don't depend on any shear band parameters if sbVelocity is switched of

This commit is contained in:
Martin Diehl 2018-07-20 17:52:15 +02:00
parent 8554279351
commit 1c83f841aa
1 changed files with 22 additions and 27 deletions

View File

@ -283,6 +283,8 @@ subroutine plastic_dislotwin_init(fileUnit)
allocate(plastic_dislotwin_output(maxval(phase_Noutput),maxNinstance))
plastic_dislotwin_output = ''
allocate(param(maxNinstance))
allocate(state(maxNinstance))
allocate(dotState(maxNinstance))
allocate(sbSv(6,6,homogenization_maxNgrains,mesh_maxNips,mesh_NcpElems), source=0.0_pReal)
@ -398,9 +400,9 @@ subroutine plastic_dislotwin_init(fileUnit)
endif
prm%aTolRho = config_phase(p)%getFloat('atol_rho')
prm%aTolTwinFrac = config_phase(p)%getFloat('atol_twinfrac')
prm%aTolTransFrac = config_phase(p)%getFloat('atol_transfrac')
prm%aTolRho = config_phase(p)%getFloat('atol_rho', defaultVal=0.0_pReal)
prm%aTolTwinFrac = config_phase(p)%getFloat('atol_twinfrac', defaultVal=0.0_pReal)
prm%aTolTransFrac = config_phase(p)%getFloat('atol_transfrac', defaultVal=0.0_pReal)
prm%CAtomicVolume = config_phase(p)%getFloat('catomicvolume')
prm%GrainSize = config_phase(p)%getFloat('grainsize')
@ -410,12 +412,13 @@ subroutine plastic_dislotwin_init(fileUnit)
prm%Qsd = config_phase(p)%getFloat('qsd')
prm%SolidSolutionStrength = config_phase(p)%getFloat('solidsolutionstrength')
prm%dipoleFormationFactor= config_phase(p)%getFloat('dipoleformationfactor', defaultVal=1.0_pReal) ! ToDo: How to handle that???
prm%sbResistance = config_phase(p)%getFloat('shearbandresistance',defaultVal=0.0_pReal)
prm%sbVelocity = config_phase(p)%getFloat('shearbandvelocity',defaultVal=0.0_pReal)
if (prm%sbVelocity > 0.0_pReal) then
prm%sbResistance = config_phase(p)%getFloat('shearbandresistance')
prm%sbQedge = config_phase(p)%getFloat('qedgepersbsystem')
prm%pShearBand = config_phase(p)%getFloat('p_shearband')
prm%qShearBand = config_phase(p)%getFloat('q_shearband')
endif
outputs = config_phase(p)%getStrings('(output)', defaultVal=emptyString)
allocate(prm%outputID(0))
@ -520,13 +523,8 @@ subroutine plastic_dislotwin_init(fileUnit)
endif
enddo
enddo
sanityChecks: do p = 1_pInt, size(phase_plasticity)
if (phase_plasticity(p) /= PLASTICITY_dislotwin_ID) cycle
instance = phase_plasticityInstance(p)
prm => param(instance)
do f = 1_pInt,lattice_maxNslipFamily
! if (rhoEdge0(f,instance) < 0.0_pReal) &
! call IO_error(211_pInt,el=instance,ext_msg='rhoEdge0 ('//PLASTICITY_DISLOTWIN_label//')')
@ -569,13 +567,13 @@ subroutine plastic_dislotwin_init(fileUnit)
if (prm%aTolTransFrac <= 0.0_pReal) &
call IO_error(211_pInt,el=instance,ext_msg='aTolTransFrac ('//PLASTICITY_DISLOTWIN_label//')')
endif
if (prm%sbResistance < 0.0_pReal) &
call IO_error(211_pInt,el=instance,ext_msg='sbResistance ('//PLASTICITY_DISLOTWIN_label//')')
if (prm%sbVelocity < 0.0_pReal) &
call IO_error(211_pInt,el=instance,ext_msg='sbVelocity ('//PLASTICITY_DISLOTWIN_label//')')
if (prm%sbVelocity > 0.0_pReal .and. &
prm%pShearBand <= 0.0_pReal) &
call IO_error(211_pInt,el=instance,ext_msg='pShearBand ('//PLASTICITY_DISLOTWIN_label//')')
!if (prm%sbResistance < 0.0_pReal) &
! call IO_error(211_pInt,el=instance,ext_msg='sbResistance ('//PLASTICITY_DISLOTWIN_label//')')
!if (prm%sbVelocity < 0.0_pReal) &
! call IO_error(211_pInt,el=instance,ext_msg='sbVelocity ('//PLASTICITY_DISLOTWIN_label//')')
!if (prm%sbVelocity > 0.0_pReal .and. &
! prm%pShearBand <= 0.0_pReal) &
! call IO_error(211_pInt,el=instance,ext_msg='pShearBand ('//PLASTICITY_DISLOTWIN_label//')')
if (dNeq0(prm%dipoleFormationFactor) .and. &
dNeq(prm%dipoleFormationFactor, 1.0_pReal)) &
call IO_error(211_pInt,el=instance,ext_msg='dipoleFormationFactor ('//PLASTICITY_DISLOTWIN_label//')')
@ -583,11 +581,10 @@ subroutine plastic_dislotwin_init(fileUnit)
prm%qShearBand <= 0.0_pReal) &
call IO_error(211_pInt,el=instance,ext_msg='qShearBand ('//PLASTICITY_DISLOTWIN_label//')')
!--------------------------------------------------------------------------------------------------
! Determine total number of active slip or twin systems
enddo sanityChecks
enddo
! ToDo: this should be stored somewhere else. Works only for the whole instance!!
! prm%totalNtwin should be the maximum over all totalNtwins!
allocate(tau_r_twin(prm%totalNtwin, maxNinstance), source=0.0_pReal)
allocate(tau_r_trans(prm%totalNtrans, maxNinstance), source=0.0_pReal)
@ -600,8 +597,6 @@ subroutine plastic_dislotwin_init(fileUnit)
allocate(Ctwin3333(3,3,3,3,prm%totalNtwin), source=0.0_pReal)
allocate(Ctrans3333(3,3,3,3,prm%totalNtrans), source=0.0_pReal)
allocate(state(maxNinstance))
allocate(dotState(maxNinstance))
initializeInstances: do p = 1_pInt, size(phase_plasticity)
if (phase_plasticity(p) /= PLASTICITY_dislotwin_ID) cycle
@ -1306,7 +1301,7 @@ associate(prm => param(instance))
!--------------------------------------------------------------------------------------------------
! Shear banding (shearband) part
if(dNeq0(prm%sbVelocity) .and. dNeq0(prm%sbResistance)) then
if(dNeq0(prm%sbVelocity)) then
gdot_sb = 0.0_pReal
dgdot_dtausb = 0.0_pReal
call math_eigenValuesVectorsSym(math_Mandel6to33(Tstar_v),eigValues,eigVectors,error)