do l=1,3; do m=1,3; do n=1,3; do p=1,3
gamma_hat(i,j,k, l,m,n,p) = - temp33_Real(l,n) * xinormdyad(m,p)
! gamma_hat(i,j,k, l,m,n,p) = - 0.5_pReal * temp33_Real(l,n) * xinormdyad(m,p)& ! symmetrization????????
! - 0.5_pReal * temp33_Real(m,n) * xinormdyad(l,p)
enddo; enddo; enddo; enddo
gamma_hat(i,j,k, l,m,n,p) = - (0.5*temp33_Real(l,n)+0.5*temp33_Real(n,l)) *&
(0.5*xinormdyad(m,p)+0.5*xinormdyad(p,m))
enddo; enddo; enddo; enddo
enddo; enddo; enddo
open(539,file='stress-strain.out')
open(538,file='results.out') ! write header of output file
path = getLoadcaseName()
write(538,*), 'Loadcase: ',trim(path)
write(538,*), 'Workingdir: ',trim(getSolverWorkingDirectoryName())
path = getSolverJobName()
write(538,*), 'JobName: ',trim(path)
write(538,*), 'resolution a b c', resolution
write(538,'(a,f6.1,f6.1,f6.1)'), 'dimension x y z', meshdimension
write(538,*), 'materialpoint_sizeResults', materialpoint_sizeResults
! write header of output file
open(538,file=trim(getSolverWorkingDirectoryName())//trim(getSolverJobName())//'.out',form='UNFORMATTED')
write(538), 'Loadcase',trim(getLoadcaseName())
write(538), 'Workingdir',trim(getSolverWorkingDirectoryName())
write(538), 'JobName',trim(getSolverJobName())//InputFileExtension
write(538), 'resolution','a', resolution(1),'b', resolution(2),'c', resolution(3)
write(538), 'geomdimension','x', geomdimension(1),'y', geomdimension(2),'z', geomdimension(3)
write(538), 'materialpoint_sizeResults', materialpoint_sizeResults
write(538), 'totalincs', sum(bc_steps)
write(538) materialpoint_results(:,1,:)
! Initialization done
!*************************************************************
@ -362,13 +362,13 @@ program mpie_spectral
enddo; enddo; enddo
guessmode = 1.0_pReal ! keep guessing along former trajectory during same loadcase
calcmode = 0_pInt ! start calculation of BC fullfillment
calcmode = 0_pInt ! start calculation of BC fulfillment
CPFEM_mode = 1_pInt ! winding forward
iter = 0_pInt
err_div= 2_pReal * err_div_tol ! go into loop
defgradAimCorr = 0.0_pReal ! reset damping calculation
damper = damper * 0.9_pReal
!*************************************************************
! convergence loop
do while( iter <= itmax .and. &
@ -391,17 +391,20 @@ program mpie_spectral
cstress,dsde, pstress, dPdF)
enddo; enddo; enddo
ielem = 0_pInt
ielem = 0_pInt
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
ielem = ielem + 1_pInt
call CPFEM_general(CPFEM_mode,& ! first element in first iteration retains CPFEM_mode 1,
defgradold(i,j,k,:,:), defgrad(i,j,k,:,:),& ! others get 2 (saves winding forward effort)
temperature,timeinc,ielem,1_pInt,&
cstress,dsde, pstress, dPdF)
CPFEM_mode = 2_pInt
pstress_field(i,j,k,:,:) = pstress
pstress_field(i,j,k,:,:) = pstress
cstress_field(i,j,k,:,:) = math_mandel6to33(cstress)
enddo; enddo; enddo
c066 = c066 * wgt
c0 = math_mandel66to3333(c066)
do m = 1,3; do n = 1,3
pstress_av(m,n) = sum(pstress_field(:,:,:,m,n)) * wgt
@ -467,9 +470,10 @@ program mpie_spectral
call dfftw_execute_dft_r2c(plan_fft(1,m,n), pstress_field(:,:,:,m,n),workfft(:,:,:,m,n))
if(n==3) sigma0 = max(sigma0, sum(abs(workfft(1,1,1,m,:)))) ! L infinity Norm of stress tensor
enddo; enddo
err_div = (maxval(abs(math_mul33x3_complex(workfft(resolution(1)/2+1,resolution(2)/2+1,resolution(3)/2+1,:,:),&
xi(resolution(1)/2+1,resolution(2)/2+1,resolution(3)/2+1,:))))) ! L infinity Norm of div(stress)
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)/2+1
err_div = err_div + (maxval(abs(math_mul33x3_complex(workfft(i,j,k,:,:),xi(i,j,k,:))))) ! L infinity Norm of div(stress)
temp33_Complex = 0.0_pReal
do m = 1,3; do n = 1,3
temp33_Complex(m,n) = sum(gamma_hat(i,j,k,m,n,:,:) * workfft(i,j,k,:,:))
@ -477,7 +481,9 @@ program mpie_spectral
workfft(i,j,k,:,:) = temp33_Complex(:,:)
enddo; enddo; enddo
workfft(1,1,1,:,:) = defgrad_av - math_I3
err_div = err_div/real((prodnn/resolution(1)*(resolution(1)/2+1)), pReal)/sigma0 !weighting of error
! err_div = err_div/real((prodnn/resolution(1)*(resolution(1)/2+1)), pReal)/sigma0 !weighting of error
err_div = err_div/sigma0 !weighting of error
do m = 1,3; do n = 1,3
call dfftw_execute_dft_c2r(plan_fft(2,m,n), workfft(:,:,:,m,n),ddefgrad(:,:,:))
@ -495,8 +501,8 @@ program mpie_spectral
print '(2(a,E8.2))', ' error divergence ',err_div,' Tol. = ', err_div_tol
print '(2(a,E8.2))', ' error stress ',err_stress,' Tol. = ', err_stress_tol
print '(2(a,E8.2))', ' error deformation gradient ',err_defgrad,' Tol. = ', err_defgrad_tol
if(err_stress > err_stress_tol .or. err_defgrad > err_defgrad_tol .and. err_div < err_div_tol) then ! change to calculation of BCs, reset damper etc.
if((err_stress > err_stress_tol .or. err_defgrad > err_defgrad_tol) .and. err_div < err_div_tol) then ! change to calculation of BCs, reset damper etc.
calcmode = 0
defgradAimCorr = 0.0_pReal
damper = damper * 0.9_pReal
@ -504,88 +510,19 @@ program mpie_spectral
end select
enddo ! end looping when convergency is achieved
do i=1, prodnn !write to output file
write(538,*) materialpoint_results(:,1,i)
enddo
write(538) materialpoint_results(:,1,:) !write to output file
write(539,'(E12.6,a,E12.6)'),log(defgrad_av(3,3)),' ', cstress_av(3,3)
print '(a,x,f12.7)' ,' Determinant of Deformation Aim:', math_det3x3(defgradAim)
print '(a,x,f12.7)' , ' Determinant of Deformation Aim:', math_det3x3(defgradAim)
print '(a,/,3(3(f12.7,x)/))', ' Deformation Aim: ',defgradAim(1:3,:)
print '(a,/,3(3(f12.7,x)/))', ' Deformation Gradient: ',defgrad_av(1:3,:)
print '(a,/,3(3(f10.4,x)/))', ' Cauchy Stress [MPa]: ',cstress_av(1:3,:)/1.e6
print '(A)', '************************************************************'
! Postprocessing (gsmh output)
temp33_Real(1,:) = 0.0_pReal; temp33_Real(1,3) = -(real(resolution(3))/meshdimension(3)) ! start just below origin
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
if((j==1).and.(i==1)) then
temp33_Real(1,:) = temp33_Real(1,:) + math_mul33x3(defgrad(i,j,k,:,:),&
(/0.0_pReal,0.0_pReal,(real(resolution(3))/meshdimension(3))/))
temp33_Real(2,:) = temp33_Real(1,:)
temp33_Real(3,:) = temp33_Real(1,:)
displacement(i,j,k,:) = temp33_Real(1,:)
else
if(i==1) then
temp33_Real(2,:) = temp33_Real(2,:) + math_mul33x3(defgrad(i,j,k,:,:),&
(/0.0_pReal,(real(resolution(2))/meshdimension(2)),0.0_pReal/))
temp33_Real(3,:) = temp33_Real(2,:)
displacement(i,j,k,:) = temp33_Real(2,:)
else
temp33_Real(3,:) = temp33_Real(3,:) + math_mul33x3(defgrad(i,j,k,:,:),&
(/(real(resolution(1))/meshdimension(1)),0.0_pReal,0.0_pReal/))
displacement(i,j,k,:) = temp33_Real(3,:)
endif
endif
enddo; enddo; enddo
write(nrloadcase, *) loadcase; write(nriter, *) iter; write(nrstep, *) steps
open(589,file = 'stress' //trim(adjustl(nrloadcase))//'-'//trim(adjustl(nrstep))//'-'//trim(adjustl(nriter))//'_cpfem.msh')
open(588,file = 'disgrad'//trim(adjustl(nrloadcase))//'-'//trim(adjustl(nrstep))//'-'//trim(adjustl(nriter))//'_cpfem.msh')
write(589, '(4(A, /), I10)'), '$MeshFormat', '2.1 0 8', '$EndMeshFormat', '$Nodes', prodnn
write(588, '(4(A, /), I10)'), '$MeshFormat', '2.1 0 8', '$EndMeshFormat', '$Nodes', prodnn
ielem = 0_pInt
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
write(589, '(I10, 3(tr2, E12.6))'), ielem, displacement(i,j,k,:) !for deformed configuration
write(588, '(I10, 3(tr2, E12.6))'), ielem, displacement(i,j,k,:)
! write(589, '(4(I10,tr2))'), ielem, i-1,j-1,k-1 !for undeformed configuration
! write(588, '(4(I10,tr2))'), ielem, i-1,j-1,k-1
enddo; enddo; enddo
write(589, '(2(A, /), I10)'), '$EndNodes', '$Elements', prodnn
write(588, '(2(A, /), I10)'), '$EndNodes', '$Elements', prodnn
do i = 1, prodnn
write(589, '(I10, A, I10)'), i, ' 15 2 1 2', i
write(588, '(I10, A, I10)'), i, ' 15 2 1 2', i
enddo
write(589, '(A)'), '$EndElements'
write(588, '(A)'), '$EndElements'
write(589, '(8(A, /), I10)'), '$NodeData', '1','"'//trim(adjustl('stress'//trim(adjustl(nrloadcase))//'-'//&
trim(adjustl(nrstep))//'-'//trim(adjustl(nriter))//'_cpfem.msh'))//'"','1','0.0', '3', '0', '9', prodnn
write(588, '(8(A, /), I10)'), '$NodeData', '1','"'//trim(adjustl('disgrad'//trim(adjustl(nrloadcase))//'-'//&
trim(adjustl(nrstep))//'-'//trim(adjustl(nriter))//'_cpfem.msh'))//'"','1','0.0', '3', '0', '9', prodnn
ielem = 0_pInt
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
write(589, '(i10, 9(tr2, E14.8))'), ielem, cstress_field(i,j,k,:,:)
write(588, '(i10, 9(tr2, E14.8))'), ielem, defgrad(i,j,k,:,:) - math_I3
enddo; enddo; enddo
write(589, *), '$EndNodeData'
write(588, *), '$EndNodeData'
close(589); close(588)
enddo ! end looping over steps in current loadcase
enddo ! end looping over loadcases
close(539); close(538)
do i=1,2; do m = 1,3; do n = 1,3
call dfftw_destroy_plan(plan_fft(i,m,n))
enddo; enddo; enddo
close(538)
do i=1,2; do m = 1,3; do n = 1,3
call dfftw_destroy_plan(plan_fft(i,m,n))
enddo; enddo; enddo
end program mpie_spectral

607
code/mpie_spectral2d.f90 Normal file
View File

@ -0,0 +1,607 @@
!* $Id: mpie_spectral2d.f90 665 2010-10-13 16:04:44Z MPIE\m.diehl $
!********************************************************************
! Material subroutine for BVP solution using spectral method
! Version for 2D Problems, suitable for testing and implementation of new features
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! Not working by now due to changes on other routines
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
! written by P. Eisenlohr,
! F. Roters,
! L. Hantcherli,
! W.A. Counts
! D.D. Tjahjanto
! C. Kords
! M. Diehl
! R. Lebensohn
!
! MPI fuer Eisenforschung, Duesseldorf
!
!********************************************************************
! Usage:
! - start program with mpie_spectral PathToMeshFile/NameOfMesh.mesh
! PathToLoadFile/NameOfLoadFile.load
! - PathToLoadFile will be the working directory
! - make sure the file "material.config" exists in the working
! directory
!********************************************************************
program mpie_spectral
!********************************************************************
use mpie_interface
use prec, only: pInt, pReal
use IO
use math
use CPFEM, only: CPFEM_general
use numerics, only: relevantStrain, rTol_crystalliteStress
implicit none
include 'fftw3.f' !header file for fftw3 (declaring variables). Library file is also needed
! variables to read from loadcase and mesh file
real(pReal), dimension(9) :: valuevector ! stores information temporarily from loadcase file
integer(pInt), parameter :: maxNchunksInput = 24 ! 4 identifiers, 18 values for the matrices and 2 scalars
integer(pInt), dimension (1+maxNchunksInput*2) :: posInput
integer(pInt), parameter :: maxNchunksMesh = 7 ! 4 identifiers, 3 values
integer(pInt), dimension (1+2*maxNchunksMesh) :: posMesh
integer(pInt) unit, N_l, N_s, N_t, N_n ! numbers of identifiers
character(len=1024) path, line
logical gotResolution,gotDimension,gotHomogenization
logical, dimension(9) :: bc_maskvector
! variables storing information from loadcase file
real(pReal) timeinc
real(pReal), dimension (:,:,:), allocatable :: bc_velocityGrad, &
bc_stress ! velocity gradient and stress BC
real(pReal), dimension(:), allocatable :: bc_timeIncrement ! length of increment
integer(pInt) N_Loadcases, steps
integer(pInt), dimension(:), allocatable :: bc_steps ! number of steps
logical, dimension(:,:,:,:), allocatable :: bc_mask ! mask of boundary conditions
! variables storing information from mesh file
real(pReal) wgt
real(pReal), dimension(3) :: meshdimension
integer(pInt) homog, prodnn
integer(pInt), dimension(3) :: resolution
! stress etc.
real(pReal), dimension(3,3) :: ones, zeroes, temp33_Real, damper,&
pstress, pstress_av, cstress_av, defgrad_av,&
defgradAim, defgradAimOld, defgradAimCorr, defgradAimCorrPrev,&
mask_stress, mask_defgrad
real(pReal), dimension(3,3,3,3) :: dPdF, c0, s0
real(pReal), dimension(6) :: cstress ! cauchy stress in Mandel notation
real(pReal), dimension(6,6) :: dsde, c066, s066
real(pReal), dimension(:,:,:,:), allocatable :: defgradold, cstress_field, defgrad
complex(pReal), dimension(:,:,:,:), allocatable :: pstress_field, tau
complex(pReal), dimension(:,:), allocatable :: ddefgrad
! variables storing information for spectral method
complex(pReal), dimension(:,:,:,:), allocatable :: workfft
complex(pReal), dimension(3,3) :: temp33_Complex
real(pReal), dimension(3,3) :: xinormdyad
real(pReal), dimension(:,:,:,:,:,:), allocatable :: gamma_hat
real(pReal), dimension(:,:,:), allocatable :: xi
integer(pInt), dimension(2) :: k_s
integer*8, dimension(3,3,3) :: plan_fft
! convergence etc.
real(pReal) err_div, err_stress, err_defgrad
real(pReal) err_div_tol, err_stress_tol, err_stress_tolrel, sigma0
integer(pInt) itmax, ierr
logical errmatinv
! loop variables etc.
real(pReal) guessmode ! flip-flop to guess defgrad fluctuation field evolution
integer(pInt) i, j, k, l, m, n, p
integer(pInt) loadcase, ielem, iter, calcmode, CPFEM_mode
real(pReal) temperature ! not used, but needed for call to CPFEM_general
!gmsh output
character(len=1024) :: nriter
character(len=1024) :: nrstep
character(len=1024) :: nrloadcase
real(pReal), dimension(:,:,:), allocatable :: displacement
!gmsh output
!Initializing
bc_maskvector = ''
unit = 234_pInt
ones = 1.0_pReal
zeroes = 0.0_pReal
N_l = 0_pInt
N_s = 0_pInt
N_t = 0_pInt
N_n = 0_pInt
resolution = 1_pInt; meshdimension = 0.0_pReal
err_div_tol = 1.0e-4
itmax = 250_pInt
err_stress_tolrel=0.01
temperature = 300.0_pReal
gotResolution =.false.; gotDimension =.false.; gotHomogenization = .false.
if (IargC() /= 2) call IO_error(102) ! check for correct number of given arguments
! Reading the loadcase file and assign variables
path = getLoadcaseName()
print*,'Loadcase: ',trim(path)
print*,'Workingdir: ',trim(getSolverWorkingDirectoryName())
if (.not. IO_open_file(unit,path)) call IO_error(45,ext_msg = path)
rewind(unit)
do
read(unit,'(a1024)',END = 101) line
if (IO_isBlank(line)) cycle ! skip empty lines
posInput = IO_stringPos(line,maxNchunksInput)
do i = 1, maxNchunksInput, 1
select case (IO_lc(IO_stringValue(line,posInput,i)))
case('l','velocitygrad')
N_l = N_l+1
case('s','stress')
N_s = N_s+1
case('t','time','delta')
N_t = N_t+1
case('n','incs','increments','steps')
N_n = N_n+1
end select
enddo ! count all identifiers to allocate memory and do sanity check
if ((N_l /= N_s).or.(N_s /= N_t).or.(N_t /= N_n)) & ! sanity check
call IO_error(46,ext_msg = path) !error message for incomplete input file
enddo
! allocate memory depending on lines in input file
101 N_Loadcases = N_l
allocate (bc_velocityGrad(3,3,N_Loadcases)); bc_velocityGrad = 0.0_pReal
allocate (bc_stress(3,3,N_Loadcases)); bc_stress = 0.0_pReal
allocate (bc_mask(3,3,2,N_Loadcases)); bc_mask = .false.
allocate (bc_timeIncrement(N_Loadcases)); bc_timeIncrement = 0.0_pReal
allocate (bc_steps(N_Loadcases)); bc_steps = 0_pInt
rewind(unit)
i = 0_pInt
do
read(unit,'(a1024)',END = 200) line
if (IO_isBlank(line)) cycle ! skip empty lines
i = i + 1
posInput = IO_stringPos(line,maxNchunksInput)
do j = 1,maxNchunksInput,2
select case (IO_lc(IO_stringValue(line,posInput,j)))
case('l','velocitygrad')
valuevector = 0.0_pReal
forall (k = 1:9) bc_maskvector(k) = IO_stringValue(line,posInput,j+k) /= '#'
do k = 1,9
if (bc_maskvector(k)) valuevector(k) = IO_floatValue(line,posInput,j+k) ! assign values for the velocity gradient matrix
enddo
bc_mask(:,:,1,i) = reshape(bc_maskvector,(/3,3/))
bc_velocityGrad(:,:,i) = reshape(valuevector,(/3,3/))
case('s','stress')
valuevector = 0.0_pReal
forall (k = 1:9) bc_maskvector(k) = IO_stringValue(line,posInput,j+k) /= '#'
do k = 1,9
if (bc_maskvector(k)) valuevector(k) = IO_floatValue(line,posInput,j+k) ! assign values for the bc_stress matrix
enddo
bc_mask(:,:,2,i) = reshape(bc_maskvector,(/3,3/))
bc_stress(:,:,i) = reshape(valuevector,(/3,3/))
case('t','time','delta') ! increment time
bc_timeIncrement(i) = IO_floatValue(line,posInput,j+1)
case('n','incs','increments','steps') ! bc_steps
bc_steps(i) = IO_intValue(line,posInput,j+1)
end select
enddo; enddo
200 close(unit)
do i = 1, N_Loadcases
if (any(bc_mask(:,:,1,i) == bc_mask(:,:,2,i))) call IO_error(47,i) ! bc_mask consistency
print '(a,/,3(3(f12.6,x)/))','L',bc_velocityGrad(:,:,i)
print '(a,/,3(3(f12.6,x)/))','bc_stress',bc_stress(:,:,i)
print '(a,/,3(3(l,x)/))','bc_mask for velocitygrad',bc_mask(:,:,1,i)
print '(a,/,3(3(l,x)/))','bc_mask for stress',bc_mask(:,:,2,i)
print *,'time',bc_timeIncrement(i)
print *,'incs',bc_steps(i)
print *, ''
enddo
!read header of mesh file to get the information needed before the complete mesh file is intepretated by mesh.f90
path = getSolverJobName()
print*,'JobName: ',trim(path)
if (.not. IO_open_file(unit,trim(path)//InputFileExtension)) call IO_error(101,ext_msg = path)
rewind(unit)
do
read(unit,'(a1024)',END = 100) line
if (IO_isBlank(line)) cycle ! skip empty lines
posMesh = IO_stringPos(line,maxNchunksMesh)
select case ( IO_lc(IO_StringValue(line,posMesh,1)) )
case ('dimension')
gotDimension = .true.
do i = 2,6,2
select case (IO_lc(IO_stringValue(line,posMesh,i)))
case('x')
meshdimension(1) = IO_floatValue(line,posMesh,i+1)
case('y')
meshdimension(2) = IO_floatValue(line,posMesh,i+1)
case('z')
meshdimension(3) = IO_floatValue(line,posMesh,i+1)
end select
enddo
case ('homogenization')
gotHomogenization = .true.
homog = IO_intValue(line,posMesh,2)
case ('resolution')
gotResolution = .true.
do i = 2,6,2
select case (IO_lc(IO_stringValue(line,posMesh,i)))
case('a')
resolution(1) = IO_intValue(line,posMesh,i+1)
case('b')
resolution(2) = IO_intValue(line,posMesh,i+1)
case('c')
resolution(3) = IO_intValue(line,posMesh,i+1)
end select
enddo
end select
if (gotDimension .and. gotHomogenization .and. gotResolution) exit
if (resolution(3) /=1) exit
enddo
100 close(unit)
print '(a,/,i4,i4,i4)','resolution a b c', resolution
print '(a,/,f6.1,f6.1,f6.1)','dimension x y z', meshdimension
print *,'homogenization',homog
print *, ''
allocate (workfft(resolution(1),resolution(2),3,3)); workfft = 0.0_pReal
allocate (gamma_hat(resolution(1),resolution(2),3,3,3,3)); gamma_hat = 0.0_pReal
allocate (xi(resolution(1),resolution(2),3)); xi = 0.0_pReal
allocate (pstress_field(resolution(1),resolution(2),3,3)); pstress_field = 0.0_pReal
allocate (cstress_field(resolution(1),resolution(2),3,3)); cstress_field = 0.0_pReal
allocate (tau(resolution(1),resolution(2),3,3)); tau = 0.0_pReal
allocate (displacement(resolution(1),resolution(2),3)); displacement = 0.0_pReal
allocate (defgrad(resolution(1),resolution(2),3,3)); defgrad = 0.0_pReal
allocate (defgradold(resolution(1),resolution(2),3,3)); defgradold = 0.0_pReal
allocate (ddefgrad(resolution(1),resolution(2))); ddefgrad = 0.0_pReal
! Initialization of fftw (see manual on fftw.org for more details)
call dfftw_init_threads(ierr)
call dfftw_plan_with_nthreads(4)
do m = 1,3; do n = 1,3
call dfftw_plan_dft_2d(plan_fft(1,m,n),resolution(1),resolution(2),&
cstress_field(:,:,m,n), workfft(:,:,m,n), FFTW_PATIENT, FFTW_FORWARD) !only for calculation of div (P)
call dfftw_plan_dft_2d(plan_fft(2,m,n),resolution(1),resolution(2),&
tau(:,:,m,n), workfft(:,:,m,n), FFTW_PATIENT, FFTW_FORWARD)
call dfftw_plan_dft_2d(plan_fft(3,m,n),resolution(1),resolution(2),&
workfft(:,:,m,n), ddefgrad(:,:), FFTW_PATIENT, FFTW_BACKWARD)
enddo; enddo
prodnn = resolution(1)*resolution(2)
wgt = 1_pReal/real(prodnn, pReal)
defgradAim = math_I3
defgradAimOld = math_I3
defgrad_av = math_I3
! Initialization of CPFEM_general (= constitutive law) and of deformation gradient field
ielem = 0_pInt
c066 = 0.0_pReal
do j = 1, resolution(3); do i = 1, resolution(2)
defgradold(i,j,:,:) = math_I3 !no deformation at the beginning
defgrad(i,j,:,:) = math_I3
ielem = ielem +1
call CPFEM_general(2,math_I3,math_I3,temperature,0.0_pReal,ielem,1_pInt,cstress,dsde,pstress,dPdF)
c066 = c066 + dsde
enddo; enddo
c066 = c066 * wgt
c0 = math_mandel66to3333(c066)
call math_invert(6, c066, s066,i, errmatinv)
s0 = math_mandel66to3333(s066)
!calculation of xinormdyad (to calculate gamma_hat) and xi (waves, for proof of equilibrium)
do j = 1, resolution(2)
k_s(2) = j-1
if(j > resolution(2)/2+1) k_s(2) = k_s(2)-resolution(2)
do i = 1, resolution(1)
k_s(1) = i-1
if(i > resolution(1)/2+1) k_s(1) = k_s(1)-resolution(1)
xi(i,j,3) = 0.0_pReal
xi(i,j,2) = real(k_s(2), pReal)/meshdimension(2)
xi(i,j,1) = real(k_s(1), pReal)/meshdimension(1)
if (any(xi(i,j,:) /= 0.0_pReal)) then
do l = 1,2; do m = 1,2
xinormdyad(l,m) = xi(i,j, l)*xi(i,j, m)/sum(xi(i,j,:)**2)
enddo; enddo
else
xinormdyad = 0.0_pReal
endif
temp33_Real = math_mul3333xx33(c0, xinormdyad)
temp33_Real = math_inv3x3(temp33_Real)
do l=1,3; do m=1,3; do n=1,3; do p=1,3
gamma_hat(i,j, l,m,n,p) = - temp33_Real(l,n) * xinormdyad(m,p)
! gamma_hat(i,j,k, l,m,n,p) = - 0.5_pReal * temp33_Real(l,n) * xinormdyad(m,p)& ! symmetrization????????
! - 0.5_pReal * temp33_Real(m,n) * xinormdyad(l,p)
enddo; enddo; enddo; enddo
enddo; enddo
open(539,file='stress-strain.out')
! Initialization done
!*************************************************************
!Loop over loadcases defined in the loadcase file
do loadcase = 1, N_Loadcases
!*************************************************************
timeinc = bc_timeIncrement(loadcase)/bc_steps(loadcase)
guessmode = 0.0_pReal ! change of load case, homogeneous guess for the first step
mask_defgrad = merge(ones,zeroes,bc_mask(:,:,1,loadcase))
mask_stress = merge(ones,zeroes,bc_mask(:,:,2,loadcase))
damper = ones/10
!*************************************************************
! loop oper steps defined in input file for current loadcase
do steps = 1, bc_steps(loadcase)
!*************************************************************
temp33_Real = defgradAim
defgradAim = defgradAim & ! update macroscopic displacement gradient (defgrad BC)
+ guessmode * mask_stress * (defgradAim - defgradAimOld) &
+ math_mul33x33(bc_velocityGrad(:,:,loadcase), defgradAim)*timeinc
defgradAimOld = temp33_Real
do j = 1, resolution(2); do i = 1, resolution(1)
temp33_Real = defgrad(i,j,:,:)
defgrad(i,j,:,:) = defgrad(i,j,:,:)& ! old fluctuations as guess for new step, no fluctuations for new loadcase
+ guessmode * (defgrad(i,j,:,:) - defgradold(i,j,:,:))&
+ (1.0_pReal-guessmode) * math_mul33x33(bc_velocityGrad(:,:,loadcase),defgradold(i,j,:,:))*timeinc
defgradold(i,j,:,:) = temp33_Real
enddo; enddo
guessmode = 1.0_pReal ! keep guessing along former trajectory during same loadcase
calcmode = 0_pInt ! start calculation of BC fullfillment
CPFEM_mode = 1_pInt ! winding forward
iter = 0_pInt
err_div= 2_pReal * err_div_tol ! go into loop
defgradAimCorr = 0.0_pReal ! reset damping calculation
damper = damper * 0.9_pReal
!*************************************************************
! convergence loop
do while( iter <= itmax .and. &
(err_div > err_div_tol .or. &
err_stress > err_stress_tol))
iter = iter + 1
print '(A,I5.5,tr2,A,I5.5)', ' Step = ',steps,'Iteration = ',iter
!*************************************************************
! adjust defgrad to fulfill BCs
select case (calcmode)
case (0)
print *, 'Update Stress Field (constitutive evaluation P(F))'
ielem = 0_pInt
do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
call CPFEM_general(3, defgradold(i,j,:,:), defgrad(i,j,:,:),&
temperature,timeinc,ielem,1_pInt,&
cstress,dsde, pstress, dPdF)
enddo; enddo
ielem = 0_pInt
do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
call CPFEM_general(CPFEM_mode,& ! first element in first iteration retains CPFEM_mode 1,
defgradold(i,j,:,:), defgrad(i,j,:,:),& ! others get 2 (saves winding forward effort)
temperature,timeinc,ielem,1_pInt,&
cstress,dsde, pstress, dPdF)
CPFEM_mode = 2_pInt
pstress_field(i,j,:,:) = pstress
cstress_field(i,j,:,:) = math_mandel6to33(cstress)
enddo; enddo
do m = 1,3; do n = 1,3
pstress_av(m,n) = sum(pstress_field(:,:,m,n)) * wgt
cstress_av(m,n) = sum(cstress_field(:,:,m,n)) * wgt
defgrad_av(m,n) = sum(defgrad(:,:,m,n)) * wgt
enddo; enddo
err_stress = maxval(abs(mask_stress * (cstress_av - bc_stress(:,:,loadcase))))
err_stress_tol = maxval(abs(cstress_av))*err_stress_tolrel
print*, 'Correcting deformation gradient to fullfill BCs'
defgradAimCorrPrev = defgradAimCorr
defgradAimCorr = -mask_stress * math_mul3333xx33(s0, (mask_stress*(cstress_av - bc_stress(:,:,loadcase))))
do m=1,3; do n =1,3 ! calculate damper (correction is far to strong)
if ( sign(1.0_pReal,defgradAimCorr(m,n))/=sign(1.0_pReal,defgradAimCorrPrev(m,n))) then
damper(m,n) = max(0.01_pReal,damper(m,n)*0.8)
else
damper(m,n) = min(1.0_pReal,damper(m,n) *1.2)
endif
enddo; enddo
defgradAimCorr = mask_Stress*(damper * defgradAimCorr)
defgradAim = defgradAim + defgradAimCorr
do m = 1,3; do n = 1,3
defgrad(:,:,m,n) = defgrad(:,:,m,n) + (defgradAim(m,n) - defgrad_av(m,n)) !anticipated target minus current state
enddo; enddo
err_div = 2 * err_div_tol
err_defgrad = maxval(abs(mask_defgrad * (defgrad_av - defgradAim)))
print '(a,/,3(3(f12.7,x)/))', ' Deformation Gradient: ',defgrad_av(1:3,:)
print '(a,/,3(3(f10.4,x)/))', ' Cauchy Stress [MPa]: ',cstress_av(1:3,:)/1.e6
print '(a,E8.2)', ' error defgrad ',err_defgrad
print '(2(a,E8.2))', ' error stress ',err_stress,' Tol. = ', err_stress_tol*0.8
if(err_stress < err_stress_tol*0.8) then
calcmode = 1
endif
! Using the spectral method to calculate the change of deformation gradient, check divergence of stress field in fourier space
case (1)
print *, 'Update Stress Field (constitutive evaluation P(F))'
ielem = 0_pInt
do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
call CPFEM_general(3, defgradold(i,j,:,:), defgrad(i,j,:,:),&
temperature,timeinc,ielem,1_pInt,&
cstress,dsde, pstress, dPdF)
enddo; enddo
ielem = 0_pInt
do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
call CPFEM_general(2,&
defgradold(i,j,:,:), defgrad(i,j,:,:),&
temperature,timeinc,ielem,1_pInt,&
cstress,dsde, pstress, dPdF)
pstress_field(i,j,:,:) = pstress
cstress_field(i,j,:,:) = math_mandel6to33(cstress)
enddo; enddo
do j = 1, resolution(2); do i = 1, resolution(1)
tau(i,j,:,:) = cstress_field(i,j,:,:) - math_mul3333xx33(c0, defgrad(i,j,:,:)-math_I3)
enddo; enddo
print *, 'Calculating equilibrium using spectral method'
err_div = 0.0_pReal; sigma0 = 0.0_pReal
do m = 1,3; do n = 1,3
call dfftw_execute_dft(plan_fft(1,m,n), cstress_field(:,:,m,n),workfft(:,:,m,n))
if(n==3) sigma0 = max(sigma0, sum(abs(workfft(1,1,m,:)))) ! L infinity Norm of stress tensor
enddo; enddo
do j = 1, resolution(2); do i = 1, resolution(1)
err_div = err_div + (maxval(abs(math_mul33x3_complex(workfft(i,j,:,:),xi(i,j,:))))) ! L infinity Norm of div(stress)
enddo; enddo
err_div = err_div/real(prodnn, pReal)/sigma0 !weighting of error
do m = 1,3; do n = 1,3
call dfftw_execute_dft(plan_fft(2,m,n), tau(:,:,m,n), workfft(:,:,m,n))
enddo; enddo
do j = 1, resolution(2); do i = 1, resolution(1)
temp33_Complex = 0.0_pReal
do m = 1,3; do n = 1,3
temp33_Complex(m,n) = sum(gamma_hat(i,j,m,n,:,:) * workfft(i,j,:,:))
enddo; enddo
workfft(i,j,:,:) = temp33_Complex(:,:)
enddo; enddo
workfft(1,1,:,:) = zeroes!????
do m = 1,3; do n = 1,3
call dfftw_execute_dft(plan_fft(3,m,n), workfft(:,:,m,n),ddefgrad(:,:))
defgrad(:,:,m,n) = defgrad_av(m,n) + real(ddefgrad, pReal) * wgt
pstress_av(m,n) = sum(pstress_field(:,:,m,n))*wgt
cstress_av(m,n) = sum(cstress_field(:,:,m,n))*wgt
defgrad_av(m,n) = sum(defgrad(:,:,m,n))*wgt
defgrad(:,:,m,n) = defgrad(:,:,m,n) + (defgradAim(m,n) - defgrad_av(m,n)) !anticipated target minus current state
enddo; enddo
err_stress = maxval(abs(mask_stress * (cstress_av - bc_stress(:,:,loadcase))))
err_stress_tol = maxval(abs(cstress_av))*err_stress_tolrel !accecpt relativ error specified
print '(2(a,E8.2))', ' error divergence ',err_div,' Tol. = ', err_div_tol
print '(2(a,E8.2))', ' error stress ',err_stress,' Tol. = ', err_stress_tol
if(err_stress > err_stress_tol .and. err_div < err_div_tol) then ! change to calculation of BCs, reset damper etc.
calcmode = 0
defgradAimCorr = 0.0_pReal
damper = damper * 0.9_pReal
endif
end select
enddo ! end looping when convergency is achieved
write(539,'(E12.6,a,E12.6)'),defgrad_av(3,3)-1,' ', cstress_av(3,3)
print '(a,/,3(3(f12.7,x)/))', ' Deformation Gradient: ',defgrad_av(1:3,:)
print *, ''
print '(a,/,3(3(f10.4,x)/))', ' Cauchy Stress [MPa]: ',cstress_av(1:3,:)/1.e6
print '(A)', '************************************************************'
! Postprocessing (gsmh output)
temp33_Real(1,:) = 0.0_pReal; temp33_Real(1,3) = -(real(resolution(3))/meshdimension(3)) ! start just below origin
k=1
do j = 1, resolution(2); do i = 1, resolution(1)
if((j==1).and.(i==1)) then
temp33_Real(1,:) = temp33_Real(1,:) + math_mul33x3(defgrad(i,j,:,:),&
(/0.0_pReal,0.0_pReal,(real(resolution(3))/meshdimension(3))/))
temp33_Real(2,:) = temp33_Real(1,:)
temp33_Real(3,:) = temp33_Real(1,:)
displacement(i,j,:) = temp33_Real(1,:)
else
if(i==1) then
temp33_Real(2,:) = temp33_Real(2,:) + math_mul33x3(defgrad(i,j,:,:),&
(/0.0_pReal,(real(resolution(2))/meshdimension(2)),0.0_pReal/))
temp33_Real(3,:) = temp33_Real(2,:)
displacement(i,j,:) = temp33_Real(2,:)
else
temp33_Real(3,:) = temp33_Real(3,:) + math_mul33x3(defgrad(i,j,:,:),&
(/(real(resolution(1))/meshdimension(1)),0.0_pReal,0.0_pReal/))
displacement(i,j,:) = temp33_Real(3,:)
endif
endif
enddo; enddo
write(nrloadcase, *) loadcase; write(nriter, *) iter; write(nrstep, *) steps
open(589,file = 'stress' //trim(adjustl(nrloadcase))//'-'//trim(adjustl(nrstep))//'-'//trim(adjustl(nriter))//'_cpfem.msh')
open(588,file = 'disgrad'//trim(adjustl(nrloadcase))//'-'//trim(adjustl(nrstep))//'-'//trim(adjustl(nriter))//'_cpfem.msh')
write(589, '(4(A, /), I10)'), '$MeshFormat', '2.1 0 8', '$EndMeshFormat', '$Nodes', prodnn
write(588, '(4(A, /), I10)'), '$MeshFormat', '2.1 0 8', '$EndMeshFormat', '$Nodes', prodnn
ielem = 0_pInt
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
write(589, '(I10, 3(tr2, E12.6))'), ielem, displacement(i,j,:) !for deformed configuration
write(588, '(I10, 3(tr2, E12.6))'), ielem, displacement(i,j,:)
! write(589, '(4(I10,tr2))'), ielem, i-1,j-1,k-1 !for undeformed configuration
! write(588, '(4(I10,tr2))'), ielem, i-1,j-1,k-1
enddo; enddo; enddo
write(589, '(2(A, /), I10)'), '$EndNodes', '$Elements', prodnn
write(588, '(2(A, /), I10)'), '$EndNodes', '$Elements', prodnn
do i = 1, prodnn
write(589, '(I10, A, I10)'), i, ' 15 2 1 2', i
write(588, '(I10, A, I10)'), i, ' 15 2 1 2', i
enddo
write(589, '(A)'), '$EndElements'
write(588, '(A)'), '$EndElements'
write(589, '(8(A, /), I10)'), '$NodeData', '1','"'//trim(adjustl('stress'//trim(adjustl(nrloadcase))//'-'//&
trim(adjustl(nrstep))//'-'//trim(adjustl(nriter))//'_cpfem.msh'))//'"','1','0.0', '3', '0', '9', prodnn
write(588, '(8(A, /), I10)'), '$NodeData', '1','"'//trim(adjustl('disgrad'//trim(adjustl(nrloadcase))//'-'//&
trim(adjustl(nrstep))//'-'//trim(adjustl(nriter))//'_cpfem.msh'))//'"','1','0.0', '3', '0', '9', prodnn
ielem = 0_pInt
do k = 1, resolution(3); do j = 1, resolution(2); do i = 1, resolution(1)
ielem = ielem + 1
write(589, '(i10, 9(tr2, E14.8))'), ielem, cstress_field(i,j,:,:)
write(588, '(i10, 9(tr2, E14.8))'), ielem, defgrad(i,j,:,:) - math_I3
enddo; enddo; enddo
write(589, *), '$EndNodeData'
write(588, *), '$EndNodeData'
close(589); close(588)
enddo ! end looping over steps in current loadcase
enddo ! end looping over loadcases
close(539)
do i=1,3; do m = 1,3; do n = 1,3
call dfftw_destroy_plan(plan_fft(i,m,n))
enddo; enddo; enddo
end program mpie_spectral
!********************************************************************
! quit subroutine to satisfy IO_error
!
!********************************************************************
subroutine quit(id)
use prec
implicit none
integer(pInt) id
stop
end subroutine

7
code/mpie_spectral_interface.f90
View File

@ -4,7 +4,8 @@
MODULE mpie_interface
use prec, only: pInt, pReal
character(len=64), parameter :: FEsolver = 'Spectral'
character(len=5), parameter :: InputFileExtension = '.mesh'
character(len=5), parameter :: InputFileExtension = '.geom'
character(len=4), parameter :: LogFileExtension = '.log' !until now, we don't have a log file. But IO.f90 requires it
CONTAINS
@ -49,7 +50,7 @@ function getSolverWorkingDirectoryName()
endfunction
!********************************************************************
! basename of meshfile from command line arguments
! basename of geometry file from command line arguments
!
!********************************************************************
function getSolverJobName()
@ -69,7 +70,7 @@ function getSolverJobName()
posSep = scan(outName,pathSep,back=.true.)
if (posExt <= posSep) posExt = len_trim(outName)+1 ! no extension present
getSolverJobName = outName(1:posExt-1) ! path to mesh file (excl. extension)
getSolverJobName = outName(1:posExt-1) ! path to geometry file (excl. extension)
if (scan(getSolverJobName,pathSep) /= 1) then ! relative path given as command line argument
call getcwd(cwd)