223031012
/
DAMASK_EICMD
mirror of https://github.com/achalhp/DAMASK_EICMD.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
DAMASK_EICMD/code/makefile

118 lines
4.4 KiB
Makefile
Raw Normal View History

removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
# Makefile to compile the Material subroutine for BVP solution using spectral method
changed makefile: material subroutines are now compiled using openmp, enabled linux threads for fftw3 (also did some slight changes to enable that in the fortran source code) renamed mpie_spectral2.f90 to mpie_spectral2d.f90 (testing file, not properly working at the moment) changed file extension and variable names in mpie_spectral.f90 and mpie_spectral_interface.f90 from "mesh" to "geom". Removed direct output from mpie_spectral.f90, all output is now base on materialpoint_results(:,1,:)
2011-01-07 18:26:45 +05:30
#
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
# use switch on make to determine precision, e.g make precision=single
# default is precision=double
# be sure to remove all librarys with different precision (make clean)
#
changed makefile: material subroutines are now compiled using openmp, enabled linux threads for fftw3 (also did some slight changes to enable that in the fortran source code) renamed mpie_spectral2.f90 to mpie_spectral2d.f90 (testing file, not properly working at the moment) changed file extension and variable names in mpie_spectral.f90 and mpie_spectral_interface.f90 from "mesh" to "geom". Removed direct output from mpie_spectral.f90, all output is now base on materialpoint_results(:,1,:)
2011-01-07 18:26:45 +05:30
# Uses openmp to parallelise the material subroutines (set number of cores with "export MPIE_NUM_THREADS=n" to n)
# Uses linux threads to parallelise fftw3 (should also be possible with openmp)
# Besides of the f90 files written at MPIE, the two library files of fftw3 "libfftw3_threads.a" "libfftw3.a" are also needed
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
# Install fftw3 (v3.2.2 is tested) with "./configure --enable-threads --enable-float" and "make", "make install" is not needed
changed makefile: material subroutines are now compiled using openmp, enabled linux threads for fftw3 (also did some slight changes to enable that in the fortran source code) renamed mpie_spectral2.f90 to mpie_spectral2d.f90 (testing file, not properly working at the moment) changed file extension and variable names in mpie_spectral.f90 and mpie_spectral_interface.f90 from "mesh" to "geom". Removed direct output from mpie_spectral.f90, all output is now base on materialpoint_results(:,1,:)
2011-01-07 18:26:45 +05:30
# as long as the two library files are copied to the source code directory.
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
COMPILE_HEAP = -openmp -c -O3 -fpp -heap-arrays 500000000
COMPILE = -openmp -c -O3 -fpp
introduced variables for compiler options added -fpp switch to invoke precompiler
2011-03-29 13:25:38 +05:30
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
precision :=double
ifeq ($(precision),single)
new substructure with 'include' and 'config' directories renaming of mpie_... to DAMASK for main usersubroutines extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 22:08:45 +05:30
DAMASK_spectral_single.exe: DAMASK_spectral_single.o CPFEM.a
ifort -openmp -o DAMASK_spectral_single.exe DAMASK_spectral_single.o CPFEM.a include/libfftw3f_threads.a include/libfftw3f.a constitutive.a advanced.a basics.a -lpthread
DAMASK_spectral_single.o: DAMASK_spectral_single.f90 CPFEM.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) DAMASK_spectral_single.f90
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
else
new substructure with 'include' and 'config' directories renaming of mpie_... to DAMASK for main usersubroutines extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 22:08:45 +05:30
DAMASK_spectral.exe: DAMASK_spectral.o CPFEM.a
ifort -openmp -o DAMASK_spectral.exe DAMASK_spectral.o CPFEM.a include/libfftw3_threads.a include/libfftw3.a constitutive.a advanced.a basics.a -lpthread
DAMASK_spectral.o: DAMASK_spectral.f90 CPFEM.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) DAMASK_spectral.f90
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
endif
extended IO to cope with different name for solverJob and Model polishing, added error codes added FFTW library files
2011-02-21 20:07:38 +05:30
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
CPFEM.a: CPFEM.o
ar rc CPFEM.a homogenization.o homogenization_RGC.o homogenization_isostrain.o crystallite.o CPFEM.o constitutive.o
CPFEM.o: CPFEM.f90 homogenization.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) CPFEM.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
homogenization.o: homogenization.f90 homogenization_isostrain.o homogenization_RGC.o crystallite.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) homogenization.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
homogenization_RGC.o: homogenization_RGC.f90 constitutive.a
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) homogenization_RGC.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
homogenization_isostrain.o: homogenization_isostrain.f90 basics.a advanced.a
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) homogenization_isostrain.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
crystallite.o: crystallite.f90 constitutive.a
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) crystallite.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
constitutive.a: constitutive.o
ar rc constitutive.a constitutive.o constitutive_titanmod.o constitutive_nonlocal.o constitutive_dislotwin.o constitutive_j2.o constitutive_phenopowerlaw.o basics.a advanced.a
constitutive.o: constitutive.f90 constitutive_titanmod.o constitutive_nonlocal.o constitutive_dislotwin.o constitutive_j2.o constitutive_phenopowerlaw.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) constitutive.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
constitutive_titanmod.o: constitutive_titanmod.f90 basics.a advanced.a
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) constitutive_titanmod.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
constitutive_nonlocal.o: constitutive_nonlocal.f90 basics.a advanced.a
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) constitutive_nonlocal.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
constitutive_dislotwin.o: constitutive_dislotwin.f90 basics.a advanced.a
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) constitutive_dislotwin.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
constitutive_j2.o: constitutive_j2.f90 basics.a advanced.a
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) constitutive_j2.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
constitutive_phenopowerlaw.o: constitutive_phenopowerlaw.f90 basics.a advanced.a
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) constitutive_phenopowerlaw.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
some polishing for single precision version. Now only prec and mpie_spectral are needed in different versions
2011-02-25 18:11:46 +05:30
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
advanced.a: lattice.o
ar rc advanced.a FEsolving.o mesh.o material.o lattice.o
some polishing for single precision version. Now only prec and mpie_spectral are needed in different versions
2011-02-25 18:11:46 +05:30
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
lattice.o: lattice.f90 material.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) lattice.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
material.o: material.f90 mesh.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) material.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
mesh.o: mesh.f90 FEsolving.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) mesh.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
FEsolving.o: FEsolving.f90 basics.a
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE_HEAP) FEsolving.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
ifeq ($(precision),single)
basics.a: debug.o math.o
new substructure with 'include' and 'config' directories renaming of mpie_... to DAMASK for main usersubroutines extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 22:08:45 +05:30
ar rc basics.a debug.o math.o numerics.o IO.o DAMASK_spectral_interface.o prec_single.o
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
else
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
basics.a: debug.o math.o
new substructure with 'include' and 'config' directories renaming of mpie_... to DAMASK for main usersubroutines extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 22:08:45 +05:30
ar rc basics.a debug.o math.o numerics.o IO.o DAMASK_spectral_interface.o prec.o
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
endif
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
debug.o: debug.f90 numerics.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE) debug.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
math.o: math.f90 numerics.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE) math.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
numerics.o: numerics.f90 IO.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE) numerics.f90
new substructure with 'include' and 'config' directories renaming of mpie_... to DAMASK for main usersubroutines extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 22:08:45 +05:30
IO.o: IO.f90 DAMASK_spectral_interface.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE) IO.f90
some polishing for single precision version. Now only prec and mpie_spectral are needed in different versions
2011-02-25 18:11:46 +05:30
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
ifeq ($(precision),single)
new substructure with 'include' and 'config' directories renaming of mpie_... to DAMASK for main usersubroutines extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 22:08:45 +05:30
DAMASK_spectral_interface.o: DAMASK_spectral_interface.f90 prec_single.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE) DAMASK_spectral_interface.f90
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
prec_single.o: prec_single.f90
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE) prec_single.f90
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
else
new substructure with 'include' and 'config' directories renaming of mpie_... to DAMASK for main usersubroutines extension of element outputs from 5 to 8 digits (FFT!!!)
2011-05-11 22:08:45 +05:30
DAMASK_spectral_interface.o: DAMASK_spectral_interface.f90 prec.o
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE) DAMASK_spectral_interface.f90
added fftw3 as fft(library will not versioned, should be in a linkable folder) , did some corrections on the code, splitted main file up (allows use of makefile), added makefile changes on mpie_spectral.f90: new structure, changed variable names, now using defgrad instead of disgrad, cleaned up, removed augmented Lagrange. ToDo: Implement Augmented Lagrange again (but then a working version), implement Large strain, think about complex-to real-transform backwards, try to implement MP-support
2010-08-27 22:09:38 +05:30
prec.o: prec.f90
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
ifort $(COMPILE) prec.f90
removed all math functions only for double precision by the more flexible counterpart, e.g. "dsqrt --> sqrt", "dsin --> sin". Should not cause any harm, as long as "implicit none" is used. Now it is possible to compile a single precision spectral solver/crystal plasticity by replacing mesh.f90 and prec.f90 with mesh_single.f90 and prec_single.f90. For the spectral method, just call "make precision=single" instead of "make". Use "make clean" evertime you switch precision
2011-02-25 14:55:53 +05:30
endif
clean:
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
rm -rf *.o
some polishing for single precision version. Now only prec and mpie_spectral are needed in different versions
2011-02-25 18:11:46 +05:30
rm -rf *.mod
changed input of loadcase. Now fdot (time derivative) can be used instead of velocity gradient. Velocity gradient needs to have each line fully or not at all defined, as for other loadcases the stress BCs are not known in advance. Also added the possibility to keep guessing along trajectory of former loadcase. changed back to use the compliance of initial linear material behavior. added counter of non-converged steps renamed compiler flags in makefile
2011-07-13 22:03:12 +05:30
rm -rf *.a