24 lines
1.1 KiB
Plaintext
24 lines
1.1 KiB
Plaintext
Registers involved:
|
||
|
||
GPIO:
|
||
DDRB: Data Direction Register for Port B= 0xFF for output
|
||
|
||
|
||
PWM Module:
|
||
OCR0A: Output Compare Register A=Value here is compared with the Timer value,and when the value matches, the specific pin[pin OC0A(pin 13) in this case] gets toggled
|
||
|
||
TCCR0A: Timer/Counter 0 Control Register A = 0x83
|
||
Bit [7:6]= COM0A-Compare Output Mode A = 10-Non-inverting PWM-Clear OC0A on Compare Match
|
||
Bit [1:0]= WGM[1:0]- Waveform Generation Mode=11- for non-inverting fast PWM.
|
||
|
||
TCCR0B: Timer/Counter 0 Control Register B = 0x03
|
||
Bit [2:0] – CS0[2:0]-Clock Select = 011- for prescaler=64 in order to obtain frequency of 1kHz
|
||
|
||
OCR2A: Output Compare Register A=Value here is compared with the Timer value,and when the value matches, the specific pin[pin OC2A(pin 10) in this case] gets toggled
|
||
|
||
TCCR2A: Timer/Counter 2 Control Register A = 0xC3
|
||
Bit [7:6]= COM0A-Compare Output Mode A = 11-Inverting PWM-Clear OC2A on Compare Match
|
||
Bit [1:0]= WGM[1:0]- Waveform Generation Mode=11- for fast PWM.
|
||
|
||
TCCR2B: Timer/Counter 2 Control Register B = 0x04
|
||
Bit [2:0] – CS0[2:0]-Clock Select = 100- for prescaler=64 in order to obtain frequency of 1kHz |