minix3/drivers/net/dec21140A/dec21140A.h

234 lines
8.1 KiB
C

#ifndef INCL_DEC21041_H_GUARD
#define INCL_DEC21041_H_GUARD
/*
de.h
Header for the driver of the DEC 21140A ethernet card as emulated
by VirtualPC 2007
Created: 09/01/2009 Nicolas Tittley (first.last @ gmail DOT com)
*/
#include <sys/null.h>
#define DE_FKEY 7 /* Shift+ this value will dump info on console */
#define NOT(x) (~(x))
#if debug == 1
# define DEBUG(statm) statm
#else
# define DEBUG(statm)
#endif
#define SA_ADDR_LEN sizeof(ether_addr_t)
#define DE_NB_SEND_DESCR 32
#define DE_SEND_BUF_SIZE (ETH_MAX_PACK_SIZE+2)
#define DE_NB_RECV_DESCR 32
#define DE_RECV_BUF_SIZE (ETH_MAX_PACK_SIZE+2)
#define IOVEC_NR 16
#define DE_MIN_BASE_ADDR 0x0400
#define DE_SROM_EA_OFFSET 20
#define DE_SETUP_FRAME_SIZE 192
typedef struct iovec_dat_s {
iovec_s_t iod_iovec[IOVEC_NR];
int iod_iovec_s;
endpoint_t iod_proc_nr;
cp_grant_id_t iod_grant;
vir_bytes iod_iovec_offset;
} iovec_dat_s_t;
typedef struct de_descr {
u32_t des[4];
} de_descr_t;
typedef struct de_local_descr {
de_descr_t *descr;
u8_t *buf1;
u8_t *buf2;
} de_loc_descr_t;
typedef struct dpeth {
message rx_return_msg; /* Holds VREAD message until int */
message tx_return_msg; /* Holds VWRITE message until int */
char de_name[32]; /* Name of this interface */
port_t de_base_port; /* Base port, for multiple card instance */
int de_irq; /* IRQ line number */
int de_hook; /* interrupt hook at kernel */
int de_type; /* What kind of hardware */
ether_addr_t de_address; /* Ethernet Address */
eth_stat_t de_stat; /* Stats */
unsigned long bytes_tx; /* Number of bytes sent */
unsigned long bytes_rx; /* Number of bytes recv */
/* Space reservation. We will allocate all structures later in the code.
here we just make sure we have the space we need at compile time */
u8_t sendrecv_descr_buf[(DE_NB_SEND_DESCR+DE_NB_RECV_DESCR)*
sizeof(de_descr_t)];
u8_t sendrecv_buf[DE_NB_SEND_DESCR*DE_SEND_BUF_SIZE +
DE_NB_RECV_DESCR*DE_RECV_BUF_SIZE];
phys_bytes sendrecv_descr_phys_addr[2];
de_loc_descr_t descr[2][MAX(DE_NB_RECV_DESCR, DE_NB_SEND_DESCR)];
int cur_descr[2];
#define DESCR_RECV 0
#define DESCR_TRAN 1
int de_flags; /* Send/Receive mode (Configuration) */
#define DEF_EMPTY 0x0000
#define DEF_READING 0x0001
#define DEF_RECV_BUSY 0x0002
#define DEF_ACK_RECV 0x0004
#define DEF_SENDING 0x0010
#define DEF_XMIT_BUSY 0x0020
#define DEF_ACK_SEND 0x0040
#define DEF_PROMISC 0x0100
#define DEF_MULTI 0x0200
#define DEF_BROAD 0x0400
#define DEF_ENABLED 0x2000
#define DEF_STOPPED 0x4000
int de_mode; /* Status of the Interface */
#define DEM_DISABLED 0x0000
#define DEM_SINK 0x0001
#define DEM_ENABLED 0x0002
/* Serial ROM */
#define SROM_BITWIDTH 6
u8_t srom[((1<<SROM_BITWIDTH)-1)*2]; /* Space to read in
all the configuration ROM */
/* Temporary storage for RECV/SEND requests */
iovec_dat_s_t de_read_iovec;
iovec_dat_s_t de_write_iovec;
vir_bytes de_read_s;
vir_bytes de_send_s;
endpoint_t de_client;
} dpeth_t;
/************/
/* Revisons */
/************/
#define DEC_21140A 0x20
#define DE_TYPE_UNKNOWN 0x0
/* #define CSR_ADDR(x, i) csraddr2(x->de_base_port + i) */
#define CSR_ADDR(x, i) (x->de_base_port + i)
/* CSRs */
#define CSR0 0x00
#define CSR0_SWR 0x00000001 /* sw reset */
#define CSR0_BAR 0x00000002 /* bus arbitration */
#define CSR0_CAL_8 0x00004000 /* cache align 8 long word */
#define CSR0_TAP 0x00080000 /* trans auto polling */
#define CSR1 0x08 /* transmit poll demand */
#define CSR2 0x10 /* receive poll demand */
#define CSR3 0x18 /* receive list address */
#define CSR4 0x20 /* transmit list address */
#define CSR5 0x28 /* status register */
#define CSR5_EB 0x03800000 /* error bits */
#define CSR5_TS 0x00700000 /* Transmit proc state */
#define CSR5_RS 0x000E0000 /* Receive proc state */
#define CSR5_NIS 0x00010000 /* Norm Int summ */
#define CSR5_AIS 0x00008000 /* Abnorm Int sum */
#define CSR5_FBE 0x00002000 /* Fatal bit error */
#define CSR5_GTE 0x00000800 /* Gen-purp timer exp */
#define CSR5_ETI 0x00000400 /* Early Trans int */
#define CSR5_RWT 0x00000200 /* Recv watchdog timeout */
#define CSR5_RPS 0x00000100 /* Recv proc stop */
#define CSR5_RU 0x00000080 /* Recv buf unavail */
#define CSR5_RI 0x00000040 /* Recv interrupt */
#define CSR5_UNF 0x00000020 /* Trans underflow */
#define CSR5_TJT 0x00000008 /* Trans Jabber Timeout */
#define CSR5_TU 0x00000004 /* Trans buf unavail */
#define CSR5_TPS 0x00000002 /* Trans proc stopped */
#define CSR5_TI 0x00000001 /* Trans interrupt */
#define CSR6 0x30 /* Operation mode */
#define CSR6_SC 0x80000000 /* Special capt effect ena 31 */
#define CSR6_RA 0x40000000 /* receive all 30 */
#define CSR6_MBO 0x02000000 /* must be one 25 */
#define CSR6_SCR 0x01000000 /* Scrambler mode 24 */
#define CSR6_PCS 0x00800000 /* PCS function 23 */
#define CSR6_TTM 0x00400000 /* Trans threshold mode 22 */
#define CSR6_SF 0x00200000 /* store and forward 21 */
#define CSR6_HBD 0x00080000 /* Heartbeat disable 19 */
#define CSR6_PS 0x00040000 /* port select 18 */
#define CSR6_CA 0x00020000 /* Capt effect ena 17 */
#define CSR6_TR_00 0x00000000 /* Trans thresh 15:14 */
#define CSR6_TR_01 0x00004000 /* Trans thresh 15:14 */
#define CSR6_TR_10 0x00008000 /* Trans thresh 15:14 */
#define CSR6_TR_11 0x0000C000 /* Trans thresh 15:14 */
#define CSR6_ST 0x00002000 /* start/stop trans 13 */
#define CSR6_FD 0x00000200 /* Full Duplex 9 */
#define CSR6_PM 0x00000080 /* Pass all multicast 7 */
#define CSR6_PR 0x00000040 /* Promisc mode 6 */
#define CSR6_IF 0x00000010 /* Inv filtering 4 */
#define CSR6_HO 0x00000004 /* Hash-only filtering 2 */
#define CSR6_SR 0x00000002 /* start/stop recv 1 */
#define CSR6_HP 0x00000001 /* Hash/perfect recv filt mode 0 */
#define CSR7 0x38 /* Interrupt enable */
#define CSR7_NI 0x00010000 /* Normal interrupt ena */
#define CSR7_AI 0x00008000 /* Abnormal int ena */
#define CSR7_TI 0x00000001 /* trans int ena */
#define CSR7_TU 0x00000004 /* trans buf unavail ena */
#define CSR7_RI 0x00000040 /* recv interp ena */
#define CSR7_GPT 0x00000800 /* gen purpose timer ena */
#define CSR9 0x48 /* Boot Rom, serial ROM, MII */
#define CSR9_SR 0x0800 /* serial ROM select */
#define CSR9_RD 0x4000 /* read */
#define CSR9_DO 0x0008 /* data out */
#define CSR9_DI 0x0004 /* data in */
#define CSR9_SRC 0x0002 /* serial clock */
#define CSR9_CS 0x0001 /* serial rom chip select */
/* Send/Recv Descriptors */
#define DES0 0
#define DES0_OWN 0x80000000 /* descr ownership. 1=211140A */
#define DES0_FL 0x3FFF0000 /* frame length */
#define DES0_FL_SHIFT 16 /* shift to fix frame length */
#define DES0_ES 0x00008000 /* Error sum */
#define DES0_TO 0x00004000 /* Trans jabber timeout */
#define DES0_LO 0x00000800 /* Loss of carrier */
#define DES0_NC 0x00000400 /* no carrier */
#define DES0_LC 0x00000200 /* Late coll */
#define DES0_EC 0x00000100 /* Excessive coll */
#define DES0_UF 0x00000002 /* Underflow error */
#define DES0_RE 0x00000008 /* MII error */
#define DES0_FS 0x00000200 /* first descr */
#define DES0_LS 0x00000100 /* last descr */
#define DES1 1
#define DES1_ER 0x02000000 /* end of ring */
#define DES1_SAC 0x01000000 /* 2nd address chained */
#define DES1_BS2 0x003FF800 /* 2nd buffer size */
#define DES1_BS2_SHFT 11 /* shift to obtain 2nd buffer size */
#define DES1_BS1 0x000007FF /* 1nd buffer size */
#define DES1_IC 0x80000000 /* Interrupt on completion 31 */
#define DES1_LS 0x40000000 /* Last Segment 30 */
#define DES1_FS 0x20000000 /* First Segment 29 */
#define DES1_FT1 0x10000000 /* Filtering type 28 */
#define DES1_SET 0x08000000 /* Setup frame 27 */
#define DES1_AC 0x04000000 /* Add CRC disable 26 */
#define DES1_DPD 0x00800000 /* Disabled padding 23 */
#define DES1_FT0 0x00400000 /* Filtering type 22 */
#define DES2 2 /* 1st buffer addr */
#define DES3 3 /* 2nd buffer addr */
#define DES_BUF1 DES2
#define DES_BUF2 DES3
#endif /* Include Guard */