DAMASK_EICMD/code/CPFEM.f90

638 lines
30 KiB
Fortran
Raw Normal View History

2013-03-22 23:05:05 +05:30
! Copyright 2011-13 Max-Planck-Institut für Eisenforschung GmbH
!
! This file is part of DAMASK,
! the Düsseldorf Advanced Material Simulation Kit.
!
! DAMASK is free software: you can redistribute it and/or modify
! it under the terms of the GNU General Public License as published by
! the Free Software Foundation, either version 3 of the License, or
! (at your option) any later version.
!
! DAMASK is distributed in the hope that it will be useful,
! but WITHOUT ANY WARRANTY; without even the implied warranty of
! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
! GNU General Public License for more details.
!
! You should have received a copy of the GNU General Public License
! along with DAMASK. If not, see <http://www.gnu.org/licenses/>.
!
2013-03-06 20:11:15 +05:30
!--------------------------------------------------------------------------------------------------
! $Id$
!--------------------------------------------------------------------------------------------------
!> @author Franz Roters, Max-Planck-Institut für Eisenforschung GmbH
!> @author Philip Eisenlohr, Max-Planck-Institut für Eisenforschung GmbH
!> @brief CPFEM engine
!--------------------------------------------------------------------------------------------------
module CPFEM
2013-03-06 20:11:15 +05:30
use prec, only: &
pReal, &
pInt
implicit none
2013-03-06 20:11:15 +05:30
real(pReal), parameter :: CPFEM_odd_stress = 1e15_pReal, & !< return value for stress in case of ping pong dummy cycle
CPFEM_odd_jacobian = 1e50_pReal !< return value for jacobian in case of ping pong dummy cycle
2013-03-06 20:11:15 +05:30
real(pReal), dimension (:,:,:), allocatable :: CPFEM_cs !< Cauchy stress
real(pReal), dimension (:,:,:,:), allocatable :: CPFEM_dcsdE !< Cauchy stress tangent
real(pReal), dimension (:,:,:,:), allocatable :: CPFEM_dcsdE_knownGood !< known good tangent
2013-03-06 20:11:15 +05:30
logical :: CPFEM_init_done = .false., & !< remember whether init has been done already
CPFEM_init_inProgress = .false., & !< remember whether first IP is currently performing init
CPFEM_calc_done = .false. !< remember whether first IP has already calced the results
logical, private :: parallelExecution = .false.
integer(pInt), parameter, public :: &
CPFEM_CALCRESULTS = 2_pInt**0_pInt, &
CPFEM_AGERESULTS = 2_pInt**1_pInt, &
CPFEM_BACKUPJACOBIAN = 2_pInt**2_pInt, &
CPFEM_RESTOREJACOBIAN = 2_pInt**3_pInt, &
CPFEM_COLLECT = 2_pInt**4_pInt, &
CPFEM_EXPLICIT = 2_pInt**5_pInt
public ::CPFEM_general, &
CPFEM_initAll
contains
2013-03-06 20:11:15 +05:30
!--------------------------------------------------------------------------------------------------
!> @brief call (thread safe) all module initializations
!--------------------------------------------------------------------------------------------------
subroutine CPFEM_initAll(Temperature,element,IP)
2013-03-06 20:11:15 +05:30
use prec, only: &
prec_init
use numerics, only: &
numerics_init
use debug, only: &
debug_init
use FEsolving, only: &
FE_init
use math, only: &
math_init
use mesh, only: &
mesh_init
use lattice, only: &
lattice_init
use material, only: &
material_init
use constitutive, only: &
constitutive_init
use crystallite, only: &
crystallite_init
use homogenization, only: &
homogenization_init
use IO, only: &
IO_init
use DAMASK_interface
implicit none
integer(pInt), intent(in) :: element, & ! FE element number
IP ! FE integration point number
real(pReal), intent(in) :: Temperature ! temperature
real(pReal) rnd
integer(pInt) i,n
! initialization step (three dimensional stress state check missing?)
if (.not. CPFEM_init_done) then
call random_number(rnd)
do i=1,int(256.0*rnd)
n = n+1_pInt ! wasting random amount of time...
enddo ! ...to break potential race in multithreading
n = n+1_pInt
if (.not. CPFEM_init_inProgress) then ! yes my thread won!
CPFEM_init_inProgress = .true.
#ifdef Spectral
call DAMASK_interface_init() ! Spectral solver is interfacing to commandline
#endif
call prec_init
call IO_init
call numerics_init
call debug_init
call math_init
call FE_init
call mesh_init(IP, element) ! pass on coordinates to alter calcMode of first ip
call lattice_init
call material_init
call constitutive_init
call crystallite_init(Temperature) ! (have to) use temperature of first IP for whole model
call homogenization_init(Temperature)
call CPFEM_init
#ifndef Spectral
call DAMASK_interface_init() ! Spectral solver init is already done
#endif
CPFEM_init_done = .true.
CPFEM_init_inProgress = .false.
else ! loser, loser...
do while (CPFEM_init_inProgress)
enddo
endif
endif
end subroutine CPFEM_initAll
2013-03-06 20:11:15 +05:30
!--------------------------------------------------------------------------------------------------
!> @brief allocate the arrays defined in module CPFEM and initialize them
!--------------------------------------------------------------------------------------------------
subroutine CPFEM_init
use, intrinsic :: iso_fortran_env ! to get compiler_version and compiler_options (at least for gfortran 4.6 at the moment)
use prec, only: &
pInt
use IO, only: &
IO_read_jobBinaryFile,&
IO_read_jobBinaryIntFile, &
IO_timeStamp, &
IO_error
use numerics, only: &
DAMASK_NumThreadsInt, &
usePingPong
use debug, only: &
debug_level, &
debug_CPFEM, &
debug_levelBasic, &
debug_levelExtensive
use FEsolving, only: &
symmetricSolver, &
restartRead, &
modelName
use mesh, only: &
mesh_NcpElems, &
mesh_maxNips
use material, only: &
homogenization_maxNgrains, &
material_phase
use constitutive, only: &
constitutive_state0
use crystallite, only: &
crystallite_F0, &
crystallite_Fp0, &
crystallite_Lp0, &
crystallite_dPdF0, &
crystallite_Tstar0_v, &
crystallite_localPlasticity
use homogenization, only: &
homogenization_sizeState, &
homogenization_state0
implicit none
integer(pInt) i,j,k,l,m
write(6,'(/,a)') ' <<<+- CPFEM init -+>>>'
write(6,'(a)') ' $Id$'
write(6,'(a15,a)') ' Current time: ',IO_timeStamp()
#include "compilation_info.f90"
! initialize stress and jacobian to zero
allocate(CPFEM_cs(6,mesh_maxNips,mesh_NcpElems)) ; CPFEM_cs = 0.0_pReal
allocate(CPFEM_dcsdE(6,6,mesh_maxNips,mesh_NcpElems)) ; CPFEM_dcsdE = 0.0_pReal
allocate(CPFEM_dcsdE_knownGood(6,6,mesh_maxNips,mesh_NcpElems)) ; CPFEM_dcsdE_knownGood = 0.0_pReal
! *** restore the last converged values of each essential variable from the binary file
if (restartRead) then
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
!$OMP CRITICAL (write2out)
write(6,'(a)') '<< CPFEM >> restored state variables of last converged step from binary files'
!$OMP END CRITICAL (write2out)
endif
call IO_read_jobBinaryIntFile(777,'recordedPhase',modelName,size(material_phase))
read (777,rec=1) material_phase
close (777)
call IO_read_jobBinaryFile(777,'convergedF',modelName,size(crystallite_F0))
read (777,rec=1) crystallite_F0
close (777)
call IO_read_jobBinaryFile(777,'convergedFp',modelName,size(crystallite_Fp0))
read (777,rec=1) crystallite_Fp0
close (777)
call IO_read_jobBinaryFile(777,'convergedLp',modelName,size(crystallite_Lp0))
read (777,rec=1) crystallite_Lp0
close (777)
call IO_read_jobBinaryFile(777,'convergeddPdF',modelName,size(crystallite_dPdF0))
read (777,rec=1) crystallite_dPdF0
close (777)
call IO_read_jobBinaryFile(777,'convergedTstar',modelName,size(crystallite_Tstar0_v))
read (777,rec=1) crystallite_Tstar0_v
close (777)
call IO_read_jobBinaryFile(777,'convergedStateConst',modelName)
m = 0_pInt
do i = 1,homogenization_maxNgrains; do j = 1,mesh_maxNips; do k = 1,mesh_NcpElems
do l = 1,size(constitutive_state0(i,j,k)%p)
m = m+1_pInt
read(777,rec=m) constitutive_state0(i,j,k)%p(l)
enddo
enddo; enddo; enddo
close (777)
call IO_read_jobBinaryFile(777,'convergedStateHomog',modelName)
m = 0_pInt
do k = 1,mesh_NcpElems; do j = 1,mesh_maxNips
do l = 1,homogenization_sizeState(j,k)
m = m+1_pInt
read(777,rec=m) homogenization_state0(j,k)%p(l)
enddo
enddo; enddo
close (777)
call IO_read_jobBinaryFile(777,'convergeddcsdE',modelName,size(CPFEM_dcsdE))
read (777,rec=1) CPFEM_dcsdE
close (777)
restartRead = .false.
endif
if (iand(debug_level(debug_CPFEM), debug_levelBasic) /= 0) then
write(6,'(a32,1x,6(i8,1x))') 'CPFEM_cs: ', shape(CPFEM_cs)
write(6,'(a32,1x,6(i8,1x))') 'CPFEM_dcsdE: ', shape(CPFEM_dcsdE)
write(6,'(a32,1x,6(i8,1x))') 'CPFEM_dcsdE_knownGood: ', shape(CPFEM_dcsdE_knownGood)
write(6,*)
write(6,*) 'parallelExecution: ', parallelExecution
write(6,*) 'symmetricSolver: ', symmetricSolver
endif
flush(6)
end subroutine CPFEM_init
2013-03-06 20:11:15 +05:30
!--------------------------------------------------------------------------------------------------
!> @brief perform initialization at first call, update variables and call the actual material model
!--------------------------------------------------------------------------------------------------
subroutine CPFEM_general(mode, ffn, ffn1, Temperature, dt, element, IP, cauchyStress, jacobian)
! note: cauchyStress = Cauchy stress cs(6) and jacobian = Consistent tangent dcs/dE
use numerics, only: defgradTolerance, &
iJacoStiffness, &
usePingPong
use debug, only: debug_level, &
debug_CPFEM, &
debug_levelBasic, &
debug_levelExtensive, &
debug_levelSelective, &
debug_e, &
debug_i, &
debug_stressMaxLocation, &
debug_stressMinLocation, &
debug_jacobianMaxLocation, &
debug_jacobianMinLocation, &
debug_stressMax, &
debug_stressMin, &
debug_jacobianMax, &
debug_jacobianMin
use FEsolving, only: outdatedFFN1, &
terminallyIll, &
cycleCounter, &
theInc, &
theTime, &
theDelta, &
FEsolving_execElem, &
FEsolving_execIP, &
restartWrite
use math, only: math_identity2nd, &
math_mul33x33, &
math_det33, &
math_transpose33, &
math_I3, &
math_Mandel3333to66, &
math_Mandel66to3333, &
math_Mandel33to6, &
math_Mandel6to33
use mesh, only: mesh_FEasCP, &
mesh_NcpElems, &
mesh_maxNips, &
mesh_element
use material, only: homogenization_maxNgrains, &
microstructure_elemhomo, &
material_phase
use constitutive, only: constitutive_state0,constitutive_state
use crystallite, only: crystallite_partionedF,&
crystallite_F0, &
crystallite_Fp0, &
crystallite_Fp, &
crystallite_Lp0, &
crystallite_Lp, &
crystallite_dPdF0, &
crystallite_dPdF, &
crystallite_Tstar0_v, &
crystallite_Tstar_v
use homogenization, only: homogenization_sizeState, &
homogenization_state, &
homogenization_state0, &
materialpoint_F, &
materialpoint_F0, &
materialpoint_P, &
materialpoint_dPdF, &
materialpoint_results, &
materialpoint_sizeResults, &
materialpoint_Temperature, &
materialpoint_stressAndItsTangent, &
materialpoint_postResults
use IO, only: IO_write_jobBinaryFile, &
IO_warning
use DAMASK_interface
implicit none
integer(pInt), intent(in) :: element, & !< FE element number
IP !< FE integration point number
real(pReal), intent(inout) :: Temperature !< temperature
real(pReal), intent(in) :: dt !< time increment
real(pReal), dimension (3,3), intent(in) :: ffn, & !< deformation gradient for t=t0
ffn1 !< deformation gradient for t=t1
integer(pInt), intent(in) :: mode !< computation mode 1: regular computation plus aging of results
real(pReal), dimension(6), intent(out), optional :: cauchyStress !< stress vector in Mandel notation
real(pReal), dimension(6,6), intent(out), optional :: jacobian !< jacobian in Mandel notation
real(pReal) J_inverse, & ! inverse of Jacobian
rnd
real(pReal), dimension (3,3) :: Kirchhoff, & ! Piola-Kirchhoff stress in Matrix notation
cauchyStress33 ! stress vector in Matrix notation
real(pReal), dimension (3,3,3,3) :: H_sym, &
H, &
jacobian3333 ! jacobian in Matrix notation
integer(pInt) cp_en, & ! crystal plasticity element number
i, j, k, l, m, n
logical updateJaco ! flag indicating if JAcobian has to be updated
cp_en = mesh_FEasCP('elem',element)
if (iand(debug_level(debug_CPFEM), debug_levelBasic) /= 0_pInt .and. cp_en == 1 .and. IP == 1) then
!$OMP CRITICAL (write2out)
write(6,'(/,a)') '#############################################'
write(6,'(a1,a22,1x,f15.7,a6)') '#','theTime', theTime, '#'
write(6,'(a1,a22,1x,f15.7,a6)') '#','theDelta', theDelta, '#'
write(6,'(a1,a22,1x,i8,a13)') '#','theInc', theInc, '#'
write(6,'(a1,a22,1x,i8,a13)') '#','cycleCounter', cycleCounter, '#'
write(6,'(a1,a22,1x,i8,a13)') '#','computationMode',mode, '#'
write(6,'(a,/)') '#############################################'
flush (6)
!$OMP END CRITICAL (write2out)
endif
parallelExecution = usePingPong .and. .not. (iand(mode, CPFEM_EXPLICIT) /= 0_pInt)
if (iand(mode, CPFEM_AGERESULTS) /= 0_pInt) then
crystallite_F0 = crystallite_partionedF ! crystallite deformation (_subF is perturbed...)
crystallite_Fp0 = crystallite_Fp ! crystallite plastic deformation
crystallite_Lp0 = crystallite_Lp ! crystallite plastic velocity
crystallite_dPdF0 = crystallite_dPdF ! crystallite stiffness
crystallite_Tstar0_v = crystallite_Tstar_v ! crystallite 2nd Piola Kirchhoff stress
forall ( i = 1:homogenization_maxNgrains, &
j = 1:mesh_maxNips, &
k = 1:mesh_NcpElems ) &
constitutive_state0(i,j,k)%p = constitutive_state(i,j,k)%p ! microstructure of crystallites
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
!$OMP CRITICAL (write2out)
write(6,'(a)') '<< CPFEM >> aging states'
if (debug_e <= mesh_NcpElems .and. debug_i <= mesh_maxNips) then
write(6,'(a,1x,i8,1x,i2,1x,i4,/,(12x,6(e20.8,1x)))') '<< CPFEM >> aged state of el ip grain',&
debug_e, debug_i, 1, constitutive_state(1,debug_i,debug_e)%p
write(6,*)
endif
!$OMP END CRITICAL (write2out)
endif
!$OMP PARALLEL DO
do k = 1,mesh_NcpElems
do j = 1,mesh_maxNips
if (homogenization_sizeState(j,k) > 0_pInt) &
homogenization_state0(j,k)%p = homogenization_state(j,k)%p ! internal state of homogenization scheme
enddo
enddo
!$OMP END PARALLEL DO
! * dump the last converged values of each essential variable to a binary file
if (restartWrite) then
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
!$OMP CRITICAL (write2out)
write(6,'(a)') '<< CPFEM >> writing state variables of last converged step to binary files'
!$OMP END CRITICAL (write2out)
endif
call IO_write_jobBinaryFile(777,'recordedPhase',size(material_phase))
write (777,rec=1) material_phase
close (777)
call IO_write_jobBinaryFile(777,'convergedF',size(crystallite_F0))
write (777,rec=1) crystallite_F0
close (777)
call IO_write_jobBinaryFile(777,'convergedFp',size(crystallite_Fp0))
write (777,rec=1) crystallite_Fp0
close (777)
call IO_write_jobBinaryFile(777,'convergedLp',size(crystallite_Lp0))
write (777,rec=1) crystallite_Lp0
close (777)
call IO_write_jobBinaryFile(777,'convergeddPdF',size(crystallite_dPdF0))
write (777,rec=1) crystallite_dPdF0
close (777)
call IO_write_jobBinaryFile(777,'convergedTstar',size(crystallite_Tstar0_v))
write (777,rec=1) crystallite_Tstar0_v
close (777)
call IO_write_jobBinaryFile(777,'convergedStateConst')
m = 0_pInt
do i = 1,homogenization_maxNgrains; do j = 1,mesh_maxNips; do k = 1,mesh_NcpElems
do l = 1,size(constitutive_state0(i,j,k)%p)
m = m+1_pInt
write(777,rec=m) constitutive_state0(i,j,k)%p(l)
enddo
enddo; enddo; enddo
close (777)
call IO_write_jobBinaryFile(777,'convergedStateHomog')
m = 0_pInt
do k = 1,mesh_NcpElems; do j = 1,mesh_maxNips
do l = 1,homogenization_sizeState(j,k)
m = m+1_pInt
write(777,rec=m) homogenization_state0(j,k)%p(l)
enddo
enddo; enddo
close (777)
call IO_write_jobBinaryFile(777,'convergeddcsdE',size(CPFEM_dcsdE))
write (777,rec=1) CPFEM_dcsdE
close (777)
endif
endif
if (.not. parallelExecution) then ! no collect
materialpoint_Temperature(IP,cp_en) = Temperature
materialpoint_F0(1:3,1:3,IP,cp_en) = ffn
materialpoint_F(1:3,1:3,IP,cp_en) = ffn1
endif
if (iand(mode, CPFEM_CALCRESULTS) /= 0_pInt) then
!*** deformation gradient outdated or any actual deformation gradient differs more than relevantStrain from the stored one
if (terminallyIll .or. outdatedFFN1 .or. any(abs(ffn1 - materialpoint_F(1:3,1:3,IP,cp_en)) > defgradTolerance)) then
! if (.not. terminallyIll .and. .not. outdatedFFN1) then
if (any(abs(ffn1 - materialpoint_F(1:3,1:3,IP,cp_en)) > defgradTolerance)) then
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
!$OMP CRITICAL (write2out)
write(6,'(a,1x,i8,1x,i2)') '<< CPFEM >> OUTDATED at el ip',cp_en,IP
write(6,'(a,/,3(12x,3(f10.6,1x),/))') '<< CPFEM >> FFN1 old:',math_transpose33(materialpoint_F(1:3,1:3,IP,cp_en))
write(6,'(a,/,3(12x,3(f10.6,1x),/))') '<< CPFEM >> FFN1 now:',math_transpose33(ffn1)
!$OMP END CRITICAL (write2out)
endif
outdatedFFN1 = .true.
endif
call random_number(rnd)
if (rnd < 0.5_pReal) rnd = rnd - 1.0_pReal
CPFEM_cs(1:6,IP,cp_en) = rnd*CPFEM_odd_stress
CPFEM_dcsde(1:6,1:6,IP,cp_en) = CPFEM_odd_jacobian*math_identity2nd(6)
!*** deformation gradient is not outdated
else
updateJaco = mod(cycleCounter,iJacoStiffness) == 0
!* no parallel computation, so we use just one single element and IP for computation
if (.not. parallelExecution) then
FEsolving_execElem(1) = cp_en
FEsolving_execElem(2) = cp_en
if (.not. microstructure_elemhomo(mesh_element(4,cp_en)) .or. & ! calculate unless homogeneous
(microstructure_elemhomo(mesh_element(4,cp_en)) .and. IP == 1_pInt)) then ! and then only first IP
FEsolving_execIP(1,cp_en) = IP
FEsolving_execIP(2,cp_en) = IP
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
!$OMP CRITICAL (write2out)
write(6,'(a,i8,1x,i2)') '<< CPFEM >> calculation for el ip ',cp_en,IP
!$OMP END CRITICAL (write2out)
endif
call materialpoint_stressAndItsTangent(updateJaco, dt) ! calculate stress and its tangent
call materialpoint_postResults(dt) ! post results
endif
!* parallel computation and calulation not yet done
elseif (.not. CPFEM_calc_done) then
if (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) then
!$OMP CRITICAL (write2out)
write(6,'(a,i8,a,i8)') '<< CPFEM >> calculation for elements ',FEsolving_execElem(1),' to ',FEsolving_execElem(2)
!$OMP END CRITICAL (write2out)
endif
call materialpoint_stressAndItsTangent(updateJaco, dt) ! calculate stress and its tangent (parallel execution inside)
call materialpoint_postResults(dt) ! post results
CPFEM_calc_done = .true.
endif
!*** map stress and stiffness (or return odd values if terminally ill)
if ( terminallyIll ) then
call random_number(rnd)
if (rnd < 0.5_pReal) rnd = rnd - 1.0_pReal
CPFEM_cs(1:6,IP,cp_en) = rnd * CPFEM_odd_stress
CPFEM_dcsde(1:6,1:6,IP,cp_en) = CPFEM_odd_jacobian * math_identity2nd(6)
else
if (microstructure_elemhomo(mesh_element(4,cp_en)) .and. IP > 1_pInt) then ! me homogenous? --> copy from first IP
materialpoint_P(1:3,1:3,IP,cp_en) = materialpoint_P(1:3,1:3,1,cp_en)
materialpoint_F(1:3,1:3,IP,cp_en) = materialpoint_F(1:3,1:3,1,cp_en)
materialpoint_dPdF(1:3,1:3,1:3,1:3,IP,cp_en) = materialpoint_dPdF(1:3,1:3,1:3,1:3,1,cp_en)
materialpoint_results(1:materialpoint_sizeResults,IP,cp_en) = materialpoint_results(1:materialpoint_sizeResults,1,cp_en)
endif
! translate from P to CS
Kirchhoff = math_mul33x33(materialpoint_P(1:3,1:3,IP,cp_en), math_transpose33(materialpoint_F(1:3,1:3,IP,cp_en)))
J_inverse = 1.0_pReal / math_det33(materialpoint_F(1:3,1:3,IP,cp_en))
CPFEM_cs(1:6,IP,cp_en) = math_Mandel33to6(J_inverse * Kirchhoff)
! translate from dP/dF to dCS/dE
H = 0.0_pReal
do i=1,3; do j=1,3; do k=1,3; do l=1,3; do m=1,3; do n=1,3
H(i,j,k,l) = H(i,j,k,l) + &
materialpoint_F(j,m,IP,cp_en) * &
materialpoint_F(l,n,IP,cp_en) * &
materialpoint_dPdF(i,m,k,n,IP,cp_en) - &
math_I3(j,l) * materialpoint_F(i,m,IP,cp_en) * materialpoint_P(k,m,IP,cp_en) + &
0.5_pReal * (math_I3(i,k) * Kirchhoff(j,l) + math_I3(j,l) * Kirchhoff(i,k) + &
math_I3(i,l) * Kirchhoff(j,k) + math_I3(j,k) * Kirchhoff(i,l))
enddo; enddo; enddo; enddo; enddo; enddo
do i=1,3; do j=1,3; do k=1,3; do l=1,3 !< @ToDo use forall
H_sym(i,j,k,l) = 0.25_pReal * (H(i,j,k,l) + H(j,i,k,l) + H(i,j,l,k) + H(j,i,l,k))
enddo; enddo; enddo; enddo
CPFEM_dcsde(1:6,1:6,IP,cp_en) = math_Mandel3333to66(J_inverse * H_sym)
endif
endif
endif
!--------------------------------------------------------------------------------------------------
! collection of FEM input with returning of randomize odd stress and jacobian
if (iand(mode, CPFEM_BACKUPJACOBIAN) /= 0_pInt) &
CPFEM_dcsde_knownGood = CPFEM_dcsde
if (iand(mode, CPFEM_RESTOREJACOBIAN) /= 0_pInt) &
CPFEM_dcsde = CPFEM_dcsde_knownGood
if (iand(mode, CPFEM_COLLECT) /= 0_pInt) then
call random_number(rnd)
if (rnd < 0.5_pReal) rnd = rnd - 1.0_pReal
materialpoint_Temperature(IP,cp_en) = Temperature
materialpoint_F0(1:3,1:3,IP,cp_en) = ffn
materialpoint_F(1:3,1:3,IP,cp_en) = ffn1
CPFEM_cs(1:6,IP,cp_en) = rnd * CPFEM_odd_stress
CPFEM_dcsde(1:6,1:6,IP,cp_en) = CPFEM_odd_jacobian * math_identity2nd(6)
CPFEM_calc_done = .false.
endif
if (theTime > 0.0_pReal) then
Temperature = materialpoint_Temperature(IP,cp_en) ! homogenized result except for potentially non-isothermal starting condition.
endif
if ((iand(mode, CPFEM_CALCRESULTS) /= 0_pInt) .and. (iand(debug_level(debug_CPFEM), debug_levelExtensive) /= 0_pInt) &
.and. ((debug_e == cp_en .and. debug_i == IP) &
.or. .not. iand(debug_level(debug_CPFEM), debug_levelSelective) /= 0_pInt)) then
!$OMP CRITICAL (write2out)
write(6,'(a,i8,1x,i2,/,12x,6(f10.3,1x)/)') '<< CPFEM >> stress/MPa at el ip ', &
cp_en, IP, CPFEM_cs(1:6,IP,cp_en)/1.0e6_pReal
write(6,'(a,i8,1x,i2,/,6(12x,6(f10.3,1x)/))') '<< CPFEM >> Jacobian/GPa at el ip ', &
cp_en, IP, transpose(CPFEM_dcsdE(1:6,1:6,IP,cp_en))/1.0e9_pReal
flush(6)
!$OMP END CRITICAL (write2out)
endif
!--------------------------------------------------------------------------------------------------
! warn if stiffness close to zero
if (all(abs(CPFEM_dcsdE(1:6,1:6,IP,cp_en)) < 1e-10_pReal)) then
call IO_warning(601,cp_en,IP)
endif
!--------------------------------------------------------------------------------------------------
! remember extreme values of stress and jacobian
if (iand(mode, CPFEM_CALCRESULTS) /= 0_pInt) then
cauchyStress33 = math_Mandel6to33(CPFEM_cs(1:6,IP,cp_en))
if (maxval(cauchyStress33) > debug_stressMax) then
2013-03-06 20:11:15 +05:30
debug_stressMaxLocation = [cp_en, IP]
debug_stressMax = maxval(cauchyStress33)
endif
if (minval(cauchyStress33) < debug_stressMin) then
2013-03-06 20:11:15 +05:30
debug_stressMinLocation = [cp_en, IP]
debug_stressMin = minval(cauchyStress33)
endif
jacobian3333 = math_Mandel66to3333(CPFEM_dcsdE(1:6,1:6,IP,cp_en))
if (maxval(jacobian3333) > debug_jacobianMax) then
2013-03-06 20:11:15 +05:30
debug_jacobianMaxLocation = [cp_en, IP]
debug_jacobianMax = maxval(jacobian3333)
endif
if (minval(jacobian3333) < debug_jacobianMin) then
2013-03-06 20:11:15 +05:30
debug_jacobianMinLocation = [cp_en, IP]
debug_jacobianMin = minval(jacobian3333)
endif
endif
!--------------------------------------------------------------------------------------------------
! copy to output if required (FEM solver)
if(present(cauchyStress)) cauchyStress = CPFEM_cs(1:6,IP,cp_en)
if(present(jacobian)) jacobian = CPFEM_dcsdE(1:6,1:6,IP,cp_en)
end subroutine CPFEM_general
end module CPFEM