223031012
/
DAMASK_EICMD
mirror of https://github.com/achalhp/DAMASK_EICMD.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
DAMASK_EICMD/code/CPFEM.f90

653 lines
31 KiB
Fortran
Raw Normal View History

changed enconding of all source files to UTF-8 without BOM (signature) Codepage 65001
2011-04-07 12:50:28 +05:30
! Copyright 2011 Max-Planck-Institut für Eisenforschung GmbH
added copyright text to all f90 (free) format files
2011-04-04 19:39:54 +05:30
!
! This file is part of DAMASK,
added doxygen comments, some polishing, added "protected" statements where applicable
2012-10-02 18:23:25 +05:30
! the Düsseldorf Advanced Material Simulation Kit.
added copyright text to all f90 (free) format files
2011-04-04 19:39:54 +05:30
!
! DAMASK is free software: you can redistribute it and/or modify
! it under the terms of the GNU General Public License as published by
! the Free Software Foundation, either version 3 of the License, or
! (at your option) any later version.
!
! DAMASK is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! GNU General Public License for more details.
!
! You should have received a copy of the GNU General Public License
! along with DAMASK. If not, see <http://www.gnu.org/licenses/>.
!
!##############################################################
added version information to all files do NOT edit text like this: $Id: constitutive_phenopowerlaw.f90 406 2009-08-31 14:13:10Z MPIE\f.roters $
2009-08-31 20:39:15 +05:30
!* $Id$
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
!##############################################################
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
MODULE CPFEM
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
!##############################################################
! *** CPFEM engine ***
!
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
use prec, only: pReal
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
implicit none
real(pReal), parameter :: CPFEM_odd_stress = 1e15_pReal, &
CPFEM_odd_jacobian = 1e50_pReal
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
added doxygen comments, some polishing, added "protected" statements where applicable
2012-10-02 18:23:25 +05:30
real(pReal), dimension (:,:,:), allocatable :: CPFEM_cs !> Cauchy stress
real(pReal), dimension (:,:,:,:), allocatable :: CPFEM_dcsdE !> Cauchy stress tangent
real(pReal), dimension (:,:,:,:), allocatable :: CPFEM_dcsdE_knownGood !> known good tangent
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
added doxygen comments, some polishing, added "protected" statements where applicable
2012-10-02 18:23:25 +05:30
logical :: CPFEM_init_done = .false., & !> remember whether init has been done already
CPFEM_init_inProgress = .false., & !> remember whether first IP is currently performing init
CPFEM_calc_done = .false. !> remember whether first IP has already calced the results
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
CONTAINS
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
!*********************************************************
!*** call (thread safe) all module initializations ***
!*********************************************************
subroutine CPFEM_initAll(Temperature,element,IP)
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
use prec, only: prec_init, &
pInt
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
use numerics, only: numerics_init
use debug, only: debug_init
use FEsolving, only: FE_init
use math, only: math_init
use mesh, only: mesh_init
use lattice, only: lattice_init
use material, only: material_init
use constitutive, only: constitutive_init
use crystallite, only: crystallite_init
use homogenization, only: homogenization_init
use IO, only: IO_init
renamed interface from "mpie_interface" to "DAMASK_interface"
2011-05-11 22:31:03 +05:30
use DAMASK_interface
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
implicit none
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
integer(pInt), intent(in) :: element, & ! FE element number
IP ! FE integration point number
real(pReal), intent(in) :: Temperature ! temperature
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
real(pReal) rnd
integer(pInt) i,n
! initialization step (three dimensional stress state check missing?)
if (.not. CPFEM_init_done) then
call random_number(rnd)
do i=1,int(256.0*rnd)
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
n = n+1_pInt ! wasting random amount of time...
enddo ! ...to break potential race in multithreading
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
n = n+1_pInt
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
if (.not. CPFEM_init_inProgress) then ! yes my thread won!
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
CPFEM_init_inProgress = .true.
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
#ifdef Spectral
call DAMASK_interface_init() ! Spectral solver is interfacing to commandline
#endif
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
call prec_init
call IO_init
call numerics_init
call debug_init
call math_init
call FE_init
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
call mesh_init(IP, element) ! pass on coordinates to alter calcMode of first ip
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
call lattice_init
call material_init
call constitutive_init
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
call crystallite_init(Temperature) ! (have to) use temperature of first IP for whole model
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
call homogenization_init(Temperature)
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
call CPFEM_init
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
#ifndef Spectral
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
call DAMASK_interface_init() ! Spectral solver init is already done
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
#endif
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
CPFEM_init_done = .true.
CPFEM_init_inProgress = .false.
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
else ! loser, loser...
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
do while (CPFEM_init_inProgress)
enddo
endif
endif
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
end subroutine CPFEM_initAll
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
!*********************************************************
!*** allocate the arrays defined in module CPFEM ***
!*** and initialize them ***
!*********************************************************
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
subroutine CPFEM_init
again: adding pInt, removing redundant use statments, chang in dble to real(,pReal)
2012-02-21 22:01:37 +05:30
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
use, intrinsic :: iso_fortran_env ! to get compiler_version and compiler_options (at least for gfortran 4.6 at the moment)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
use prec, only: pInt
changed variable name "debug_what" to "debug_level"
2012-07-05 15:24:50 +05:30
use debug, only: debug_level, &
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
debug_CPFEM, &
changed the majority of debugging output to level "extensive"
2012-07-24 20:59:23 +05:30
debug_levelBasic, &
debug_levelExtensive
fixed reading/writing of integer arrays with function for real arrays
2012-08-16 20:25:23 +05:30
use IO, only: IO_read_jobBinaryFile,&
IO_read_jobBinaryIntFile
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
use FEsolving, only: parallelExecution, &
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
symmetricSolver, &
restartRead, &
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
modelName
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
use mesh, only: mesh_NcpElems, &
mesh_maxNips
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
use material, only: homogenization_maxNgrains, &
material_phase
use constitutive, only: constitutive_state0
use crystallite, only: crystallite_F0, &
crystallite_Fp0, &
crystallite_Lp0, &
crystallite_dPdF0, &
crystallite_Tstar0_v
use homogenization, only: homogenization_sizeState, &
again: adding pInt, removing redundant use statments, chang in dble to real(,pReal)
2012-02-21 22:01:37 +05:30
homogenization_state0
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
implicit none
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
integer(pInt) i,j,k,l,m
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! initialize stress and jacobian to zero
allocate(CPFEM_cs(6,mesh_maxNips,mesh_NcpElems)) ; CPFEM_cs = 0.0_pReal
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
allocate(CPFEM_dcsdE(6,6,mesh_maxNips,mesh_NcpElems)) ; CPFEM_dcsdE = 0.0_pReal
allocate(CPFEM_dcsdE_knownGood(6,6,mesh_maxNips,mesh_NcpElems)) ; CPFEM_dcsdE_knownGood = 0.0_pReal
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
! *** restore the last converged values of each essential variable from the binary file
if (restartRead) then
changed the majority of debugging output to level "extensive"
2012-07-24 20:59:23 +05:30
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
!$OMP CRITICAL (write2out)
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
write(6,'(a)') '<< CPFEM >> restored state variables of last converged step from binary files'
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
!$OMP END CRITICAL (write2out)
endif
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
fixed reading/writing of integer arrays with function for real arrays
2012-08-16 20:25:23 +05:30
call IO_read_jobBinaryIntFile(777,'recordedPhase',modelName,size(material_phase))
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
read (777,rec=1) material_phase
close (777)
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
call IO_read_jobBinaryFile(777,'convergedF',modelName,size(crystallite_F0))
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
read (777,rec=1) crystallite_F0
close (777)
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
call IO_read_jobBinaryFile(777,'convergedFp',modelName,size(crystallite_Fp0))
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
read (777,rec=1) crystallite_Fp0
close (777)
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
call IO_read_jobBinaryFile(777,'convergedLp',modelName,size(crystallite_Lp0))
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
read (777,rec=1) crystallite_Lp0
close (777)
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
call IO_read_jobBinaryFile(777,'convergeddPdF',modelName,size(crystallite_dPdF0))
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
read (777,rec=1) crystallite_dPdF0
close (777)
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
call IO_read_jobBinaryFile(777,'convergedTstar',modelName,size(crystallite_Tstar0_v))
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
read (777,rec=1) crystallite_Tstar0_v
close (777)
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
call IO_read_jobBinaryFile(777,'convergedStateConst',modelName)
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
m = 0_pInt
do i = 1,homogenization_maxNgrains; do j = 1,mesh_maxNips; do k = 1,mesh_NcpElems
do l = 1,size(constitutive_state0(i,j,k)%p)
m = m+1_pInt
read(777,rec=m) constitutive_state0(i,j,k)%p(l)
enddo
enddo; enddo; enddo
close (777)
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
call IO_read_jobBinaryFile(777,'convergedStateHomog',modelName)
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
m = 0_pInt
do k = 1,mesh_NcpElems; do j = 1,mesh_maxNips
do l = 1,homogenization_sizeState(j,k)
m = m+1_pInt
read(777,rec=m) homogenization_state0(j,k)%p(l)
enddo
enddo; enddo
close (777)
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
call IO_read_jobBinaryFile(777,'convergeddcsdE',modelName,size(CPFEM_dcsdE))
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
read (777,rec=1) CPFEM_dcsdE
close (777)
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
restartRead = .false.
endif
! *** end of restoring
added doxygen documentation to material.f90 and marked read-only quantities as protected where possible, removed substituted "call flush" by "flush"
2013-01-18 17:00:52 +05:30
write(6,'(/,a)') '<<<+- CPFEM init -+>>>'
write(6,'(a)') '$Id$'
made code standard conform to Fortran 2008 (ignoring warning concerning comments beyond character 132). Basically, changing "x" format specifier to "Nx" ("1x") plus removing $ format specifier added compiler switches for gfortran and ifort to check for standard conformity old gnu compilers <4.4 are not longer supported because they don't provide the c binding for fftw
2012-02-01 00:48:55 +05:30
#include "compilation_info.f90"
added doxygen documentation to material.f90 and marked read-only quantities as protected where possible, removed substituted "call flush" by "flush"
2013-01-18 17:00:52 +05:30
if (iand(debug_level(debug_CPFEM), debug_levelBasic) /= 0) then
write(6,'(a32,1x,6(i8,1x))') 'CPFEM_cs: ', shape(CPFEM_cs)
write(6,'(a32,1x,6(i8,1x))') 'CPFEM_dcsdE: ', shape(CPFEM_dcsdE)
write(6,'(a32,1x,6(i8,1x))') 'CPFEM_dcsdE_knownGood: ', shape(CPFEM_dcsdE_knownGood)
debugging output is now controlled by the "verbosity" parameter in the debug.config ranging from 0 (=almost no output) to 8 (=very detailed output) 0 : only version infos and all from "hypela2"/"umat" 1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info 2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines 3 : basic outputs from "homogenization.f90" 4 : extensive outputs from "homogenization.f90" 5 : basic outputs from "crystallite.f90" 6 : extensive outputs from "crystallite.f90" 7 : basic outputs from the constitutive files 8 : extensive outputs from the constitutive files If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
2011-03-21 16:01:17 +05:30
write(6,*)
write(6,*) 'parallelExecution: ', parallelExecution
write(6,*) 'symmetricSolver: ', symmetricSolver
added doxygen documentation to material.f90 and marked read-only quantities as protected where possible, removed substituted "call flush" by "flush"
2013-01-18 17:00:52 +05:30
endif
flush(6)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
end subroutine CPFEM_init
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
!***********************************************************************
!*** perform initialization at first call, update variables and ***
!*** call the actual material model ***
!***********************************************************************
removed coordinates from call to CPFEM_general and introduced direct storage of coordinates to mesh_ipCoordinates
2012-11-14 20:08:10 +05:30
subroutine CPFEM_general(mode, ffn, ffn1, Temperature, dt, element, IP, cauchyStress,&
cpfe_general now returns also Kirchhoff-stress P and dPdF added dummy variables P and dPdF to mpie_cpfe_* to be able to call cpfem_general correctly
2010-07-07 15:28:18 +05:30
& jacobian, pstress, dPdF)
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
! note: cauchyStress = Cauchy stress cs(6) and jacobian = Consistent tangent dcs/dE
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
!*** variables and functions from other modules ***!
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
use prec, only: pInt
use numerics, only: defgradTolerance, &
removed coordinates from call to CPFEM_general and introduced direct storage of coordinates to mesh_ipCoordinates
2012-11-14 20:08:10 +05:30
iJacoStiffness
changed variable name "debug_what" to "debug_level"
2012-07-05 15:24:50 +05:30
use debug, only: debug_level, &
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
debug_CPFEM, &
debug_levelBasic, &
changed the majority of debugging output to level "extensive"
2012-07-24 20:59:23 +05:30
debug_levelExtensive, &
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
debug_levelSelective, &
debug_e, &
debug_i, &
debug_stressMaxLocation, &
debug_stressMinLocation, &
debug_jacobianMaxLocation, &
debug_jacobianMinLocation, &
debug_stressMax, &
debug_stressMin, &
debug_jacobianMax, &
debug_jacobianMin
use FEsolving, only: parallelExecution, &
outdatedFFN1, &
terminallyIll, &
cycleCounter, &
theInc, &
theTime, &
theDelta, &
FEsolving_execElem, &
FEsolving_execIP, &
restartWrite
use math, only: math_identity2nd, &
math_mul33x33, &
math_det33, &
math_transpose33, &
math_I3, &
math_Mandel3333to66, &
math_Mandel66to3333, &
math_Mandel33to6, &
math_Mandel6to33
use mesh, only: mesh_FEasCP, &
mesh_NcpElems, &
mesh_maxNips, &
mesh_element, &
FE_Nips, &
switched element library to geomType based. saves to copy same geometry description for different elements that are essentially similar regarding the IP number but differ in total node count. introduced quadratic tetrahedron (Marc element 127 -- element 157 might also work, but did not perform well in fully elastic calc so far)
2012-11-16 04:15:20 +05:30
FE_Nnodes, &
FE_geomtype
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
use material, only: homogenization_maxNgrains, &
microstructure_elemhomo, &
material_phase
use constitutive, only: constitutive_state0,constitutive_state
use crystallite, only: crystallite_partionedF,&
crystallite_F0, &
crystallite_Fp0, &
crystallite_Fp, &
crystallite_Lp0, &
crystallite_Lp, &
crystallite_dPdF0, &
crystallite_dPdF, &
crystallite_Tstar0_v, &
crystallite_Tstar_v
use homogenization, only: homogenization_sizeState, &
homogenization_state, &
homogenization_state0, &
materialpoint_F, &
materialpoint_F0, &
materialpoint_P, &
materialpoint_dPdF, &
materialpoint_results, &
materialpoint_sizeResults, &
materialpoint_Temperature, &
materialpoint_stressAndItsTangent, &
materialpoint_postResults
use IO, only: IO_write_jobBinaryFile, &
IO_warning
renamed interface from "mpie_interface" to "DAMASK_interface"
2011-05-11 22:31:03 +05:30
use DAMASK_interface
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
implicit none
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
!*** input variables ***!
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
integer(pInt), intent(in) :: element, & ! FE element number
IP ! FE integration point number
real(pReal), intent(inout) :: Temperature ! temperature
real(pReal), intent(in) :: dt ! time increment
real(pReal), dimension (3,3), intent(in) :: ffn, & ! deformation gradient for t=t0
ffn1 ! deformation gradient for t=t1
integer(pInt), intent(in) :: mode ! computation mode 1: regular computation plus aging of results
! 2: regular computation
! 3: collection of FEM data
! 4: backup tangent from former converged inc
! 5: restore tangent from former converged inc
! 6: recycling of former results (MARC speciality)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
!*** output variables ***!
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
real(pReal), dimension(6), intent(out) :: cauchyStress ! stress vector in Mandel notation
real(pReal), dimension(6,6), intent(out) :: jacobian ! jacobian in Mandel notation
real(pReal), dimension (3,3), intent(out) :: pstress ! Piola-Kirchhoff stress in Matrix notation
real(pReal), dimension (3,3,3,3), intent(out) :: dPdF !
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
!*** local variables ***!
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
real(pReal) J_inverse, & ! inverse of Jacobian
Introduce a randomness in the odd stress, using pre-factor rnd.
2009-12-09 16:03:00 +05:30
rnd
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
real(pReal), dimension (3,3) :: Kirchhoff, & ! Piola-Kirchhoff stress in Matrix notation
cauchyStress33 ! stress vector in Matrix notation
cpfe_general now returns also Kirchhoff-stress P and dPdF added dummy variables P and dPdF to mpie_cpfe_* to be able to call cpfem_general correctly
2010-07-07 15:28:18 +05:30
real(pReal), dimension (3,3,3,3) :: H_sym, &
extreme values of stress and jacobian now recorded in CPFEM_general. variable declaration and generation of output moved to debug module.
2011-03-17 18:43:13 +05:30
H, &
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
jacobian3333 ! jacobian in Matrix notation
integer(pInt) cp_en, & ! crystal plasticity element number
i, j, k, l, m, n, e
logical updateJaco ! flag indicating if JAcobian has to be updated
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
cp_en = mesh_FEasCP('elem',element)
changed variable name "debug_what" to "debug_level"
2012-07-05 15:24:50 +05:30
if (iand(debug_level(debug_CPFEM), debug_levelBasic) /= 0_pInt .and. cp_en == 1 .and. IP == 1) then
new numerics parameter "defgradTolerance" replaces "relevantStrain" in cpfem, since "relevantStrain" is also used in crystallite but in a different context. "defgradTolerance" gets the same standard value as "relevantStrain" so calculations should be consistent with older ones
2010-05-20 20:25:11 +05:30
!$OMP CRITICAL (write2out)
added doxygen documentation to material.f90 and marked read-only quantities as protected where possible, removed substituted "call flush" by "flush"
2013-01-18 17:00:52 +05:30
write(6,'(/,a)') '#############################################'
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
write(6,'(a1,a22,1x,f15.7,a6)') '#','theTime', theTime, '#'
write(6,'(a1,a22,1x,f15.7,a6)') '#','theDelta', theDelta, '#'
write(6,'(a1,a22,1x,i8,a13)') '#','theInc', theInc, '#'
write(6,'(a1,a22,1x,i8,a13)') '#','cycleCounter', cycleCounter, '#'
write(6,'(a1,a22,1x,i8,a13)') '#','computationMode',mode, '#'
added doxygen documentation to material.f90 and marked read-only quantities as protected where possible, removed substituted "call flush" by "flush"
2013-01-18 17:00:52 +05:30
write(6,'(a,/)') '#############################################'
flush (6)
new numerics parameter "defgradTolerance" replaces "relevantStrain" in cpfem, since "relevantStrain" is also used in crystallite but in a different context. "defgradTolerance" gets the same standard value as "relevantStrain" so calculations should be consistent with older ones
2010-05-20 20:25:11 +05:30
!$OMP END CRITICAL (write2out)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
endif
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
!*** according to our "mode" we decide what to do
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
select case (mode)
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
! --+>> REGULAR COMPUTATION (WITH AGING OF RESULTS IF MODE == 1) <<+--
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
case (1,2,8,9)
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
!*** age results
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
if (mode == 1 .or. mode == 8) then
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
crystallite_F0 = crystallite_partionedF ! crystallite deformation (_subF is perturbed...)
crystallite_Fp0 = crystallite_Fp ! crystallite plastic deformation
crystallite_Lp0 = crystallite_Lp ! crystallite plastic velocity
crystallite_dPdF0 = crystallite_dPdF ! crystallite stiffness
crystallite_Tstar0_v = crystallite_Tstar_v ! crystallite 2nd Piola Kirchhoff stress
quite some changes: # non-greedy memory allocation # generation of outputConstitutive to allow for script-based T16 extraction # exchange of phenomenological by more general phenopowerlaw # lattice is based on slip and twin families which can be treated as individual entities (switched on/off, separate hardening, etc.) # nicer debugging output # changed some error/warning codes # plus potentially some minor additional brushes here and there
2009-07-22 21:37:19 +05:30
forall ( i = 1:homogenization_maxNgrains, &
j = 1:mesh_maxNips, &
k = 1:mesh_NcpElems ) &
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
constitutive_state0(i,j,k)%p = constitutive_state(i,j,k)%p ! microstructure of crystallites
changed the majority of debugging output to level "extensive"
2012-07-24 20:59:23 +05:30
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
added flag verboseDebugger to debug in order to have more control about debugging statements set this to true if you want extended debugging info in the output file
2010-03-19 19:44:08 +05:30
!$OMP CRITICAL (write2out)
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
write(6,'(a)') '<< CPFEM >> aging states'
corrected debug output of aged state: first reports for selected debug_el,debug_ip
2012-12-28 17:45:59 +05:30
if (debug_e <= mesh_NcpElems .and. debug_i <= mesh_maxNips) then
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
write(6,'(a,1x,i8,1x,i2,1x,i4,/,(12x,6(e20.8,1x)))') '<< CPFEM >> aged state of el ip grain',&
corrected debug output of aged state: first reports for selected debug_el,debug_ip
2012-12-28 17:45:59 +05:30
debug_e, debug_i, 1, constitutive_state(1,debug_i,debug_e)%p
* removed last remnants of old debugger * replaced "dble" intrinsic function by "real" with pReal kind in constitutive_nonlocal.f90 * removed useless line breaks in output of state in CPFEM.f90
2011-04-04 14:04:52 +05:30
write(6,*)
debugging output is now controlled by the "verbosity" parameter in the debug.config ranging from 0 (=almost no output) to 8 (=very detailed output) 0 : only version infos and all from "hypela2"/"umat" 1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info 2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines 3 : basic outputs from "homogenization.f90" 4 : extensive outputs from "homogenization.f90" 5 : basic outputs from "crystallite.f90" 6 : extensive outputs from "crystallite.f90" 7 : basic outputs from the constitutive files 8 : extensive outputs from the constitutive files If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
2011-03-21 16:01:17 +05:30
endif
added flag verboseDebugger to debug in order to have more control about debugging statements set this to true if you want extended debugging info in the output file
2010-03-19 19:44:08 +05:30
!$OMP END CRITICAL (write2out)
endif
* Introduced preprocessor directives in order to suppress compilation of most write statements when using openmp. This tremendously improves efficiency of parallelization. * Also added some more openmp directives to increase percentage of parallelized code. * "implicit none" was missing in two subroutines of homogenization and constitutive.
2011-03-29 12:57:19 +05:30
!$OMP PARALLEL DO
do k = 1,mesh_NcpElems
do j = 1,mesh_maxNips
if (homogenization_sizeState(j,k) > 0_pInt) &
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
homogenization_state0(j,k)%p = homogenization_state(j,k)%p ! internal state of homogenization scheme
* Introduced preprocessor directives in order to suppress compilation of most write statements when using openmp. This tremendously improves efficiency of parallelization. * Also added some more openmp directives to increase percentage of parallelized code. * "implicit none" was missing in two subroutines of homogenization and constitutive.
2011-03-29 12:57:19 +05:30
enddo
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
enddo
* Introduced preprocessor directives in order to suppress compilation of most write statements when using openmp. This tremendously improves efficiency of parallelization. * Also added some more openmp directives to increase percentage of parallelized code. * "implicit none" was missing in two subroutines of homogenization and constitutive.
2011-03-29 12:57:19 +05:30
!$OMP END PARALLEL DO
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
! * dump the last converged values of each essential variable to a binary file
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
if (restartWrite) then
changed the majority of debugging output to level "extensive"
2012-07-24 20:59:23 +05:30
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
!$OMP CRITICAL (write2out)
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
write(6,'(a)') '<< CPFEM >> writing state variables of last converged step to binary files'
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
!$OMP END CRITICAL (write2out)
endif
reordered (and partly redistributed) error message identifiers, deleted those which are not in use anymore. all constitutive as well numerics now raises an error, if an unknown keyword is found in the respective config file
2012-02-13 23:11:27 +05:30
call IO_write_jobBinaryFile(777,'recordedPhase',size(material_phase))
write (777,rec=1) material_phase
close (777)
call IO_write_jobBinaryFile(777,'convergedF',size(crystallite_F0))
write (777,rec=1) crystallite_F0
close (777)
call IO_write_jobBinaryFile(777,'convergedFp',size(crystallite_Fp0))
write (777,rec=1) crystallite_Fp0
close (777)
call IO_write_jobBinaryFile(777,'convergedLp',size(crystallite_Lp0))
write (777,rec=1) crystallite_Lp0
close (777)
call IO_write_jobBinaryFile(777,'convergeddPdF',size(crystallite_dPdF0))
write (777,rec=1) crystallite_dPdF0
close (777)
call IO_write_jobBinaryFile(777,'convergedTstar',size(crystallite_Tstar0_v))
write (777,rec=1) crystallite_Tstar0_v
close (777)
call IO_write_jobBinaryFile(777,'convergedStateConst')
m = 0_pInt
do i = 1,homogenization_maxNgrains; do j = 1,mesh_maxNips; do k = 1,mesh_NcpElems
do l = 1,size(constitutive_state0(i,j,k)%p)
m = m+1_pInt
write(777,rec=m) constitutive_state0(i,j,k)%p(l)
enddo
enddo; enddo; enddo
close (777)
call IO_write_jobBinaryFile(777,'convergedStateHomog')
m = 0_pInt
do k = 1,mesh_NcpElems; do j = 1,mesh_maxNips
do l = 1,homogenization_sizeState(j,k)
m = m+1_pInt
write(777,rec=m) homogenization_state0(j,k)%p(l)
enddo
enddo; enddo
close (777)
call IO_write_jobBinaryFile(777,'convergeddcsdE',size(CPFEM_dcsdE))
write (777,rec=1) CPFEM_dcsdE
close (777)
Introducing the capability to restart jobs that crashed in the middle of sims. At the moment, this feature is exclusive for Marc. Major changes: CPFEM.f90 => 1. Moving the initialization out of CPFEM_general into a separate subroutine, which is directly called by the hypela2 (Beware, the Abaqus version must also be modified in order to adapt with this change). 2. Restore primary state variables in CPFEM_init from binary files when requested (Marc flag: restart read). 3. Writing primary state variables into binary files (Marc flag: restart write). FEsolving.f90 => 1. Adding functions to recognize Marc restart flags: read and write and the corresponding restart file (parent job). 2. Change the initial value of cycleCounter = -1 in conjuction with the change made the ping-pong scheme homogenization_RGC.f90 => 1. Just syntax polishing. IO.f90 => 1. Adding functions/subroutines to open binary files for writing the primary state variables for restart purpose. mpie_cpfem_marc.f90 1. Modification of the general scheme for collection and calculation in order to accommodate the newly added restart feature.
2010-11-03 20:09:18 +05:30
endif
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
! * end of dumping
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
endif
reordered initialization for spectral method, corrected bug of deformation BC parsing when prescribing velocity gradient resulting in wrong average deformation
2012-07-30 21:21:48 +05:30
if (mode == 8 .or. mode == 9) then ! Abaqus explicit skips collect
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
materialpoint_Temperature(IP,cp_en) = Temperature
materialpoint_F0(1:3,1:3,IP,cp_en) = ffn
materialpoint_F(1:3,1:3,IP,cp_en) = ffn1
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
endif
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
!*** deformation gradient outdated or any actual deformation gradient differs more than relevantStrain from the stored one
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
if (terminallyIll .or. outdatedFFN1 .or. any(abs(ffn1 - materialpoint_F(1:3,1:3,IP,cp_en)) > defgradTolerance)) then
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
! if (.not. terminallyIll .and. .not. outdatedFFN1) then
if (any(abs(ffn1 - materialpoint_F(1:3,1:3,IP,cp_en)) > defgradTolerance)) then
changed the majority of debugging output to level "extensive"
2012-07-24 20:59:23 +05:30
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
debugging output is now controlled by the "verbosity" parameter in the debug.config ranging from 0 (=almost no output) to 8 (=very detailed output) 0 : only version infos and all from "hypela2"/"umat" 1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info 2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines 3 : basic outputs from "homogenization.f90" 4 : extensive outputs from "homogenization.f90" 5 : basic outputs from "crystallite.f90" 6 : extensive outputs from "crystallite.f90" 7 : basic outputs from the constitutive files 8 : extensive outputs from the constitutive files If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
2011-03-21 16:01:17 +05:30
!$OMP CRITICAL (write2out)
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
write(6,'(a,1x,i8,1x,i2)') '<< CPFEM >> OUTDATED at el ip',cp_en,IP
made code standard conform to Fortran 2008 (ignoring warning concerning comments beyond character 132). Basically, changing "x" format specifier to "Nx" ("1x") plus removing $ format specifier added compiler switches for gfortran and ifort to check for standard conformity old gnu compilers <4.4 are not longer supported because they don't provide the c binding for fftw
2012-02-01 00:48:55 +05:30
write(6,'(a,/,3(12x,3(f10.6,1x),/))') '<< CPFEM >> FFN1 old:',math_transpose33(materialpoint_F(1:3,1:3,IP,cp_en))
write(6,'(a,/,3(12x,3(f10.6,1x),/))') '<< CPFEM >> FFN1 now:',math_transpose33(ffn1)
debugging output is now controlled by the "verbosity" parameter in the debug.config ranging from 0 (=almost no output) to 8 (=very detailed output) 0 : only version infos and all from "hypela2"/"umat" 1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info 2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines 3 : basic outputs from "homogenization.f90" 4 : extensive outputs from "homogenization.f90" 5 : basic outputs from "crystallite.f90" 6 : extensive outputs from "crystallite.f90" 7 : basic outputs from the constitutive files 8 : extensive outputs from the constitutive files If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
2011-03-21 16:01:17 +05:30
!$OMP END CRITICAL (write2out)
endif
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
outdatedFFN1 = .true.
endif
1) fixed terminallyIll bug occurring with Ngrains=1 homogenization 2) brushed up the output to be more easily readable/understandable
2010-09-02 02:34:02 +05:30
call random_number(rnd)
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
if (rnd < 0.5_pReal) rnd = rnd - 1.0_pReal
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
CPFEM_cs(1:6,IP,cp_en) = rnd*CPFEM_odd_stress
CPFEM_dcsde(1:6,1:6,IP,cp_en) = CPFEM_odd_jacobian*math_identity2nd(6)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
!*** deformation gradient is not outdated
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
else
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
updateJaco = mod(cycleCounter,iJacoStiffness) == 0
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
!* no parallel computation, so we use just one single element and IP for computation
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
if (.not. parallelExecution) then
FEsolving_execElem(1) = cp_en
FEsolving_execElem(2) = cp_en
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
if (.not. microstructure_elemhomo(mesh_element(4,cp_en)) .or. & ! calculate unless homogeneous
(microstructure_elemhomo(mesh_element(4,cp_en)) .and. IP == 1_pInt)) then ! and then only first IP
FEsolving_execIP(1,cp_en) = IP
FEsolving_execIP(2,cp_en) = IP
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
!$OMP CRITICAL (write2out)
write(6,'(a,i8,1x,i2)') '<< CPFEM >> calculation for el ip ',cp_en,IP
!$OMP END CRITICAL (write2out)
endif
call materialpoint_stressAndItsTangent(updateJaco, dt) ! calculate stress and its tangent
call materialpoint_postResults(dt) ! post results
debugging output is now controlled by the "verbosity" parameter in the debug.config ranging from 0 (=almost no output) to 8 (=very detailed output) 0 : only version infos and all from "hypela2"/"umat" 1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info 2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines 3 : basic outputs from "homogenization.f90" 4 : extensive outputs from "homogenization.f90" 5 : basic outputs from "crystallite.f90" 6 : extensive outputs from "crystallite.f90" 7 : basic outputs from the constitutive files 8 : extensive outputs from the constitutive files If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
2011-03-21 16:01:17 +05:30
endif
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
!* parallel computation and calulation not yet done
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
elseif (.not. CPFEM_calc_done) then
changed the majority of debugging output to level "extensive"
2012-07-24 20:59:23 +05:30
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
debugging output is now controlled by the "verbosity" parameter in the debug.config ranging from 0 (=almost no output) to 8 (=very detailed output) 0 : only version infos and all from "hypela2"/"umat" 1 : basic outputs from "CPFEM.f90", basic output from initialization routines, debug_info 2 : extensive outputs from "CPFEM.f90", extensive output from initialization routines 3 : basic outputs from "homogenization.f90" 4 : extensive outputs from "homogenization.f90" 5 : basic outputs from "crystallite.f90" 6 : extensive outputs from "crystallite.f90" 7 : basic outputs from the constitutive files 8 : extensive outputs from the constitutive files If verbosity is equal to zero, all counters in debug are not set during calculation (e.g. debug_StressLoopDistribution or debug_cumDotStateTicks). This might speed up parallel calculation, because all these need critical statements which extremely slow down parallel computation.
2011-03-21 16:01:17 +05:30
!$OMP CRITICAL (write2out)
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
write(6,'(a,i8,a,i8)') '<< CPFEM >> calculation for elements ',FEsolving_execElem(1),' to ',FEsolving_execElem(2)
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
!$OMP END CRITICAL (write2out)
changed output/debug-level relation for two statements
2011-06-14 19:38:13 +05:30
endif
introduced preprocessor identifiers Marc, Abaqus, and Spectral to enable conditional compilation. This allows deleted dummy functions that are used by one solver only. Mainly affected modules are IO and mesh. Most of the changes in mesh result from reordering the functions when grouping them depending on their solver. Further advantage is that FE solver do not need FFTW and kdtree2 anymore. The include files for these two libraries moved to DAMASKROO/lib now as I figured out how to use a include path in the Makefile. Put all the files I got when testing compilation with abaqus in a folder which to become the abaqus compilation test.
2012-06-15 21:40:21 +05:30
call materialpoint_stressAndItsTangent(updateJaco, dt) ! calculate stress and its tangent (parallel execution inside)
call materialpoint_postResults(dt) ! post results
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
CPFEM_calc_done = .true.
endif
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
!*** map stress and stiffness (or return odd values if terminally ill)
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
1) fixed terminallyIll bug occurring with Ngrains=1 homogenization 2) brushed up the output to be more easily readable/understandable
2010-09-02 02:34:02 +05:30
if ( terminallyIll ) then
call random_number(rnd)
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
if (rnd < 0.5_pReal) rnd = rnd - 1.0_pReal
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
CPFEM_cs(1:6,IP,cp_en) = rnd * CPFEM_odd_stress
CPFEM_dcsde(1:6,1:6,IP,cp_en) = CPFEM_odd_jacobian * math_identity2nd(6)
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
else
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
if (microstructure_elemhomo(mesh_element(4,cp_en)) .and. IP > 1_pInt) then ! me homogenous? --> copy from first IP
materialpoint_P(1:3,1:3,IP,cp_en) = materialpoint_P(1:3,1:3,1,cp_en)
materialpoint_F(1:3,1:3,IP,cp_en) = materialpoint_F(1:3,1:3,1,cp_en)
materialpoint_dPdF(1:3,1:3,1:3,1:3,IP,cp_en) = materialpoint_dPdF(1:3,1:3,1:3,1:3,1,cp_en)
materialpoint_results(1:materialpoint_sizeResults,IP,cp_en) = materialpoint_results(1:materialpoint_sizeResults,1,cp_en)
endif
* Introduced preprocessor directives in order to suppress compilation of most write statements when using openmp. This tremendously improves efficiency of parallelization. * Also added some more openmp directives to increase percentage of parallelized code. * "implicit none" was missing in two subroutines of homogenization and constitutive.
2011-03-29 12:57:19 +05:30
! translate from P to CS
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
Kirchhoff = math_mul33x33(materialpoint_P(1:3,1:3,IP,cp_en), math_transpose33(materialpoint_F(1:3,1:3,IP,cp_en)))
added new math function "math_deviatoric33" which returns the deviatoric part of a 3x3 tensor renamed some math functions, so that we have a universal naming scheme: for matrix multiplications use an "x" (e.g. math_mul33x3); don't use the "x" to describe the shape of the tensor that the function is applied to (e.g. math_invert33 instead of math_invert3x3)
2012-01-26 19:20:00 +05:30
J_inverse = 1.0_pReal / math_det33(materialpoint_F(1:3,1:3,IP,cp_en))
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
CPFEM_cs(1:6,IP,cp_en) = math_Mandel33to6(J_inverse * Kirchhoff)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! translate from dP/dF to dCS/dE
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
H = 0.0_pReal
exchanged forall (warning causers) to nested do loops deleted (currently unused) symmetrization of H tensor in CPFEM.f90 --> Denny pls advise?
2010-08-20 03:05:38 +05:30
do i=1,3; do j=1,3; do k=1,3; do l=1,3; do m=1,3; do n=1,3
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
H(i,j,k,l) = H(i,j,k,l) + &
materialpoint_F(j,m,IP,cp_en) * &
materialpoint_F(l,n,IP,cp_en) * &
materialpoint_dPdF(i,m,k,n,IP,cp_en) - &
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
math_I3(j,l) * materialpoint_F(i,m,IP,cp_en) * materialpoint_P(k,m,IP,cp_en) + &
0.5_pReal * (math_I3(i,k) * Kirchhoff(j,l) + math_I3(j,l) * Kirchhoff(i,k) + &
math_I3(i,l) * Kirchhoff(j,k) + math_I3(j,k) * Kirchhoff(i,l))
exchanged forall (warning causers) to nested do loops deleted (currently unused) symmetrization of H tensor in CPFEM.f90 --> Denny pls advise?
2010-08-20 03:05:38 +05:30
enddo; enddo; enddo; enddo; enddo; enddo
lattice: (re)introduced _symmetryType function to replace unsafe lookup array numerics: polishing mpie_cpfem_marc: polishing ..powerlaw: aware of symmetryType function crystallite: aware of symmetryType function, smaller leapfrog acceleration IO: new warning 101 CPFEM: range of odd stress is now -1e15...+1e15, H_sym is used for stiffness
2010-11-03 20:28:11 +05:30
do i=1,3; do j=1,3; do k=1,3; do l=1,3
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
H_sym(i,j,k,l) = 0.25_pReal * (H(i,j,k,l) + H(j,i,k,l) + H(i,j,l,k) + H(j,i,l,k))
lattice: (re)introduced _symmetryType function to replace unsafe lookup array numerics: polishing mpie_cpfem_marc: polishing ..powerlaw: aware of symmetryType function crystallite: aware of symmetryType function, smaller leapfrog acceleration IO: new warning 101 CPFEM: range of odd stress is now -1e15...+1e15, H_sym is used for stiffness
2010-11-03 20:28:11 +05:30
enddo; enddo; enddo; enddo
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
CPFEM_dcsde(1:6,1:6,IP,cp_en) = math_Mandel3333to66(J_inverse * H_sym)
now with first draft of nonlocal constitutive law debugging memory leak closed debugging counters corrected center of gravity stored in mesh state updated is now split into a collecting loop and an execution updateState and updateTemperature fill sequentially separate logicals and evaluate afterwards to converged added 3x3 transposition function, norm for 3x1 matrix and 33x3 matrix multiplication in math non-converged crystallite triggers materialpoint cutback (used to respond elastically) non-converged materialpoint raises terminal illness which in turn renders whole FE increment useless by means of odd stress/stiffness and thus waits for FE cutback
2009-08-11 22:01:57 +05:30
endif
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
endif
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
1) fixed terminallyIll bug occurring with Ngrains=1 homogenization 2) brushed up the output to be more easily readable/understandable
2010-09-02 02:34:02 +05:30
! --+>> COLLECTION OF FEM INPUT WITH RETURNING OF RANDOMIZED ODD STRESS AND JACOBIAN <<+--
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
case (3,4,5)
if (mode == 4) then
CPFEM_dcsde_knownGood = CPFEM_dcsde ! --+>> BACKUP JACOBIAN FROM FORMER CONVERGED INC
else if (mode == 5) then
CPFEM_dcsde = CPFEM_dcsde_knownGood ! --+>> RESTORE CONSISTENT JACOBIAN FROM FORMER CONVERGED INC
end if
exchanged forall (warning causers) to nested do loops deleted (currently unused) symmetrization of H tensor in CPFEM.f90 --> Denny pls advise?
2010-08-20 03:05:38 +05:30
call random_number(rnd)
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
if (rnd < 0.5_pReal) rnd = rnd - 1.0_pReal
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
materialpoint_Temperature(IP,cp_en) = Temperature
materialpoint_F0(1:3,1:3,IP,cp_en) = ffn
materialpoint_F(1:3,1:3,IP,cp_en) = ffn1
CPFEM_cs(1:6,IP,cp_en) = rnd * CPFEM_odd_stress
CPFEM_dcsde(1:6,1:6,IP,cp_en) = CPFEM_odd_jacobian * math_identity2nd(6)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
CPFEM_calc_done = .false.
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! --+>> RECYCLING OF FORMER RESULTS (MARC SPECIALTY) <<+--
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
case (6)
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
! do nothing
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
1) fixed terminallyIll bug occurring with Ngrains=1 homogenization 2) brushed up the output to be more easily readable/understandable
2010-09-02 02:34:02 +05:30
! --+>> RESTORE CONSISTENT JACOBIAN FROM FORMER CONVERGED INC
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
added new computation modes 8 and 9 for Abaqus_exp. These correspond to mode 1 and 2 but do collection and calculation in one step. stress and stiffness are always of dimension 6 in CPFEM_general, hence, variable "ngens" useless by now
2010-02-18 15:45:08 +05:30
case (7)
1) fixed terminallyIll bug occurring with Ngrains=1 homogenization 2) brushed up the output to be more easily readable/understandable
2010-09-02 02:34:02 +05:30
CPFEM_dcsde = CPFEM_dcsde_knownGood
added a new module called numerics.f90 which reads in all numerical "parameters" from the file numerics.config (also being added). From now on this file has to be located in the working directory of the FEM-model and has to contain all necessary parameters.
2009-06-15 18:41:21 +05:30
end select
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
!*** fill output variables with computed values
openmp parallelization working again (at least for j2 and nonlocal constitutive model). In order to keep it like that, please follow these simple rules: DON'T use implicit array subscripts: example: real, dimension(3,3) :: A,B A(:,2) = B(:,1) <--- DON'T USE A(1:3,2) = B(1:3,1) <--- BETTER USE In many cases the use of explicit array subscripts is inevitable for parallelization. Additionally, it is an easy means to prevent memory leaks. Enclose all write statements with the following: !$OMP CRITICAL (write2out) <your write statement> !$OMP END CRITICAL (write2out) Whenever you change something in the code and are not sure if it affects parallelization and leads to nonconforming behavior, please ask me and/or Franz to check this.
2011-03-17 16:16:17 +05:30
cauchyStress = CPFEM_cs(1:6,IP,cp_en)
jacobian = CPFEM_dcsdE(1:6,1:6,IP,cp_en)
pstress = materialpoint_P(1:3,1:3,IP,cp_en)
dPdF = materialpoint_dPdF(1:3,1:3,1:3,1:3,IP,cp_en)
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
if (theTime > 0.0_pReal) then
Temperature = materialpoint_Temperature(IP,cp_en) ! homogenized result except for potentially non-isothermal starting condition.
* cpfem will now produce a warning if all components of the stiffness tensor are close to zero
2010-11-04 23:48:01 +05:30
endif
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
changed the majority of debugging output to level "extensive"
2012-07-24 20:59:23 +05:30
if (mode < 3 .and. iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt &
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
.and. ((debug_e == cp_en .and. debug_i == IP) &
changed variable name "debug_what" to "debug_level"
2012-07-05 15:24:50 +05:30
.or. .not. iand(debug_level(debug_CPFEM), debug_levelSelective) /= 0_pInt)) then
new numerics parameter "defgradTolerance" replaces "relevantStrain" in cpfem, since "relevantStrain" is also used in crystallite but in a different context. "defgradTolerance" gets the same standard value as "relevantStrain" so calculations should be consistent with older ones
2010-05-20 20:25:11 +05:30
!$OMP CRITICAL (write2out)
minor changes, substituting implicit type conversions with explicit ones
2012-02-14 17:47:47 +05:30
write(6,'(a,i8,1x,i2,/,12x,6(f10.3,1x)/)') '<< CPFEM >> stress/MPa at el ip ', cp_en, IP, cauchyStress/1.0e6_pReal
keep "odd" stress in rnd-range of -1.0 to -0.5 and 0.5 to 1.0 serial calc now skips IPs when /elementhomogeneous/ for /elementhomogeneous/ IPs > 1 individually copy the result from IP 1 to prevent spuriously outdating themselves.
2012-11-21 22:30:29 +05:30
write(6,'(a,i8,1x,i2,/,6(12x,6(f10.3,1x)/))') '<< CPFEM >> Jacobian/GPa at el ip ', cp_en, IP, transpose(jacobian)/1.0e9_pReal
added doxygen documentation to material.f90 and marked read-only quantities as protected where possible, removed substituted "call flush" by "flush"
2013-01-18 17:00:52 +05:30
flush(6)
new numerics parameter "defgradTolerance" replaces "relevantStrain" in cpfem, since "relevantStrain" is also used in crystallite but in a different context. "defgradTolerance" gets the same standard value as "relevantStrain" so calculations should be consistent with older ones
2010-05-20 20:25:11 +05:30
!$OMP END CRITICAL (write2out)
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
endif
ip coordinates are now updated every cycle; this is needed for the nonlocal internal stress fields * Marc: node displacements are added to initial node coordinates (mesh_node0) to get current node positions (mesh_node), then ip coordinates are deduced * Abaqus: ip coordinates are directly updated, no update of node coordinates! * Spectral: for the moment no update of either ip or node coordinates! passing only dummy values with initial ip coordinates
2011-05-24 21:27:59 +05:30
!*** warn if stiffness close to zero
if (all(abs(jacobian) < 1e-10_pReal)) then
call IO_warning(601,cp_en,IP)
endif
!*** remember extreme values of stress and jacobian
extreme values of stress and jacobian now recorded in CPFEM_general. variable declaration and generation of output moved to debug module.
2011-03-17 18:43:13 +05:30
if (mode < 3) then
cauchyStress33 = math_Mandel6to33(cauchyStress)
if (maxval(cauchyStress33) > debug_stressMax) then
debug_stressMaxLocation = (/cp_en, IP/)
debug_stressMax = maxval(cauchyStress33)
endif
if (minval(cauchyStress33) < debug_stressMin) then
debug_stressMinLocation = (/cp_en, IP/)
debug_stressMin = minval(cauchyStress33)
endif
jacobian3333 = math_Mandel66to3333(jacobian)
if (maxval(jacobian3333) > debug_jacobianMax) then
debug_jacobianMaxLocation = (/cp_en, IP/)
debug_jacobianMax = maxval(jacobian3333)
endif
if (minval(jacobian3333) < debug_jacobianMin) then
debug_jacobianMinLocation = (/cp_en, IP/)
debug_jacobianMin = minval(jacobian3333)
endif
endif
added new, flexible debugging scheme. now all modules have their own debug specification. compiles and runs, I hope nothing is broken did a lot of polishing
2012-03-09 01:55:28 +05:30
end subroutine CPFEM_general
forgot to add those two (rather crucial) files .. ;-)
2009-03-04 19:31:36 +05:30
# new interface for Abaqus # IO has some additional functionality for Abaqus parsing # ping pong scheme in FE interface now similar (and more human understandable) in both versions # mesh has better splitting of different tasks, plus operation on database whenever possible # FEsolver as new global var to indicate FEM solver type # computation mode reshuffling: 6 is now Marc special case of recycling...
2009-10-12 21:31:49 +05:30
END MODULE CPFEM