308 lines
12 KiB
C
308 lines
12 KiB
C
/*
|
|
dp8390.h
|
|
|
|
Created: before Dec 28, 1992 by Philip Homburg
|
|
*/
|
|
|
|
/* National Semiconductor DP8390 Network Interface Controller. */
|
|
|
|
/* Page 0, for reading ------------- */
|
|
#define DP_CR 0x0 /* Read side of Command Register */
|
|
#define DP_CLDA0 0x1 /* Current Local Dma Address 0 */
|
|
#define DP_CLDA1 0x2 /* Current Local Dma Address 1 */
|
|
#define DP_BNRY 0x3 /* Boundary Pointer */
|
|
#define DP_TSR 0x4 /* Transmit Status Register */
|
|
#define DP_NCR 0x5 /* Number of Collisions Register */
|
|
#define DP_FIFO 0x6 /* Fifo ?? */
|
|
#define DP_ISR 0x7 /* Interrupt Status Register */
|
|
#define DP_CRDA0 0x8 /* Current Remote Dma Address 0 */
|
|
#define DP_CRDA1 0x9 /* Current Remote Dma Address 1 */
|
|
#define DP_DUM1 0xA /* unused */
|
|
#define DP_DUM2 0xB /* unused */
|
|
#define DP_RSR 0xC /* Receive Status Register */
|
|
#define DP_CNTR0 0xD /* Tally Counter 0 */
|
|
#define DP_CNTR1 0xE /* Tally Counter 1 */
|
|
#define DP_CNTR2 0xF /* Tally Counter 2 */
|
|
|
|
/* Page 0, for writing ------------- */
|
|
#define DP_CR 0x0 /* Write side of Command Register */
|
|
#define DP_PSTART 0x1 /* Page Start Register */
|
|
#define DP_PSTOP 0x2 /* Page Stop Register */
|
|
#define DP_BNRY 0x3 /* Boundary Pointer */
|
|
#define DP_TPSR 0x4 /* Transmit Page Start Register */
|
|
#define DP_TBCR0 0x5 /* Transmit Byte Count Register 0 */
|
|
#define DP_TBCR1 0x6 /* Transmit Byte Count Register 1 */
|
|
#define DP_ISR 0x7 /* Interrupt Status Register */
|
|
#define DP_RSAR0 0x8 /* Remote Start Address Register 0 */
|
|
#define DP_RSAR1 0x9 /* Remote Start Address Register 1 */
|
|
#define DP_RBCR0 0xA /* Remote Byte Count Register 0 */
|
|
#define DP_RBCR1 0xB /* Remote Byte Count Register 1 */
|
|
#define DP_RCR 0xC /* Receive Configuration Register */
|
|
#define DP_TCR 0xD /* Transmit Configuration Register */
|
|
#define DP_DCR 0xE /* Data Configuration Register */
|
|
#define DP_IMR 0xF /* Interrupt Mask Register */
|
|
|
|
/* Page 1, read/write -------------- */
|
|
#define DP_CR 0x0 /* Command Register */
|
|
#define DP_PAR0 0x1 /* Physical Address Register 0 */
|
|
#define DP_PAR1 0x2 /* Physical Address Register 1 */
|
|
#define DP_PAR2 0x3 /* Physical Address Register 2 */
|
|
#define DP_PAR3 0x4 /* Physical Address Register 3 */
|
|
#define DP_PAR4 0x5 /* Physical Address Register 4 */
|
|
#define DP_PAR5 0x6 /* Physical Address Register 5 */
|
|
#define DP_CURR 0x7 /* Current Page Register */
|
|
#define DP_MAR0 0x8 /* Multicast Address Register 0 */
|
|
#define DP_MAR1 0x9 /* Multicast Address Register 1 */
|
|
#define DP_MAR2 0xA /* Multicast Address Register 2 */
|
|
#define DP_MAR3 0xB /* Multicast Address Register 3 */
|
|
#define DP_MAR4 0xC /* Multicast Address Register 4 */
|
|
#define DP_MAR5 0xD /* Multicast Address Register 5 */
|
|
#define DP_MAR6 0xE /* Multicast Address Register 6 */
|
|
#define DP_MAR7 0xF /* Multicast Address Register 7 */
|
|
|
|
/* Bits in dp_cr */
|
|
#define CR_STP 0x01 /* Stop: software reset */
|
|
#define CR_STA 0x02 /* Start: activate NIC */
|
|
#define CR_TXP 0x04 /* Transmit Packet */
|
|
#define CR_DMA 0x38 /* Mask for DMA control */
|
|
#define CR_DM_NOP 0x00 /* DMA: No Operation */
|
|
#define CR_DM_RR 0x08 /* DMA: Remote Read */
|
|
#define CR_DM_RW 0x10 /* DMA: Remote Write */
|
|
#define CR_DM_SP 0x18 /* DMA: Send Packet */
|
|
#define CR_DM_ABORT 0x20 /* DMA: Abort Remote DMA Operation */
|
|
#define CR_PS 0xC0 /* Mask for Page Select */
|
|
#define CR_PS_P0 0x00 /* Register Page 0 */
|
|
#define CR_PS_P1 0x40 /* Register Page 1 */
|
|
#define CR_PS_P2 0x80 /* Register Page 2 */
|
|
#define CR_PS_T1 0xC0 /* Test Mode Register Map */
|
|
|
|
/* Bits in dp_isr */
|
|
#define ISR_PRX 0x01 /* Packet Received with no errors */
|
|
#define ISR_PTX 0x02 /* Packet Transmitted with no errors */
|
|
#define ISR_RXE 0x04 /* Receive Error */
|
|
#define ISR_TXE 0x08 /* Transmit Error */
|
|
#define ISR_OVW 0x10 /* Overwrite Warning */
|
|
#define ISR_CNT 0x20 /* Counter Overflow */
|
|
#define ISR_RDC 0x40 /* Remote DMA Complete */
|
|
#define ISR_RST 0x80 /* Reset Status */
|
|
|
|
/* Bits in dp_imr */
|
|
#define IMR_PRXE 0x01 /* Packet Received iEnable */
|
|
#define IMR_PTXE 0x02 /* Packet Transmitted iEnable */
|
|
#define IMR_RXEE 0x04 /* Receive Error iEnable */
|
|
#define IMR_TXEE 0x08 /* Transmit Error iEnable */
|
|
#define IMR_OVWE 0x10 /* Overwrite Warning iEnable */
|
|
#define IMR_CNTE 0x20 /* Counter Overflow iEnable */
|
|
#define IMR_RDCE 0x40 /* DMA Complete iEnable */
|
|
|
|
/* Bits in dp_dcr */
|
|
#define DCR_WTS 0x01 /* Word Transfer Select */
|
|
#define DCR_BYTEWIDE 0x00 /* WTS: byte wide transfers */
|
|
#define DCR_WORDWIDE 0x01 /* WTS: word wide transfers */
|
|
#define DCR_BOS 0x02 /* Byte Order Select */
|
|
#define DCR_LTLENDIAN 0x00 /* BOS: Little Endian */
|
|
#define DCR_BIGENDIAN 0x02 /* BOS: Big Endian */
|
|
#define DCR_LAS 0x04 /* Long Address Select */
|
|
#define DCR_BMS 0x08 /* Burst Mode Select
|
|
* Called Loopback Select (LS) in
|
|
* later manuals. Should be set. */
|
|
#define DCR_AR 0x10 /* Autoinitialize Remote */
|
|
#define DCR_FTS 0x60 /* Fifo Threshold Select */
|
|
#define DCR_2BYTES 0x00 /* 2 bytes */
|
|
#define DCR_4BYTES 0x40 /* 4 bytes */
|
|
#define DCR_8BYTES 0x20 /* 8 bytes */
|
|
#define DCR_12BYTES 0x60 /* 12 bytes */
|
|
|
|
/* Bits in dp_tcr */
|
|
#define TCR_CRC 0x01 /* Inhibit CRC */
|
|
#define TCR_ELC 0x06 /* Encoded Loopback Control */
|
|
#define TCR_NORMAL 0x00 /* ELC: Normal Operation */
|
|
#define TCR_INTERNAL 0x02 /* ELC: Internal Loopback */
|
|
#define TCR_0EXTERNAL 0x04 /* ELC: External Loopback LPBK=0 */
|
|
#define TCR_1EXTERNAL 0x06 /* ELC: External Loopback LPBK=1 */
|
|
#define TCR_ATD 0x08 /* Auto Transmit Disable */
|
|
#define TCR_OFST 0x10 /* Collision Offset Enable (be nice) */
|
|
|
|
/* Bits in dp_tsr */
|
|
#define TSR_PTX 0x01 /* Packet Transmitted (without error)*/
|
|
#define TSR_DFR 0x02 /* Transmit Deferred, reserved in
|
|
* later manuals. */
|
|
#define TSR_COL 0x04 /* Transmit Collided */
|
|
#define TSR_ABT 0x08 /* Transmit Aborted */
|
|
#define TSR_CRS 0x10 /* Carrier Sense Lost */
|
|
#define TSR_FU 0x20 /* FIFO Underrun */
|
|
#define TSR_CDH 0x40 /* CD Heartbeat */
|
|
#define TSR_OWC 0x80 /* Out of Window Collision */
|
|
|
|
/* Bits in tp_rcr */
|
|
#define RCR_SEP 0x01 /* Save Errored Packets */
|
|
#define RCR_AR 0x02 /* Accept Runt Packets */
|
|
#define RCR_AB 0x04 /* Accept Broadcast */
|
|
#define RCR_AM 0x08 /* Accept Multicast */
|
|
#define RCR_PRO 0x10 /* Physical Promiscuous */
|
|
#define RCR_MON 0x20 /* Monitor Mode */
|
|
|
|
/* Bits in dp_rsr */
|
|
#define RSR_PRX 0x01 /* Packet Received Intact */
|
|
#define RSR_CRC 0x02 /* CRC Error */
|
|
#define RSR_FAE 0x04 /* Frame Alignment Error */
|
|
#define RSR_FO 0x08 /* FIFO Overrun */
|
|
#define RSR_MPA 0x10 /* Missed Packet */
|
|
#define RSR_PHY 0x20 /* Multicast Address Match */
|
|
#define RSR_DIS 0x40 /* Receiver Disabled */
|
|
#define RSR_DFR 0x80 /* In later manuals: Deferring */
|
|
|
|
typedef struct dp_rcvhdr
|
|
{
|
|
u8_t dr_status; /* Copy of rsr */
|
|
u8_t dr_next; /* Pointer to next packet */
|
|
u8_t dr_rbcl; /* Receive Byte Count Low */
|
|
u8_t dr_rbch; /* Receive Byte Count High */
|
|
} dp_rcvhdr_t;
|
|
|
|
#define DP_PAGESIZE 256
|
|
|
|
/* Some macros to simplify accessing the dp8390 */
|
|
#define inb_reg0(dep, reg) (inb(dep->de_dp8390_port+reg))
|
|
#define outb_reg0(dep, reg, data) (outb(dep->de_dp8390_port+reg, data))
|
|
#define inb_reg1(dep, reg) (inb(dep->de_dp8390_port+reg))
|
|
#define outb_reg1(dep, reg, data) (outb(dep->de_dp8390_port+reg, data))
|
|
|
|
/* Software interface to the dp8390 driver */
|
|
|
|
struct dpeth;
|
|
struct iovec_dat;
|
|
struct iovec_dat_s;
|
|
typedef void(*dp_initf_t) (struct dpeth *dep);
|
|
typedef void(*dp_stopf_t) (struct dpeth *dep);
|
|
typedef void(*dp_user2nicf_t) (struct dpeth *dep, struct iovec_dat
|
|
*iovp, vir_bytes offset, int nic_addr, vir_bytes count);
|
|
typedef void(*dp_user2nicf_s_t) (struct dpeth *dep, struct iovec_dat_s
|
|
*iovp, vir_bytes offset, int nic_addr, vir_bytes count);
|
|
typedef void(*dp_nic2userf_t) (struct dpeth *dep, int nic_addr, struct
|
|
iovec_dat *iovp, vir_bytes offset, vir_bytes count);
|
|
typedef void(*dp_nic2userf_s_t) (struct dpeth *dep, int nic_addr, struct
|
|
iovec_dat_s *iovp, vir_bytes offset, vir_bytes count);
|
|
#if 0
|
|
typedef void(*dp_getheaderf_t) (struct dpeth *dep, int page, struct
|
|
dp_rcvhdr *h, u16_t *eth_type);
|
|
#endif
|
|
typedef void(*dp_getblock_t) (struct dpeth *dep, int page, size_t
|
|
offset, size_t size, void *dst);
|
|
|
|
/* iovectors are handled IOVEC_NR entries at a time. */
|
|
#define IOVEC_NR 16
|
|
|
|
typedef int irq_hook_t;
|
|
|
|
typedef struct iovec_dat
|
|
{
|
|
iovec_t iod_iovec[IOVEC_NR];
|
|
int iod_iovec_s;
|
|
endpoint_t iod_proc_nr;
|
|
vir_bytes iod_iovec_addr;
|
|
} iovec_dat_t;
|
|
|
|
typedef struct iovec_dat_s
|
|
{
|
|
iovec_s_t iod_iovec[IOVEC_NR];
|
|
int iod_iovec_s;
|
|
int iod_proc_nr;
|
|
cp_grant_id_t iod_grant;
|
|
vir_bytes iod_iovec_offset;
|
|
} iovec_dat_s_t;
|
|
|
|
#define SENDQ_NR 2 /* Maximum size of the send queue */
|
|
#define SENDQ_PAGES 6 /* 6 * DP_PAGESIZE >= 1514 bytes */
|
|
|
|
typedef struct dpeth
|
|
{
|
|
/* The de_base_port field is the starting point of the probe.
|
|
* The conf routine also fills de_linmem and de_irq. If the probe
|
|
* routine knows the irq and/or memory address because they are
|
|
* hardwired in the board, the probe should modify these fields.
|
|
* Futhermore, the probe routine should also fill in de_initf and
|
|
* de_stopf fields with the appropriate function pointers and set
|
|
* de_prog_IO iff programmed I/O is to be used.
|
|
*/
|
|
port_t de_base_port;
|
|
phys_bytes de_linmem;
|
|
char *de_locmem;
|
|
int de_irq;
|
|
int de_int_pending;
|
|
irq_hook_t de_hook;
|
|
dp_initf_t de_initf;
|
|
dp_stopf_t de_stopf;
|
|
int de_prog_IO;
|
|
char de_name[sizeof("dp8390#n")];
|
|
|
|
/* The initf function fills the following fields. Only cards that do
|
|
* programmed I/O fill in the de_pata_port field.
|
|
* In addition, the init routine has to fill in the sendq data
|
|
* structures.
|
|
*/
|
|
ether_addr_t de_address;
|
|
port_t de_dp8390_port;
|
|
port_t de_data_port;
|
|
int de_16bit;
|
|
int de_ramsize;
|
|
int de_offset_page;
|
|
int de_startpage;
|
|
int de_stoppage;
|
|
|
|
#if ENABLE_PCI
|
|
/* PCI config */
|
|
char de_pci; /* TRUE iff PCI device */
|
|
#endif
|
|
|
|
/* Do it yourself send queue */
|
|
struct sendq
|
|
{
|
|
int sq_filled; /* this buffer contains a packet */
|
|
int sq_size; /* with this size */
|
|
int sq_sendpage; /* starting page of the buffer */
|
|
} de_sendq[SENDQ_NR];
|
|
int de_sendq_nr;
|
|
int de_sendq_head; /* Enqueue at the head */
|
|
int de_sendq_tail; /* Dequeue at the tail */
|
|
|
|
/* Fields for internal use by the dp8390 driver. */
|
|
int de_flags;
|
|
int de_mode;
|
|
eth_stat_t de_stat;
|
|
iovec_dat_s_t de_read_iovec_s;
|
|
iovec_dat_s_t de_write_iovec_s;
|
|
iovec_dat_s_t de_tmp_iovec_s;
|
|
vir_bytes de_read_s;
|
|
endpoint_t de_client;
|
|
message de_sendmsg;
|
|
dp_user2nicf_s_t de_user2nicf_s;
|
|
dp_nic2userf_s_t de_nic2userf_s;
|
|
dp_getblock_t de_getblockf;
|
|
} dpeth_t;
|
|
|
|
#define DEI_DEFAULT 0x8000
|
|
|
|
#define DEF_EMPTY 0x000
|
|
#define DEF_PACK_SEND 0x001
|
|
#define DEF_PACK_RECV 0x002
|
|
#define DEF_SEND_AVAIL 0x004
|
|
#define DEF_READING 0x010
|
|
#define DEF_PROMISC 0x040
|
|
#define DEF_MULTI 0x080
|
|
#define DEF_BROAD 0x100
|
|
#define DEF_ENABLED 0x200
|
|
#define DEF_STOPPED 0x400
|
|
|
|
#define DEM_DISABLED 0x0
|
|
#define DEM_SINK 0x1
|
|
#define DEM_ENABLED 0x2
|
|
|
|
#if !__minix_vmd
|
|
#define debug 0 /* Standard Minix lacks debug variable */
|
|
#endif
|
|
|
|
/*
|
|
* $PchId: dp8390.h,v 1.10 2005/02/10 17:26:06 philip Exp $
|
|
*/
|