minix3/drivers/eeprom/cat24c256/cat24c256.c

517 lines
12 KiB
C
Raw Normal View History

2020-02-21 00:59:27 +05:30
#include <minix/blockdriver.h>
#include <minix/com.h>
#include <minix/drivers.h>
#include <minix/ds.h>
#include <minix/i2c.h>
#include <minix/i2cdriver.h>
#include <minix/log.h>
#include <stdio.h>
#include <stdlib.h>
/* constants */
#define NR_DEVS 1 /* number of devices this driver handles */
#define EEPROM_DEV 0 /* index of eeprom device */
/* When passing data over a grant one needs to pass
* a buffer to sys_safecopy copybuff is used for that*/
#define COPYBUF_SIZE 0x1000 /* 4k buff */
static unsigned char copybuf[COPYBUF_SIZE];
static i2c_addr_t valid_addrs[9] = {
0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x00
};
/* SEF functions and variables. */
static void sef_local_startup(void);
static int sef_cb_init(int type, sef_init_info_t * info);
static int sef_cb_lu_state_save(int);
static int lu_state_restore(void);
/* libblockdriver callbacks */
static int cat24c256_blk_open(devminor_t minor, int access);
static int cat24c256_blk_close(devminor_t minor);
static ssize_t cat24c256_blk_transfer(devminor_t minor, int do_write,
u64_t pos, endpoint_t endpt, iovec_t * iov, unsigned int count, int flags);
static int cat24c256_blk_ioctl(devminor_t minor, unsigned long request,
endpoint_t endpt, cp_grant_id_t grant, endpoint_t user_endpt);
static struct device *cat24c256_blk_part(devminor_t minor);
static void cat24c256_blk_other(message * m, int ipc_status);
/* Entry points into the device dependent code of block drivers. */
struct blockdriver cat24c256_tab = {
.bdr_type = BLOCKDRIVER_TYPE_OTHER,
.bdr_open = cat24c256_blk_open,
.bdr_close = cat24c256_blk_close,
.bdr_transfer = cat24c256_blk_transfer,
.bdr_ioctl = cat24c256_blk_ioctl, /* always returns ENOTTY */
.bdr_part = cat24c256_blk_part,
.bdr_other = cat24c256_blk_other /* for notify events from DS */
};
static int cat24c256_read128(uint16_t memaddr, void *buf, size_t buflen, int flags);
static int cat24c256_read(uint16_t memaddr, void *buf, size_t buflen, int flags);
static int cat24c256_write16(uint16_t memaddr, void *buf, size_t buflen, int flags);
static int cat24c256_write(uint16_t memaddr, void *buf, size_t buflen, int flags);
/* globals */
/* counts the number of times a device file is open */
static int openct[NR_DEVS];
/* base and size of each device */
static struct device geom[NR_DEVS];
/* the bus that this device is on (counting starting at 1) */
static uint32_t bus;
/* slave address of the device */
static i2c_addr_t address;
/* endpoint for the driver for the bus itself. */
static endpoint_t bus_endpoint;
/* logging - use with log_warn(), log_info(), log_debug(), log_trace(), etc */
static struct log log = {
.name = "cat24c256",
.log_level = LEVEL_INFO,
.log_func = default_log
};
static int
cat24c256_blk_open(devminor_t minor, int access)
{
log_trace(&log, "cat24c256_blk_open(%d,%d)\n", minor, access);
if (cat24c256_blk_part(minor) == NULL) {
return ENXIO;
}
openct[minor]++;
return OK;
}
static int
cat24c256_blk_close(devminor_t minor)
{
log_trace(&log, "cat24c256_blk_close(%d)\n", minor);
if (cat24c256_blk_part(minor) == NULL) {
return ENXIO;
}
if (openct[minor] < 1) {
log_warn(&log, "closing unopened device %d\n", minor);
return EINVAL;
}
openct[minor]--;
return OK;
}
static ssize_t
cat24c256_blk_transfer(devminor_t minor, int do_write, u64_t pos64,
endpoint_t endpt, iovec_t * iov, unsigned int nr_req, int flags)
{
/* Read or write one the driver's block devices. */
unsigned int count;
struct device *dv;
u64_t dv_size;
int r;
u64_t position;
cp_grant_id_t grant;
ssize_t total = 0;
vir_bytes offset;
log_trace(&log, "cat24c256_blk_transfer()\n");
/* Get minor device information. */
dv = cat24c256_blk_part(minor);
if (dv == NULL) {
return ENXIO;
}
if (nr_req > NR_IOREQS) {
return EINVAL;
}
dv_size = dv->dv_size;
if (pos64 > dv_size) {
return OK; /* Beyond EOF */
}
position = pos64;
offset = 0;
while (nr_req > 0) {
/* How much to transfer and where to / from. */
count = iov->iov_size;
grant = (cp_grant_id_t) iov->iov_addr;
/* check for EOF */
if (position >= dv_size) {
return total;
}
/* don't go past the end of the device */
if (position + count > dv_size) {
count = dv_size - position;
}
/* don't overflow copybuf */
if (count > COPYBUF_SIZE) {
count = COPYBUF_SIZE;
}
log_trace(&log, "transfering 0x%x bytes\n", count);
if (do_write) {
r = sys_safecopyfrom(endpt, grant, (vir_bytes) offset,
(vir_bytes) copybuf, count);
if (r != OK) {
log_warn(&log, "safecopyfrom failed\n");
return EINVAL;
}
r = cat24c256_write(position, copybuf, count, flags);
if (r != OK) {
log_warn(&log, "write failed (r=%d)\n", r);
return r;
}
} else {
r = cat24c256_read(position, copybuf, count, flags);
if (r != OK) {
log_warn(&log, "read failed (r=%d)\n", r);
return r;
}
r = sys_safecopyto(endpt, grant, (vir_bytes) offset,
(vir_bytes) copybuf, count);
if (r != OK) {
log_warn(&log, "safecopyto failed\n");
return EINVAL;
}
}
/* Book the number of bytes transferred. */
position += count;
total += count;
offset += count;
/* only go on to the next iov when this one is full */
if ((iov->iov_size -= count) == 0) {
iov++;
nr_req--;
offset = 0;
}
}
return total;
}
static int
cat24c256_blk_ioctl(devminor_t minor, unsigned long request, endpoint_t endpt,
cp_grant_id_t grant, endpoint_t UNUSED(user_endpt))
{
log_trace(&log, "cat24c256_blk_ioctl(%d)\n", minor);
/* no supported ioctls for this device */
return ENOTTY;
}
static struct device *
cat24c256_blk_part(devminor_t minor)
{
log_trace(&log, "cat24c256_blk_part(%d)\n", minor);
if (minor < 0 || minor >= NR_DEVS) {
return NULL;
}
return &geom[minor];
}
static void
cat24c256_blk_other(message * m, int ipc_status)
{
log_trace(&log, "cat24c256_blk_other(0x%x)\n", m->m_type);
if (is_ipc_notify(ipc_status)) {
if (m->m_source == DS_PROC_NR) {
log_debug(&log,
"bus driver changed state, update endpoint\n");
i2cdriver_handle_bus_update(&bus_endpoint, bus,
address);
}
} else
log_warn(&log, "Invalid message type (0x%x)\n", m->m_type);
}
/* The lower level i2c interface can only read/write 128 bytes at a time.
* One might want to do more I/O than that at once w/EEPROM, so there is
* cat24c256_read() and cat24c256_read128(). cat24c256_read128() does the
* actual reading in chunks up to 128 bytes. cat24c256_read() splits
* the request up into chunks and repeatedly calls cat24c256_read128()
* until all of the requested EEPROM locations have been read.
*/
static int
cat24c256_read128(uint16_t memaddr, void *buf, size_t buflen, int flags)
{
int r;
minix_i2c_ioctl_exec_t ioctl_exec;
if (buflen > I2C_EXEC_MAX_BUFLEN || buf == NULL
|| (((uint16_t) (memaddr + buflen)) < memaddr)) {
log_warn(&log,
"buflen exceeded max or buf == NULL or would overflow\n");
return -1;
}
memset(&ioctl_exec, '\0', sizeof(minix_i2c_ioctl_exec_t));
ioctl_exec.iie_op = I2C_OP_READ_WITH_STOP;
ioctl_exec.iie_addr = address;
/* set the memory address to read from */
if ((BDEV_NOPAGE & flags) == BDEV_NOPAGE) {
/* reading within the current page */
ioctl_exec.iie_cmd[0] = (memaddr & 0xff);
ioctl_exec.iie_cmdlen = 1;
} else {
ioctl_exec.iie_cmd[0] = ((memaddr >> 8) & 0xff);
ioctl_exec.iie_cmd[1] = (memaddr & 0xff);
ioctl_exec.iie_cmdlen = 2;
}
ioctl_exec.iie_buflen = buflen;
r = i2cdriver_exec(bus_endpoint, &ioctl_exec);
if (r != OK) {
return r;
}
/* call was good, copy results to caller's buffer */
memcpy(buf, ioctl_exec.iie_buf, buflen);
log_debug(&log, "Read %d bytes from 0x%x 0x%x OK\n", buflen,
ioctl_exec.iie_cmd[0], ioctl_exec.iie_cmd[1]);
return OK;
}
int
cat24c256_read(uint16_t memaddr, void *buf, size_t buflen, int flags)
{
int r;
uint16_t i;
if (buf == NULL || ((memaddr + buflen) < memaddr)) {
log_warn(&log, "buf == NULL or would overflow\n");
return -1;
}
for (i = 0; i < buflen; i += 128) {
r = cat24c256_read128(memaddr + i, buf + i,
((buflen - i) < 128) ? (buflen - i) : 128, flags);
if (r != OK) {
return r;
}
log_trace(&log, "read %d bytes starting at 0x%x\n",
((buflen - i) < 128) ? (buflen - i) : 128, memaddr + i);
}
return OK;
}
static int
cat24c256_write16(uint16_t memaddr, void *buf, size_t buflen, int flags)
{
int r;
int addrlen;
minix_i2c_ioctl_exec_t ioctl_exec;
if (buflen > (I2C_EXEC_MAX_BUFLEN - 2) || buf == NULL
|| (((uint16_t) (memaddr + buflen + 2)) < memaddr)) {
log_warn(&log,
"buflen exceeded max or buf == NULL or would overflow\n");
return -1;
}
memset(&ioctl_exec, '\0', sizeof(minix_i2c_ioctl_exec_t));
ioctl_exec.iie_op = I2C_OP_WRITE_WITH_STOP;
ioctl_exec.iie_addr = address;
ioctl_exec.iie_cmdlen = 0;
/* set the memory address to write to */
if ((BDEV_NOPAGE & flags) == BDEV_NOPAGE) {
/* writing within the current page */
ioctl_exec.iie_buf[0] = (memaddr & 0xff); /* address */
addrlen = 1;
} else {
ioctl_exec.iie_buf[0] = ((memaddr >> 8) & 0xff);/* page */
ioctl_exec.iie_buf[1] = (memaddr & 0xff); /* address */
addrlen = 2;
}
memcpy(ioctl_exec.iie_buf + addrlen, buf, buflen);
ioctl_exec.iie_buflen = buflen + addrlen;
r = i2cdriver_exec(bus_endpoint, &ioctl_exec);
if (r != OK) {
return r;
}
log_debug(&log, "Wrote %d bytes to 0x%x 0x%x OK - First = 0x%x\n",
buflen, ioctl_exec.iie_buf[0], ioctl_exec.iie_buf[1],
ioctl_exec.iie_buf[2]);
return OK;
}
int
cat24c256_write(uint16_t memaddr, void *buf, size_t buflen, int flags)
{
int r;
uint16_t i;
if (buf == NULL || ((memaddr + buflen) < memaddr)) {
log_warn(&log, "buf == NULL or would overflow\n");
return -1;
}
for (i = 0; i < buflen; i += 16) {
r = cat24c256_write16(memaddr + i, buf + i,
((buflen - i) < 16) ? (buflen - i) : 16, flags);
if (r != OK) {
return r;
}
log_trace(&log, "wrote %d bytes starting at 0x%x\n",
((buflen - i) < 16) ? (buflen - i) : 16, memaddr + i);
}
return OK;
}
static int
sef_cb_lu_state_save(int UNUSED(state))
{
ds_publish_u32("bus", bus, DSF_OVERWRITE);
ds_publish_u32("address", address, DSF_OVERWRITE);
return OK;
}
static int
lu_state_restore(void)
{
/* Restore the state. */
u32_t value;
ds_retrieve_u32("bus", &value);
ds_delete_u32("bus");
bus = (int) value;
ds_retrieve_u32("address", &value);
ds_delete_u32("address");
address = (int) value;
return OK;
}
static int
sef_cb_init(int type, sef_init_info_t * UNUSED(info))
{
int r;
if (type == SEF_INIT_LU) {
/* Restore the state. */
lu_state_restore();
}
geom[EEPROM_DEV].dv_base = ((u64_t) (0));
geom[EEPROM_DEV].dv_size = ((u64_t) (32768));
/* look-up the endpoint for the bus driver */
bus_endpoint = i2cdriver_bus_endpoint(bus);
if (bus_endpoint == 0) {
log_warn(&log, "Couldn't find bus driver.\n");
return EXIT_FAILURE;
}
/* claim the EEPROM device */
r = i2cdriver_reserve_device(bus_endpoint, address);
if (r != OK) {
log_warn(&log, "Couldn't reserve device 0x%x (r=%d)\n",
address, r);
return EXIT_FAILURE;
}
if (type != SEF_INIT_LU) {
/* sign up for updates about the i2c bus going down/up */
r = i2cdriver_subscribe_bus_updates(bus);
if (r != OK) {
log_warn(&log, "Couldn't subscribe to bus updates\n");
return EXIT_FAILURE;
}
i2cdriver_announce(bus);
blockdriver_announce(type);
log_debug(&log, "announced\n");
}
return OK;
}
static void
sef_local_startup(void)
{
/*
* Register init callbacks. Use the same function for all event types
*/
sef_setcb_init_fresh(sef_cb_init);
sef_setcb_init_lu(sef_cb_init);
sef_setcb_init_restart(sef_cb_init);
/*
* Register live update callbacks.
*/
/* Agree to update immediately when LU is requested in a valid state. */
sef_setcb_lu_prepare(sef_cb_lu_prepare_always_ready);
/* Support live update starting from any standard state. */
sef_setcb_lu_state_isvalid(sef_cb_lu_state_isvalid_standard);
/* Register a custom routine to save the state. */
sef_setcb_lu_state_save(sef_cb_lu_state_save);
/* Let SEF perform startup. */
sef_startup();
}
int
main(int argc, char *argv[])
{
int r;
env_setargs(argc, argv);
r = i2cdriver_env_parse(&bus, &address, valid_addrs);
if (r < 0) {
log_warn(&log, "Expecting -args 'bus=X address=0xYY'\n");
log_warn(&log, "Example -args 'bus=3 address=0x54'\n");
return EXIT_FAILURE;
} else if (r > 0) {
log_warn(&log,
"Invalid slave address for device, expecting 0x50-0x57\n");
return EXIT_FAILURE;
}
sef_local_startup();
log_debug(&log, "Startup Complete\n");
blockdriver_task(&cat24c256_tab);
log_debug(&log, "Shutting down\n");
return OK;
}