223031012
/
DAMASK_EICMD
mirror of https://github.com/achalhp/DAMASK_EICMD.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
DAMASK_EICMD/src/CPFEM2.f90

364 lines
12 KiB
Fortran
Raw Normal View History

split CPFEM module into one for spectral solver (also suitable for PETSc FEM) and one for commercial FEM codes as all the ping pong handling, cut back detection etc. is not needed for spectral. Needs certainly a better name, or might be superfluous at all if crystallite, constitutive, and homogenization take care of their data for restart write/read and forwarding
2016-01-17 20:33:54 +05:30
!--------------------------------------------------------------------------------------------------
!> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH
!> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH
!> @brief needs a good name and description
!--------------------------------------------------------------------------------------------------
module CPFEM2
implicit none
private
public :: &
CPFEM_general, &
CPFEM_initAll
contains
!--------------------------------------------------------------------------------------------------
!> @brief call (thread safe) all module initializations
!--------------------------------------------------------------------------------------------------
subroutine CPFEM_initAll(el,ip)
need to write out initial results for new CPFEM2
2016-01-20 21:49:05 +05:30
use prec, only: &
pInt
split CPFEM module into one for spectral solver (also suitable for PETSc FEM) and one for commercial FEM codes as all the ping pong handling, cut back detection etc. is not needed for spectral. Needs certainly a better name, or might be superfluous at all if crystallite, constitutive, and homogenization take care of their data for restart write/read and forwarding
2016-01-17 20:33:54 +05:30
use prec, only: &
prec_init
use numerics, only: &
numerics_init
use debug, only: &
debug_init
use FEsolving, only: &
FE_init
use math, only: &
math_init
use mesh, only: &
mesh_init
use lattice, only: &
lattice_init
use material, only: &
material_init
use constitutive, only: &
constitutive_init
use crystallite, only: &
crystallite_init
use homogenization, only: &
need to write out initial results for new CPFEM2
2016-01-20 21:49:05 +05:30
homogenization_init, &
removed compiler warnings about conversion and floating point comparison
2016-05-27 15:16:34 +05:30
materialpoint_postResults
split CPFEM module into one for spectral solver (also suitable for PETSc FEM) and one for commercial FEM codes as all the ping pong handling, cut back detection etc. is not needed for spectral. Needs certainly a better name, or might be superfluous at all if crystallite, constitutive, and homogenization take care of their data for restart write/read and forwarding
2016-01-17 20:33:54 +05:30
use IO, only: &
IO_init
use DAMASK_interface
#ifdef FEM
use FEZoo, only: &
FEZoo_init
#endif
implicit none
integer(pInt), intent(in) :: el, & !< FE el number
ip !< FE integration point number
need to write out initial results for new CPFEM2
2016-01-20 21:49:05 +05:30
call DAMASK_interface_init ! Spectral and FEM interface to commandline
call prec_init
call IO_init
split CPFEM module into one for spectral solver (also suitable for PETSc FEM) and one for commercial FEM codes as all the ping pong handling, cut back detection etc. is not needed for spectral. Needs certainly a better name, or might be superfluous at all if crystallite, constitutive, and homogenization take care of their data for restart write/read and forwarding
2016-01-17 20:33:54 +05:30
#ifdef FEM
need to write out initial results for new CPFEM2
2016-01-20 21:49:05 +05:30
call FEZoo_init
split CPFEM module into one for spectral solver (also suitable for PETSc FEM) and one for commercial FEM codes as all the ping pong handling, cut back detection etc. is not needed for spectral. Needs certainly a better name, or might be superfluous at all if crystallite, constitutive, and homogenization take care of their data for restart write/read and forwarding
2016-01-17 20:33:54 +05:30
#endif
need to write out initial results for new CPFEM2
2016-01-20 21:49:05 +05:30
call numerics_init
call debug_init
call math_init
call FE_init
call mesh_init(ip, el) ! pass on coordinates to alter calcMode of first ip
call lattice_init
call material_init
call constitutive_init
call crystallite_init
call homogenization_init
call materialpoint_postResults
removed compiler warnings about conversion and floating point comparison
2016-05-27 15:16:34 +05:30
call CPFEM_init
split CPFEM module into one for spectral solver (also suitable for PETSc FEM) and one for commercial FEM codes as all the ping pong handling, cut back detection etc. is not needed for spectral. Needs certainly a better name, or might be superfluous at all if crystallite, constitutive, and homogenization take care of their data for restart write/read and forwarding
2016-01-17 20:33:54 +05:30
end subroutine CPFEM_initAll
!--------------------------------------------------------------------------------------------------
!> @brief allocate the arrays defined in module CPFEM and initialize them
!--------------------------------------------------------------------------------------------------
subroutine CPFEM_init
use, intrinsic :: iso_fortran_env ! to get compiler_version and compiler_options (at least for gfortran 4.6 at the moment)
use prec, only: &
pInt
use IO, only: &
IO_read_realFile,&
IO_read_intFile, &
IO_timeStamp, &
IO_error
use numerics, only: &
worldrank
use debug, only: &
debug_level, &
debug_CPFEM, &
debug_levelBasic, &
debug_levelExtensive
use FEsolving, only: &
restartRead, &
modelName
use material, only: &
material_phase, &
homogState, &
phase_plasticity, &
plasticState, &
material_Nhomogenization
use crystallite, only: &
crystallite_F0, &
crystallite_Fp0, &
crystallite_Lp0, &
crystallite_Fi0, &
crystallite_Li0, &
crystallite_dPdF0, &
crystallite_Tstar0_v
implicit none
integer(pInt) :: k,l,m,ph,homog
character(len=1024) :: rankStr
mainProcess: if (worldrank == 0) then
write(6,'(/,a)') ' <<<+- CPFEM init -+>>>'
write(6,'(a15,a)') ' Current time: ',IO_timeStamp()
#include "compilation_info.f90"
endif mainProcess
! *** restore the last converged values of each essential variable from the binary file
if (restartRead) then
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
write(6,'(a)') '<< CPFEM >> restored state variables of last converged step from binary files'
flush(6)
endif
write(rankStr,'(a1,i0)')'_',worldrank
call IO_read_intFile(777,'recordedPhase'//trim(rankStr),modelName,size(material_phase))
read (777,rec=1) material_phase
close (777)
call IO_read_realFile(777,'convergedF'//trim(rankStr),modelName,size(crystallite_F0))
read (777,rec=1) crystallite_F0
close (777)
call IO_read_realFile(777,'convergedFp'//trim(rankStr),modelName,size(crystallite_Fp0))
read (777,rec=1) crystallite_Fp0
close (777)
call IO_read_realFile(777,'convergedFi'//trim(rankStr),modelName,size(crystallite_Fi0))
read (777,rec=1) crystallite_Fi0
close (777)
call IO_read_realFile(777,'convergedLp'//trim(rankStr),modelName,size(crystallite_Lp0))
read (777,rec=1) crystallite_Lp0
close (777)
call IO_read_realFile(777,'convergedLi'//trim(rankStr),modelName,size(crystallite_Li0))
read (777,rec=1) crystallite_Li0
close (777)
call IO_read_realFile(777,'convergeddPdF'//trim(rankStr),modelName,size(crystallite_dPdF0))
read (777,rec=1) crystallite_dPdF0
close (777)
call IO_read_realFile(777,'convergedTstar'//trim(rankStr),modelName,size(crystallite_Tstar0_v))
read (777,rec=1) crystallite_Tstar0_v
close (777)
call IO_read_realFile(777,'convergedStateConst'//trim(rankStr),modelName)
m = 0_pInt
readPlasticityInstances: do ph = 1_pInt, size(phase_plasticity)
do k = 1_pInt, plasticState(ph)%sizeState
do l = 1, size(plasticState(ph)%state0(1,:))
m = m+1_pInt
read(777,rec=m) plasticState(ph)%state0(k,l)
enddo; enddo
enddo readPlasticityInstances
close (777)
call IO_read_realFile(777,'convergedStateHomog'//trim(rankStr),modelName)
m = 0_pInt
readHomogInstances: do homog = 1_pInt, material_Nhomogenization
do k = 1_pInt, homogState(homog)%sizeState
do l = 1, size(homogState(homog)%state0(1,:))
m = m+1_pInt
read(777,rec=m) homogState(homog)%state0(k,l)
enddo; enddo
enddo readHomogInstances
close (777)
restartRead = .false.
endif
flush(6)
end subroutine CPFEM_init
!--------------------------------------------------------------------------------------------------
!> @brief perform initialization at first call, update variables and call the actual material model
!--------------------------------------------------------------------------------------------------
subroutine CPFEM_general(age, dt)
need to write out initial results for new CPFEM2
2016-01-20 21:49:05 +05:30
use prec, only: &
pReal, &
pInt
split CPFEM module into one for spectral solver (also suitable for PETSc FEM) and one for commercial FEM codes as all the ping pong handling, cut back detection etc. is not needed for spectral. Needs certainly a better name, or might be superfluous at all if crystallite, constitutive, and homogenization take care of their data for restart write/read and forwarding
2016-01-17 20:33:54 +05:30
use numerics, only: &
worldrank
use debug, only: &
debug_level, &
debug_CPFEM, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective
use FEsolving, only: &
terminallyIll, &
restartWrite
use math, only: &
math_identity2nd, &
math_mul33x33, &
math_det33, &
math_transpose33, &
math_I3, &
math_Mandel3333to66, &
math_Mandel66to3333, &
math_Mandel33to6, &
math_Mandel6to33
use material, only: &
plasticState, &
sourceState, &
homogState, &
thermalState, &
damageState, &
vacancyfluxState, &
hydrogenfluxState, &
material_phase, &
phase_plasticity, &
phase_Nsources, &
material_Nhomogenization
use crystallite, only: &
crystallite_partionedF,&
crystallite_F0, &
crystallite_Fp0, &
crystallite_Fp, &
crystallite_Fi0, &
crystallite_Fi, &
crystallite_Lp0, &
crystallite_Lp, &
crystallite_Li0, &
crystallite_Li, &
crystallite_dPdF0, &
crystallite_dPdF, &
crystallite_Tstar0_v, &
crystallite_Tstar_v
use homogenization, only: &
materialpoint_stressAndItsTangent, &
materialpoint_postResults
use IO, only: &
IO_write_jobRealFile, &
IO_warning
use DAMASK_interface
implicit none
real(pReal), intent(in) :: dt !< time increment
logical, intent(in) :: age !< age results
integer(pInt) :: i, k, l, m, ph, homog, mySource
character(len=1024) :: rankStr
!*** age results and write restart data if requested
if (age) then
crystallite_F0 = crystallite_partionedF ! crystallite deformation (_subF is perturbed...)
crystallite_Fp0 = crystallite_Fp ! crystallite plastic deformation
crystallite_Lp0 = crystallite_Lp ! crystallite plastic velocity
crystallite_Fi0 = crystallite_Fi ! crystallite intermediate deformation
crystallite_Li0 = crystallite_Li ! crystallite intermediate velocity
crystallite_dPdF0 = crystallite_dPdF ! crystallite stiffness
crystallite_Tstar0_v = crystallite_Tstar_v ! crystallite 2nd Piola Kirchhoff stress
forall ( i = 1:size(plasticState )) plasticState(i)%state0 = plasticState(i)%state ! copy state in this lenghty way because: A component cannot be an array if the encompassing structure is an array
do i = 1, size(sourceState)
do mySource = 1,phase_Nsources(i)
sourceState(i)%p(mySource)%state0 = sourceState(i)%p(mySource)%state ! copy state in this lenghty way because: A component cannot be an array if the encompassing structure is an array
enddo; enddo
if (iand(debug_level(debug_CPFEM), debug_levelBasic) /= 0_pInt) &
write(6,'(a)') '<< CPFEM >> aging states'
do homog = 1_pInt, material_Nhomogenization
homogState (homog)%state0 = homogState (homog)%state
thermalState (homog)%state0 = thermalState (homog)%state
damageState (homog)%state0 = damageState (homog)%state
vacancyfluxState (homog)%state0 = vacancyfluxState (homog)%state
hydrogenfluxState(homog)%state0 = hydrogenfluxState(homog)%state
enddo
if (restartWrite) then
if (iand(debug_level(debug_CPFEM), debug_levelBasic) /= 0_pInt) &
write(6,'(a)') '<< CPFEM >> writing state variables of last converged step to binary files'
write(rankStr,'(a1,i0)')'_',worldrank
call IO_write_jobRealFile(777,'recordedPhase'//trim(rankStr),size(material_phase))
write (777,rec=1) material_phase
close (777)
call IO_write_jobRealFile(777,'convergedF'//trim(rankStr),size(crystallite_F0))
write (777,rec=1) crystallite_F0
close (777)
call IO_write_jobRealFile(777,'convergedFp'//trim(rankStr),size(crystallite_Fp0))
write (777,rec=1) crystallite_Fp0
close (777)
call IO_write_jobRealFile(777,'convergedFi'//trim(rankStr),size(crystallite_Fi0))
write (777,rec=1) crystallite_Fi0
close (777)
call IO_write_jobRealFile(777,'convergedLp'//trim(rankStr),size(crystallite_Lp0))
write (777,rec=1) crystallite_Lp0
close (777)
call IO_write_jobRealFile(777,'convergedLi'//trim(rankStr),size(crystallite_Li0))
write (777,rec=1) crystallite_Li0
close (777)
call IO_write_jobRealFile(777,'convergeddPdF'//trim(rankStr),size(crystallite_dPdF0))
write (777,rec=1) crystallite_dPdF0
close (777)
call IO_write_jobRealFile(777,'convergedTstar'//trim(rankStr),size(crystallite_Tstar0_v))
write (777,rec=1) crystallite_Tstar0_v
close (777)
call IO_write_jobRealFile(777,'convergedStateConst'//trim(rankStr))
m = 0_pInt
writePlasticityInstances: do ph = 1_pInt, size(phase_plasticity)
do k = 1_pInt, plasticState(ph)%sizeState
do l = 1, size(plasticState(ph)%state0(1,:))
m = m+1_pInt
write(777,rec=m) plasticState(ph)%state0(k,l)
enddo; enddo
enddo writePlasticityInstances
close (777)
call IO_write_jobRealFile(777,'convergedStateHomog'//trim(rankStr))
m = 0_pInt
writeHomogInstances: do homog = 1_pInt, material_Nhomogenization
do k = 1_pInt, homogState(homog)%sizeState
do l = 1, size(homogState(homog)%state0(1,:))
m = m+1_pInt
write(777,rec=m) homogState(homog)%state0(k,l)
enddo; enddo
enddo writeHomogInstances
close (777)
endif
endif
if (.not. terminallyIll) &
call materialpoint_stressAndItsTangent(.True., dt)
end subroutine CPFEM_general
end module CPFEM2